summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* armv8/ls2085a: Update LS2085a PCIe compatiblePrabhakar Kushwaha2015-07-20-1/+2
| | | | | | | | | Compatible field "fsl,20851a-pcie" is not correct. So update it to "fsl,ls2085a-pcie" Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085a: Enable "date" command for QDS and RDBPriyanka Jain2015-07-20-0/+2
| | | | | | | | Enable "date" command for QDS and RDB boards Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085ardb: add hwconfig setting for eSDHCYangbo Lu2015-07-20-0/+2
| | | | | | | | | Add hwconfig setting for eSDHC since it shares some pins with other IP block. Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8/ls2085ardb: Add eth & phy firmware loading supportPrabhakar Kushwaha2015-07-20-0/+23
| | | | | | | | | | Add support for board eth initialization and support for loading phy firmware. PHY firmware needs to be loaded from board_eth_init() because all the MACs are not initialized by ldpaa_eth driver. Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-07-15-16/+10
|\
| * dm: x86: minnowmax: Move PCI to use driver modelSimon Glass2015-07-14-0/+1
| | | | | | | | | | | | | | | | | | Adjust minnowmax to use driver model for PCI. This requires adding a device tree node to specify the ranges, removing the board-specific PCI code and ensuring that the host bridge is configured. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: spi: Enable environment for minnowmaxSimon Glass2015-07-14-3/+2
| | | | | | | | | | | | | | | | Enable a SPI environment and store it in a suitable place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * x86: crownbay: Enable graphics supportBin Meng2015-07-14-7/+7
| | | | | | | | | | | | | | | | | | | | | | Enable graphics support on Intel Crown Bay board With the help of vgabios for Intel TunnelCreek IGD. Tested with an external LVDS panel connected to X4 connector and SDVO adapter connected to X9 connector on the board. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Move VGA option rom macros to KconfigBin Meng2015-07-14-6/+0
| | | | | | | | | | | | | | | | | | | | Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on HAVE_VGA_BIOS. The new names are consistent with other x86 binary blob options like HAVE_FSP/FSP_FILE/FSP_ADDR. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-07-14-3/+18
|\ \ | |/ |/|
| * stv0991: enable cadence qspi controller & spi flashVikas Manocha2015-07-03-0/+15
| | | | | | | | | | | | | | | | This patch does all the board configurations required to use the qspi controller & attached spi flash memory. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: remove define CONFIG_OF_SEPARATE from board fileVikas Manocha2015-07-03-1/+0
| | | | | | | | | | | | | | | | CONFIG_OF_SEPARATE is default define with CONFIG_OF_CONTROL, removing this define from the board file to avoid multiple definition warning. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: move OF_CONTROL config to defconfigVikas Manocha2015-07-03-1/+0
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: enable saving enrironment in spi flashVikas Manocha2015-07-03-1/+3
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2015-07-10-0/+41
|\ \
| * | arm: mvebu: db-88f6820-gp: Add USB/EHCI supportStefan Roese2015-07-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enabled the USB/EHCI support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) supportStefan Roese2015-07-10-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Configure and enable the SATA/SCSI (AHCI) support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38xStefan Roese2015-07-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the common AHCI controller on the Marvell Armada 38x. Tested on the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: db-88f6820-gp: Add MMC/SDIO supportStefan Roese2015-07-10-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds MMC/SDIO support to the Marvell DB-88F6820-GP board configuration. Including support for the common partitions and filesystems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | | arm: baltos: change USB ports functionsYegor Yefremov2015-07-09-2/+2
| | | | | | | | | | | | | | | | | | | | | Baltos has USB0 connected to a USB hub and thus is host-only. USB1 is connected to microUSB connector and thus should use OTG mode. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | | keystone2: config: update default mtdMichael Scherban2015-07-08-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Because it is possible for the MTD number to change, causing a filesystem mount failure, we should use the volume name instead of the MTD number and let Linux resolve the correct one. Signed-off-by: Mike Scherban <m-scherban@ti.com>
* | | stm32f4: fix gpio description in commentAntonio Borneo2015-07-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On STM32F429 gpio PC6/PC7 can be allocated for USART6, as reported in the comment. But current code in drivers/serial/serial_stm32.c uses a different gpio mapping (PG14/PG9) for USART6. Fix the comment to match current code in the driver. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: u-boot@lists.denx.de To: Kamil Lulko <rev13@wp.pl> Cc: Tom Rini <trini@konsulko.com>
* | | stm32f4: fix minor typo in commentAntonio Borneo2015-07-08-1/+1
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: u-boot@lists.denx.de To: Kamil Lulko <rev13@wp.pl> Cc: Tom Rini <trini@konsulko.com>
* | | siemens,am33x: adjust mtd partitionEgli, Samuel2015-07-08-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Roger Meier <r.meier@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
* | | arm: baltos: fix NAND bootYegor Yefremov2015-07-08-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | Specify proper U-Boot offset, enable prefetch mode, increase bootm size and add FIT fallback, if board_name is not present in kernel-fit.itb image. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | | arm: baltos: drop I2C speed to 1000 HzYegor Yefremov2015-07-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This action is need to make I2C communication with PMIC stable for low temperature. Print current I2C speed in SPL for visual control. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | | arm: baltos: enable CMD_NET and FIT support in defconfigYegor Yefremov2015-07-08-2/+0
| | | | | | | | | | | | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | arm: convert am3517_crane and am3517_evm to generic boardsYegor Yefremov2015-07-08-0/+2
|/ / | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to board's config header. Boot-tested on am3517_evm board. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-07-03-10/+10
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | Conflicts: configs/tbs2910_defconfig configs/tqma6q_mba6_mmc_defconfig configs/tqma6q_mba6_spi_defconfig configs/tqma6s_mba6_mmc_defconfig configs/tqma6s_mba6_spi_defconfig include/configs/mx6_common.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * colibri_vf: Increase console IO buffer size to 1024Sanchayan Maity2015-07-03-1/+1
| | | | | | | | | | | | | | | | Increase console IO buffer size to 1024 from the previous value of 256. The previous value was too short for editing environment variables like ubiboot from the console. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
| * mx6cuboxi: drop options that are duplicated in mx6_commonPeter Robinson2015-06-27-8/+0
| | | | | | | | | | | | | | These options were merged into mx6_common and were seemingly missed in mx6cuboxi so drop the duplicates Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * Drop duplicate CONFIG_SYS_NO_FLASH from mx6_commonPeter Robinson2015-06-27-1/+0
| | | | | | | | | | | | It's defind earlier in the file Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * arm: imx6: tqma6: add kconfig to board headerMarkus Niebel2015-06-27-0/+1
| | | | | | | | | | | | | | this is needed later to have Kconfig generated stuff as define. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-06-15-966/+26
| |\
| * | tbs2910: add PRE_CONSOLE_BUFFER supportSoeren Moch2015-06-09-0/+4
| | | | | | | | | | | | | | | | | | Add PRE_CONSOLE_BUFFER support to display early boot messages over HDMI. Signed-off-by: Soeren Moch <smoch@web.de>
| * | tbs2910: add thermal supportSoeren Moch2015-06-09-0/+2
| | | | | | | | | | | | Signed-off-by: Soeren Moch <smoch@web.de>
| * | imx6: novena: Reinstate missing CONFIG_FAT_WRITEMarek Vasut2015-06-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a380ce6e9698257c4e8be4c0711b09c90a8febff removed CONFIG_FAT_WRITE from novena.h , so Novena lost ability to write FAT partitions. Add this functionality back. Signed-off-by: Marek Vasut <marex at denx.de> Cc: Peter Robinson <pbrobinson at gmail.com> Cc: Stefano Babic <sbabic at denx.de>
* | | defconfig: Move CONFIG_SPI_FLASH_BAR from configsJagan Teki2015-07-01-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This commit moves: - CONFIG_SPI_FLASH_BAR from include/configs/*.h into configs/*_defconfigs Signed-off-by: Jagan Teki <jteki@openedev.com>
* | | sf: dataflash: Rename to CONFIG_SPI_FLASH_DATAFLASHJagan Teki2015-07-01-1/+1
| | | | | | | | | | | | | | | | | | | | | Rename CONFIG_SF_DATAFLASH into CONFIG_SPI_FLASH_DATAFLASH as it follows the naming convention same as remaining configs. Signed-off-by: Jagan Teki <jteki@openedev.com>
* | | arm: ls102xa: Enable Driver Model SPI for ls1021atwrHaikun Wang2015-06-30-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable Driver Model SPI for ls1021atwr board. DSPI and QSPI only be enabled when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Tested-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | | arm: ls102xa: Enable Driver Model SPI for ls1021aqdsHaikun Wang2015-06-30-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable Driver Model SPI for ls1021aqds board. DSPI and QSPI is enabled only when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Tested-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2015-06-28-0/+7
|\ \ \
| * | | db-88f6820-gp.h: Load data blobs into lower memoryKevin Smith2015-06-28-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default on this platform, u-boot loads data into high memory in the range of 0x7Fxxxxxx, which generates a data abort when the kernel tries to read it. Config the u-boot environment to load the device tree and initrd image into lower memory to make them accessible to the kernel. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de>
| * | | mv-common.h: Include support for device treesKevin Smith2015-06-28-0/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Stefan Roese <sr@denx.de>
* | | | Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal ↵Ian Campbell2015-06-28-30/+0
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND memory" This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Conflicts: include/configs/sun6i.h include/configs/sun8i.h
* | | Move defaults from config_cmd_default.h to KconfigJoe Hershberger2015-06-25-1680/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Move default y configs out of arch/board KconfigJoe Hershberger2015-06-25-131/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | siemens,am33x,thuban: rename dxr2 to thubanHeiko Schocher2015-06-19-14/+8
| | | | | | | | | | | | | | | | | | | | | | | | Update new naming scheme. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | siemens,am33x,rastaban: add rastaban configHeiko Schocher2015-06-19-0/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rastaban is a draco version with more flash, more RAM and faster CPU. Number of partitions is the same but rootfs partition is different. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: BeagleBoard-X15: Enable VTT regulatorLokesh Vutla2015-06-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard-X15 uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-10-10 22:33:06 +0000