summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* a4m072: support for SHOW_BOOT_PROGRESS feature using LED displayIlya Yanok2010-10-12-0/+2
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for displaying boot progress codes on a4m072 board using LED display. As we can display only one symbol at any time on the hardware (two symbols with blinking) we can't display progress codes directly and have to map them to 2-symbol codes. We use the following mapping on the a4m972 board: [1, 8] U [100, 108] -> 5 [-9, -1] U [-101, -100] U [-113, -103] -> -5 [9, 14] U [120, 123] U [125, 129] -> 8 [-13, -10] U [-122, -120] U [-127, -124] U {-129} -> -8 {15} -> 9 [-32, -30] -> -A [-40, -35] U [-51, -42] U [-58, -53] U [-83, -80] U {-64, -130, -140, -150} -> -B Other progress code are ignored. One symbol codes are displayed steady while two-symbol codes are displayed using blinking. Boot progress codes are displayed with decimal got unset (as opposed to 'display' command output). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* a4m072: led display supportIlya Yanok2010-10-12-2/+10
| | | | | | | | This patch adds support for LED display on a4m072 board. Hardware is capable of displaying only one symbol at any time. We support displaying two symbols in software (via blinking). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* led_display: split led display support into generic and hw-dependent partsIlya Yanok2010-10-12-0/+6
| | | | | | | | | | | Split the display command into generic interface and hardware-specific realization for PDSP188x LED display found on hmi1001 and manroland boards. Simple interface for LED displays is defined in include/led-display.h and described in doc/README.LED_display. Driver-specific implementation was moved into drivers/misc/pdsp188x.c file (enabled with CONFIG_PDSP188x set). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* A4M072: Added support for the board.Sergei Poselenov2010-10-12-0/+377
| | | | | | | | | | | | | | | | This patch provides support for the A4M072 board with the following features: UART NOR flash FEC Ethernet External SRAM I2C EEPROM CompactFlash cards on IDE/ATA port USB Host PCI initialization The 7-segment LED indicator is not yet supported. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2010-10-12-107/+129
|\
| * microblaze: Add support for NET_MULTI apiMichal Simek2010-10-12-0/+2
| | | | | | | | | | | | Microblaze hasn't supported NET_MULTI support. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * microblaze: Fix microblaze-generic config fileMichal Simek2010-10-12-104/+123
| | | | | | | | | | | | | | 1. Fix preprocessor statements 2. Clean coding style Signed-off-by: Michal Simek <monstr@monstr.eu>
| * microblaze: generic: rename MTD partition set to 'flash-0'Stephan Linz2010-10-12-4/+4
| | | | | | | | | | Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
| * microblaze: generic: adding DHCP supportStephan Linz2010-10-12-0/+1
| | | | | | | | | | Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
* | NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.cReinhard Meyer (-VC)2010-10-11-2/+2
|/ | | | | | | | | | | | This patch is required before the upcoming new enc28j60 driver using SPI framework patch can be applied: - Move legacy enc28j60.c to enc28j60_lpc2292.c. - Change Makefile and the two affected boards' definition files. Tested with ./MAKEALL ARM7 that both boards still compile. Signed-off-by: Reinhard Meyer<info@emk-elektronik.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Wolfgang Denk2010-10-11-2/+0
|\
| * x86: Make CONFIG_RELOC_FIXUP_WORKS generic for all x86 boardsGraeme Russ2010-10-07-2/+0
| | | | | | | | | | Relocation is not board-specific for the x86 architectrure, so CONFIG_RELOC_FIXUP_WORKS can be defined globally in the config.h
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-10-11-9/+22
|\ \
| * | powerpc/85xx: Add support for 4th PCI controller on corenet_dsKumar Gala2010-10-07-0/+8
| | | | | | | | | | | | | | | | | | | | | We configure the controller but dont have virtual address space thus any devices on the 4th controller are not accessible in u-boot. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/corenet_ds: Various updates to initial env cfgEmil Medve2010-10-07-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Make the U-Boot update command sequence conditional. Helps prevent accidental erasing if an upload or previous step fails * Make it easier to update other FLASH banks * Enable DDR controller cache line interleaving and bank cs0/cs1 by default Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | p1022ds: add audclk hwconfig setting to enable codec reference clockTimur Tabi2010-10-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Freescale P1022DS can use either a 12.288MHz or a 11.2896MHz reference clock for the audio codec, but by default both are disabled. Add a 'audclk' hwconfig option that allows the user to choose which clock he wants. The 12.288MHz clock allows the codec to use sampling rates of 16, 24, 32, 48, 64, and 96KHz. The 11.2896 clock allows 14700, 22050, 29400, 44100, 58800, and 88200Hz. Also configure a pin muxing to select some SSI signals, which will disable I2C1. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | mpc8569mds: fix consuming long time while relocating code.Haiying Wang2010-10-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original code maps boot flash as non-cacheable region. When calling relocate_code in flash to copy u-boot from flash to ddr, every loop copy command is read from flash. The flash read speed will be the bottleneck, which consuming long time to do this operation. To resovle this, map the boot flash as write-through cache via tlb. And set tlb to remap the flash after code executing in ddr, to confirm flash erase operation properly done. Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | mpc8569mds: fix CONFIG_ENV_SIZEHaiying Wang2010-10-07-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | CONFIG_ENV_SIZE of MPC8569MDS was wrongly set to CONFIG_ENV_SECT_SIZE which is 128KB, so it took longer time to do crc32 calculation for ENV than it should do. It causes the bootup for MPC8569MDS significantly slow. This patch fixs it to 0x2000(8KB), also fix the comment for CONFIG_ENV_SECT_SIZE to correct size. Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | PowerPC: change board specific early pci_init() into generic.Andre Schwarz2010-10-06-0/+2
| | | | | | | | Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
* | CCM: remove code for yet another corpseWolfgang Denk2010-10-06-488/+0
| | | | | | | | | | | | | | The CCM board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | PCU_E: remove code for yet another corpseWolfgang Denk2010-10-06-550/+0
|/ | | | | | | The PCU_E board has long reached EOL, and support for it is no longer relevant in current versions of U-Boot. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-10-05-51/+567
|\
| * Blackfin: bf537-pnav: increase monitor lenMike Frysinger2010-10-02-1/+1
| | | | | | | | | | | | | | Building this board for parallel flash fills up the bss section and thus fails to link, so bump up the monitor size a bit. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf527-ad7160-eval: fix GPIO CS defineMike Frysinger2010-10-02-1/+1
| | | | | | | | | | | | Rather than use a hardcoded "7", use the new Blackfin global define. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf548-ezkit: bump SPI flash size upMike Frysinger2010-10-02-1/+5
| | | | | | | | | | | | | | | | The current size used (256KiB) is smaller than the LDR created for the bf548-ezkit, so 'run update' doesn't work correctly. So bump up the size a bit by making this flexible per-board config. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: blackvme: new board portWojtek Skulski2010-10-02-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The board includes: * ADSP-BF561 rev. 0.5 * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG) * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell) * SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB) * FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB) * Spartan6-LX150 (memory-mapped; both PPIs also connected) * See http://www.skutek.com/ Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf526-ezbrd: enable BootROM-OOB layout when booting from NANDMike Frysinger2010-10-02-2/+3
| | | | | | | | | | | | | | | | | | | | We need to use the Blackfin BootROM-specific OOB layout when we boot out of NAND as that is what the on-chip ROM expects. Also need to increase the monitor size a little to accommodate the extra NAND code overhead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: adi config: enable nand lock/unlock supportMike Frysinger2010-10-02-0/+1
| | | | | | | | | | | | | | | | We use the lock/unlock options in our default nand code, so enabl support for the options. Reported-by: Vivi Li <vivi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bct-brettl2: new board portPeter Meerwald2010-10-02-0/+155
| | | | | | | | | | Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: adi config: allow boards to tweak a little moreMike Frysinger2010-10-02-8/+14
| | | | | | | | | | | | Let people easily override bootdelay and network settings. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf527-sdp: new board portMike Frysinger2010-10-02-0/+121
| | | | | | | | | | | | Support for the Blackfin System Development Platform (SDP) base module. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: adi config: add a hook for boards to append the envMike Frysinger2010-10-02-1/+5
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: adi config: add an "all spi flashes" option to unify board listsMike Frysinger2010-10-02-12/+15
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: move CONFIG_BFIN_CPU to board config.mkMike Frysinger2010-10-02-25/+0
| | | | | | | | | | | | | | | | | | The CONFIG_BFIN_CPU option is largely used in the build system, so move it out of the board config.h and into the board config.mk. It'd be nice to keep everything in the config.h, but the patch to extract that value early was rejected. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-10-05-130/+346
|\ \
| * | ppc4xx: Use common ns16550 functions in 4xx UART POST driverStefan Roese2010-10-04-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the PPC4xx POST UART driver to use the common NS16550 functions for receiving and sending. Additionally the local function for SoC divisor setup are removed. Instead the functions from arch/powerpc/cpu/ppc4xx/4xx_uart.c are used. This removes code duplication. Also the common CONFIG_SYS_NS16550_COMx defines are now used to describe the POST UART's. And a compile breakage is fixed, introduced by a git merge of the ppc4xx/next branch into master. Now "ppc4xx.h" is moved to "asm/ppc4xx.h". Fixed as well with this patch. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Big lwmon5 board support rework/updateSascha Laue2010-10-04-124/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch brings the lwmon5 board support up-to-date. Here a summary of the changes: lwmon5 board port related: - GPIO's changed to control the LSB transmitter - Reset USB PHY's upon power-up - Enable CAN upon power-up - USB init error workaround (errata CHIP_6) - EBC: Enable burstmode and modify the timings for the GDC memory - EBC: Speed up NOR flash timings lwmon5 board POST related: - Add FPGA memory test - Add GDC memory test - DSP POST reworked - SYSMON POST: Fix handling of negative temperatures - Add output for sysmon1 POST - HW-watchdog min. time test reworked Additionally some coding-style changes were done. Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | APM821xx: Add bluestone board supportTirumala Marri2010-10-04-0/+178
| |/ | | | | | | | | | | | | | | | | Add support code for bluestone board wth APM821XX processor based. This patch includes early board init, misc init, configure EBC, initializes UIC, MAKEALL, board.cfg and MAINTAINERS file. Signed-off-by: Tirumala R Marri <tmarri@apm.com Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'next' of git://git.denx.de/u-boot-videoWolfgang Denk2010-10-05-5/+14
|\ \ | |/ |/|
| * p1022ds: use weak CFI flash accessors when DIU is enabledTimur Tabi2010-09-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the Freescale P1022, the DIU and the LBC share address pins, which means that when the DIU is active (e.g. the console is on the DVI display), NOR flash cannot be accessed. So we use the weak accessor function feature of the CFI flash code to temporarily switch the pin mux from DIU to LBC whenever we want to read or write flash. This has a significant performance penalty, but it's the only way to make it work. This change allows the 'saveenv' command to work when the video display is enabled. Erasing flash and writing to flash (with the 'cp' command) works, but reading from flash (with the 'md' and 'cp' commands) does not. Also, while flash is being written, the video display will be blank. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * p1022ds: add video supportTimur Tabi2010-09-25-5/+8
| | | | | | | | | | | | | | | | Add support for the DIU controller. If CONFIG_VIDEO is defined, then the console will appear on a DVI monitor instead of the serial port. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'next' of /home/wd/git/u-boot/nextWolfgang Denk2010-09-28-1282/+1142
|\ \ | |/ | | | | | | | | | | Conflicts: include/ppc4xx.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * mpc83xx: extend CONFIG_SYS_BOOTMAPSZ increase to mpc8308_p1mKim Phillips2010-09-23-1/+1
| | | | | | | | | | | | | | continuation of commit 39da1ba923d55f316f9f1bb3a960e4ed91dc17ac: "e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels" Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc8308_p1m: support for MPC8308 P1M boardIlya Yanok2010-09-23-0/+555
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides support for MPC8308 P1M board with the following set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported Both I2C controllers are supported Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * MPC8308RDB: various clean upsIlya Yanok2010-09-23-20/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up the Freescale MPC8308RDB Development board support. Things fixed: - Removed unused PCIE2 definitions from configuration - SICR{L,H} defines used for System I/O Configuration Registers values instead of hardcoding - CONFIG_SYS_SCCR_PCIEXP1CM used to enable PCIE clock instead of writing to SCCR from the board code - sleep mode stuff removed as MPC8308 has no support for deep sleep and PMCCR1 register. board_early_init_f() removed. - MPC8308 has no ERRATA for DDR controller so workaround removed - 'assignment in if statement' issues solved - use LBLAWAR_* defines instead of hardcoding Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernelsIra W. Snyder2010-09-23-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer Linux kernels can overrun the initial memory window used for booting with their BSS area. When this happens, they overwrite the FDT and silently fail to boot. On e300 CPUs, the Linux kernel uses an initial BAT covering the first 256MB of RAM. See arch/powerpc/kernel/head_32.S for details. Increase the value of CONFIG_SYS_BOOTMAPSZ to accommodate the maximum value allowed by Linux. This will allow very large kernels to boot. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc831xerdb: enable mtdparts for NANDScott Wood2010-09-23-2/+16
| | | | | | | | | | | | | | | | | | The default partition table matches the .dts files for these boards in Linux. This allows these partitions to be used by name with U-Boot's "nand" command. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * ppx4xx: remove unused functionality for DU405 boardsMatthias Fuchs2010-09-23-26/+5
| | | | | | | | | | | | | | | | Remove some unused functionality to make U-Boot build again. Especially PCI is not used on the board. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| * Remove unused CONFIG_SERIAL_SOFTWARE_FIFO featureStefan Roese2010-09-23-90/+0
| | | | | | | | | | | | | | | | | | This patch removes the completely unused CONFIG_SERIAL_SOFTWARE_FIFO feature from U-Boot. It has only been implemented for PPC4xx and was not used at all. So let's remove it and make the code smaller and cleaner. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
| * ppc4xx: Use common NS16550 driver for PPC4xx UARTStefan Roese2010-09-23-96/+340
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the PPC4xx UART driver. Instead the common NS16550 driver is used, since all PPC4xx SoC's use this peripheral device. The file 4xx_uart.c now only implements the UART clock calculation function which also sets the SoC internal UART divisors. All PPC4xx board config headers are changed to use this common NS16550 driver now. Tested on these boards: acadia, canyonlands, katmai, kilauea, sequoia, zeus Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-29 17:59:18 +0000