summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* mpc83xx: Set guarded bit on BAT that covers the end of the address spaceScott Wood2009-04-01-6/+10
| | | | | | | | | | | | | | | | | The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of address space; however, not all of this space is covered by a device. In particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped at the far end of the address space. In zlib, there is a loop that references p[-1] if p is non-NULL. Under some circumstances, this leads to the CPU speculatively loading from 0xfffffff8 if p is NULL. This leads to a machine check. Signed-off-by: Scott Wood <scottwood@freescale.com> continuation to the remaining mpc83xx boards that suffer from the same problem. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* 86xx: Cleanup MP supportKumar Gala2009-04-01-0/+2
| | | | | | | | | | | | | | * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx * Introduce determine_mp_bootpg() helper. We'll need this to address a bug introduced in v2009.03 with 86xx MP booting. We have to make sure to reserve the region of memory used for the MP bootpg() so other u-boot code doesn't use it. * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to allow cmd_mp.c to build and work. In the future we should look at implementing all these functions. This could be common w/85xx if we use spin tables on 86xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC85xx: Add MPC8569MDS board supportHaiying Wang2009-03-30-0/+454
| | | | | | | | | This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 83xx: Use common LSDMR defines from asm/fsl_lbc.hKumar Gala2009-03-30-172/+31
| | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* 85xx: Use common LSDMR defines from asm/fsl_lbc.hKumar Gala2009-03-30-242/+61
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* inka4x0: Add hardware diagnosis and RTC in configuration.Detlev Zundel2009-03-30-5/+85
| | | | | | | | This patch adds the board specific communication routines needed by the external 4543 RTC. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Andreas Pfefferle <ap@denx.de>
* inka4x0: Add hardware diagnosis functions for inka4x0Detlev Zundel2009-03-30-0/+1
| | | | | | | This patch adds advanced diagnosis functions for the inka4x0 board. Signed-off-by: Andreas Pfefferle <ap@denx.de> Signed-off-by: Detlev Zundel <dzu@denx.de>
* ppc: cleanup compiler errors/warningsHeiko Schocher2009-03-27-0/+1
| | | | | | | | | | | | | Current u-boot top of tree builds with warnings/errors for the following boards: ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823 RPXClassic debris PN62 following patch solves this. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2009-03-26-5/+100
|\
| * at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.Nicolas Ferre2009-03-22-5/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board. It is essentially the same, with a few minor differences. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91sam9/at91cap: move nand drivers to drivers/mtd/nandJean-Christophe PLAGNIOL-VILLARD2009-03-22-0/+53
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91sam9/at91cap: move common led management to cpuJean-Christophe PLAGNIOL-VILLARD2009-03-22-0/+29
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-03-26-0/+5
|\ \
| * | OMAP3:Beagle: Enable mtdpartsNishanth Menon2009-03-25-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts provides a flexible way to create and maintain u-boot mtd partitions. This allows commands such as "nand erase fs" to work and the user no longer needs to decode the absolute nand offsets. This patch enables this function for beagleboard Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | ads5121: enable instruction cacheWolfgang Denk2009-03-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling the instruction cache significantly accelerates U-Boot operations like CRC checking, image uncompression, etc. Kudos to Andrea Scian for pointing out. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-03-25-936/+744
|\ \ \
| * | | Blackfin: bf537-stamp: increase monitor sizeMike Frysinger2009-03-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new jffs2 code pushed the code size just over the limit, so increase the limit a bit more. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: bf537-stamp: bump default SCLK up to 125MHzMike Frysinger2009-03-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since all of the bf537-stamp and bf537-ezkit boards out there can handle it, increase the speed of SCLK to 125MHz rather than 100MHz. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: add clkin_hz= to default kernel command line for ADI boardsMike Frysinger2009-03-24-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: bf533-stamp: bump up default clocksMike Frysinger2009-03-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the hardware can handle it, bump the default clocks from 80mhz SCLK and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: bf533-stamp: rewrite startup LED notificationsMike Frysinger2009-03-24-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Again, don't clobber pins that we aren't actually using, and use the common LED framework rather than our own hob-job-but-not-really-working. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | | Blackfin: unify common ADI board settingsMike Frysinger2009-03-24-937/+719
| |/ / | | | | | | | | | | | | | | | | | | | | | Rather than duplicate the same ADI settings in every ADI board, create a common ADI config header and have all ADI boards start using that. This will also make merging the ~10 boards I have to forward port a lot easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | Add multi-chip NAND support for the TQM8548 modulesWolfgang Grandegger2009-03-23-25/+7
|/ / | | | | | | | | | | | | | | | | This patches configures the NAND UPM-FSL driver with multi-chip support for the Micron MT29F8G08FAB NAND flash memory on the TQM8548 modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'mimc200'Haavard Skinnemoen2009-03-23-11/+11
|\ \ | |/ |/|
| * Merge branch 'mimc200' into nextHaavard Skinnemoen2009-02-23-3/+3
| |\ | | | | | | | | | | | | | | | | | | Conflicts: board/mimc/mimc200/mimc200.c include/configs/mimc200.h
| | * MIMC200 board now uses CONFIG_DISABLE_CONSOLEMark Jackson2008-10-05-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE. Also fixed default uImage location. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | Merge branch 'cleanups' into nextHaavard Skinnemoen2009-02-23-8/+8
| |\ \
| | * \ Merge branch 'fixes' into cleanupsHaavard Skinnemoen2008-12-17-38745/+40369
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/atmel/atngw100/atngw100.c board/atmel/atstk1000/atstk1000.c cpu/at32ap/at32ap700x/gpio.c include/asm-avr32/arch-at32ap700x/clk.h include/configs/atngw100.h include/configs/atstk1002.h include/configs/atstk1003.h include/configs/atstk1004.h include/configs/atstk1006.h include/configs/favr-32-ezkit.h include/configs/hammerhead.h include/configs/mimc200.h
| | * | | avr32: refactor the portmux/gpio codeHaavard Skinnemoen2008-09-01-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Separate the portmux configuration functionality from the GPIO pin control API. - Separate the controller-specific code from the chip-specific code. - Allow "ganged" port configuration (multiple pins at once). - Add more flexibility to the "canned" peripheral select functions: - Allow using more than 23 address bits, more chip selects, as well as NAND- and CF-specific pins. - Make the MACB SPEED pin optional, and choose between MII/RMII using a parameter instead of an #ifdef. - Make it possible to use other MMC slots than slot 0, and support different MMC/SDCard data bus widths. - Use more reasonable pull-up defaults; floating pins may consume a lot of power. - Get rid of some custom portmux code from the mimc200 board code. The old gpio/portmux API couldn't really handle its requirements, but the new one can. - Add documentation. The end result is slightly smaller code for all boards. Which isn't really the point, but at least it isn't any larger. This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if the board maintainers could help me test this on their boards. In particular, the mimc200 port has lost a lot of code, so I'm hoping Mark can help me out. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Mark Jackson <mpfj@mimc.co.uk> Cc: Alex Raimondi <alex.raimondi@miromico.ch> Cc: Julien May <julien.may@miromico.ch> Changes since v1: * Enable pullup on NWAIT * Add missing include to portmux-pio.h * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
* | | | | Separate mtdparts command from jffs2Stefan Roese2009-03-20-111/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the mtdparts commands are included in the jffs2 command support. This doesn't make sense anymore since other commands (e.g. UBI) use this infrastructure as well now. This patch separates the mtdparts commands from the jffs2 commands making it possible to only select mtdparts when no JFFS2 support is needed. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | | | | Add support for the digsy MTC board.Grzegorz Bernacki2009-03-20-0/+346
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the InterControl custom device based on the MPC5200B chip. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | | | | ppc4xx: Use correct io accessors for esd 405/440 boardsMatthias Fuchs2009-03-20-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32 macros. Also volatile pointer references are replaced by the new accessors. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | ppc4xx: Update TEXT_BASE for DASA_SIM boardsMatthias Fuchs2009-03-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix building DASA_SIM boards by increasing U-Boot's size in flash. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | ppc4xx: DU405 maintenance fixMatthias Fuchs2009-03-20-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -strip unused features -fix resetting phy Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | ppc4xx: Abort autoboot only by space key on CPCI405 boardsMatthias Fuchs2009-03-20-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | Add basic relocation to i386 portGraeme Russ2009-03-20-0/+4
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* | | | | Rewrite i386 interrupt handlingGraeme Russ2009-03-20-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rewrite interrupt handling functionality for the i386 port. Separated functionality into separate CPU and Architecture components. It appears as if the i386 interrupt handler functionality was intended to allow multiple handlers to be installed for a given interrupt. Unfortunately, this functionality was not fully implemented and also had the problem that irq_free_handler() does not allow the passing of the handler function pointer and therefore could never be used to free specific handlers that had been installed for a given IRQ. There were also various issues with array bounds not being fully tested. I had two objectives in mind for the new implementation: 1) Keep the implementation as similar as possible to existing implementations. To that end, I have used the leon2/3 implementations as the reference 2) Seperate CPU and Architecture specific elements. All specific i386 interrupt functionality is now in cpu/i386/ with the high level API and architecture specific code in lib_i386. Functionality specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has been further split out into an individual file to allow for the implementation of the PIC architecture of the SC520 CPU (supports more IRQs) Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
* | | | | Rename SC520 Configuration OptionsGraeme Russ2009-03-20-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Options are now all uniformly CONFIG_SYS_SC520_<option> Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
* | | | | cmc_pu2: get mac address from environmentMike Frysinger2009-03-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The environment is the canonical storage location of the mac address, so we're killing off the global data location and moving everything to querying the env directly. Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to handle this board specially in common ARM code. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com>
* | | | | boards: move board_get_enetaddr() into board-specific initMike Frysinger2009-03-20-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The environment is the canonical storage location of the mac address, so we're killing off the global data location and moving everything to querying the env directly. Rather than have the common ppc code have board-specific hooks, move the board_get_enetaddr() function into the board-specific init functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Ben Warren <biggerbadderben@gmail.com>
* | | | | mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.cGrzegorz Bernacki2009-03-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select. To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by Total5200 and will be used by digsy MTC and other boards with ATA CS on I2C pins. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | | | | 8xx: add support for new keymile kmsupx4 board.Heiko Schocher2009-03-18-10/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU - serial console on SMC1 - 32 MB SDRAM - 32 MB NOR Flash - Ethernet over SCC3 - I2C Bitbang Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | 8xx, mgsuvd: rename board to a more generic nameHeiko Schocher2009-03-18-283/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make mgsuvd_config" remains. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | 8xx, mgsuvd: Coding Style cleanup config fileHeiko Schocher2009-03-18-26/+31
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | powerpc: common updates for keymile boardsHeiko Schocher2009-03-18-139/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added to keymile-common.h: - bootcount support - COMMAND HISTORY - CONFIG_AUTO_COMPLETE - CONFIG_SYS_FLASH_PROTECTION - JFFS2 support - CONFIG_VERSION_VARIABLE - extracted common I2C settings for all boards - common default environment settings summarized Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | 8xx, icache: enabling ICache not before running from RAMHeiko Schocher2009-03-18-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache is not enabled before code runs from RAM. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | 82xx, mgcoge: fix environment sector sizeHeiko Schocher2009-03-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Size of one environment sector is 0x20000. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | NetStar: config reindentationLadislav Michl2009-03-18-19/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix indentation broken by symbol renames. "Sort" driver related definitons. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* | | | | ColdFire: Provide gzip image size V2 & V3 platformsTsiChung Liew2009-03-17-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Default gzip bootm size is 8MB. Some platforms require more than 8MB Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | sh: Fix cannot work rtl8139 on r2dplusYoshihiro Shimoda2009-03-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory registration. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-11-30 07:41:26 +0000