summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* Add CONFIG_HAS_ETH0 to all boards with TSECAndy Fleming2007-08-16-0/+20
| | | | | | | | | The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Update MPC8544 DS PCI memory mapKumar Gala2007-08-16-12/+9
| | | | | | | | | | | The PCIe bus that the ULI M1575 is connected to has no possible way of needing more than the fixed amount of IO & Memory space needed by the ULI. So make it use far less IO & memory space and have it use the shared LAW. This free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed by each bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix up some fdt issues on 8544DSKumar Gala2007-08-16-0/+1
| | | | | | | | It looks like we had a merge issue that duplicated a bit of code in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get the MAC address properly set in the device tree on boot for TSEC1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix numerous bugs in the 8568 UEC supportAndy Fleming2007-08-16-3/+3
| | | | | | | | | | | | | | | | | | | | | Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming <afleming@freescale.com>
* Define tsec flag values in config filesAndy Fleming2007-08-16-18/+53
| | | | | | | | | | The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-15-3/+3
|\
| * 86xx: Fix lingering CFG_CMD_* references in sbc8641d.hJon Loeliger2007-08-15-3/+3
| | | | | | | | | | | | Remove a leftover in net/tftp.c while we're at it. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-15-6143/+13858
|\ \ | |/
| * Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-08-14-16/+1646
| |\
| | * Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-14-6300/+11961
| | |\
| | * \ Merge with /home/stefan/git/u-boot/zeusStefan Roese2007-08-14-0/+848
| | |\ \
| | | * | ppc4xx: Add initial Zeus (PPC405EP) board supportStefan Roese2007-08-14-0/+375
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | | * | ppc4xx: Add support for AMCC 405EP Taihu boardJohn Otken2007-07-26-0/+473
| | | | | | | | | | | | | | | | | | | | Signed-off-by: John Otken <john@softadvances.com>
| | * | | Coding style cleanupStefan Roese2007-08-10-7/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | Add PPC4xx-HCU4 and HCU5 boards: HCU5 configNiklaus Giger2007-08-10-0/+392
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
| | * | | Add PPC4xx-HCU4 and HCU5 boards: HCU4 configNiklaus Giger2007-08-10-0/+343
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
| | * | | ppc4xx: Update lwmon5 POST configurationStefan Roese2007-08-10-2/+19
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | ppc4xx: Update AMCC Bamboo 440EP supportEugene OBrien2007-07-31-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | ppc4xx: Update 440EPx lwmon5 board supportStefan Roese2007-07-31-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Clear ECC status regs after ECC POST test - Set dcbz for ECC generation with caches enabled as default - Code cleanup Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | ppc4xx: lwmon5: Update Lime initializationAnatolij Gustschin2007-07-26-3/+13
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change Lime SDRAM initialization to now support 100MHz and 133MHz (if enabled). Also the framebuffer is initialized to display a blue rectangle with a white border. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| | * | ppc4xx: lwmon5: Support for 128 MByte NOR FLASH addedStefan Roese2007-07-24-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The used Intel NOR FLASH chips have internally two dies, and are now treated as two seperate chips. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | POST: Add ECC POST for the lwmon5 boardPavel Kolesnikov2007-07-20-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ECC Post test for the Lwmon5 board based on PPC440EPx to U-Boot. Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> Acked-by: Yuri Tikhonov <yur@emcraft.com> Acked-by: Stefan Roese <sr@denx.de>
| | * | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-16-4/+362
| | |\ \
| | * | | ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setupStefan Roese2007-07-16-1/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-11-3/+79
| | |\ \ \
| | * | | | ppc4xx: Update lwmon5 default environmentStefan Roese2007-07-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | ppc4xx: Update lwmon5 boardStefan Roese2007-07-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add unlock=yes environment variable to default variables to unlock the CFI flash by default. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | Add MACH_TYPE records for several AT91 boards.Peter Pearse2007-08-14-0/+5
| | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge to two at45.c files into a common file, split to at45.c and spi.c Fix spelling error in DM9161 PHY Support. Initialize at91rm9200 board (and set LED). Add PIO control for at91rm9200dk LEDs and Mux. Change dataflash partition boundaries to be compatible with Linux 2.6. Signed-off-by: Peter Pearse <peter.pearse@arm.com> Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
| * | | | 85xxCDS: Add make targets for legacy systems.Randy Vinson2007-08-14-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI ID select values on the Arcadia main board differ depending on the version of the hardware. The standard configuration supports Rev 3.1. The legacy target supports Rev 2.x. Signed-off-by Randy Vinson <rvinson@mvista.com>
| * | | | Add support for UEC to 8568Andy Fleming2007-08-14-7/+49
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | Add PCI support for MPC8568MDS boardHaiying Wang2007-08-14-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is against u-boot-mpc85xx.git of www.denx.com Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
| * | | | Fix minor 85xx warningsAndy Fleming2007-08-14-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some patches had inserted warnings into the build: * mpc8560ads declared data without using it * cpu_init declared ecm and immap without using it in all CONFIGs * MPC8548CDS.h had its default filenames changed so that they contained "\m" in the paths. Made the defaults not Windows-specific (or anything-specific) Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | 8548cds PCIE support.Ed Swarthout2007-08-14-106/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the early L1 cache stack region guarded to prevent speculative fetches outside the locked range. Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. init.S whitespace cleanup. Allow TEXT_BASE value to be specified on command line. This allows it to be set to 0xfffc0000 which cuts the uboot binary in half. Clear and enable lbc and ecm errors. Update last_busno in device-tree for pci and pcie. Remove load of obsolete cpu/mpc85xx/pci.0 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
| * | | | 8544ds PCIE supportEd Swarthout2007-08-14-56/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. Enable LBC and ECM errors and clear error registers. Add tftpflash env var to get uboot from tftp server and flash it. Add pci/pcie convenience env vars to display register space: "run pcie3regs" to see all pcie3 ccsr registers "run pcie3cfg" to see all cfg registers Whitespace cleanup and MPC8544DS.h Enable CONFIG_INTERRUPTS. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
| * | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-08-13-0/+604
| |\ \ \ \
| | * \ \ \ Merge commit 'remotes/wd/master'Jon Loeliger2007-08-13-59/+646
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAKEALL With any luck, this is the last MAKEALL merge conflict!
| | * | | | | Modify SBC8641D to use new Freescale PCI routinesJoe Hamman2007-08-13-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT adapter. Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> Signde-off-by: Jon Loeliger <jdl@freescale.com>
| | * | | | | Add support for SBC8641D. Config files.Joe Hamman2007-08-10-0/+599
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Wind River's SBC8641D reference board. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Jon Loeliger <jdl@freescale.com>
| * | | | | | Minor coding style cleanup. Update CHANGELOG.Wolfgang Denk2007-08-13-20/+1
| | |/ / / / | |/| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | | Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/masterWolfgang Denk2007-08-12-5/+29
| |\ \ \ \ \
| | * | | | | Adapt board configuration and fix kernel crash on MCC200 board.Wolfgang Denk2007-08-12-5/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The update procedure was modified to turn off the USB subsystem before exit for MCC200 and TRAB. This is necessary as otherwise the USB controller continues to write periodically to system memory! MCC200-specific notes: - the patch disables the magic key check for MCC200 - the patch contains the configuration changes made for the new revision of the board. Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | | | Adjust default configuration of ADS5121 board.Wolfgang Denk2007-08-12-28/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | | | Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.Wolfgang Denk2007-08-12-26/+19
| |/ / / / / | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-10-3/+583
| |\ \ \ \ \ | | |/ / / /
| | * | | | mpc83xx: add support for the MPC8323E RDBKim Phillips2007-08-10-0/+583
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8323E based board with 64MB fixed SDRAM, 16MB flash, five 10/100 ethernet ports connected via an ICPlus IP175C switch, one PCI slot, and serial. Features not supported in this patch are SD card interface, 2 USB ports, and the two phone ports. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| | * | | | TQM834x: cleanup configuratonMartin Krause2007-08-10-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove irritating #undef DEBUG Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | [ARM] TI DaVinci support, hopefully finalSergey Kubushyn2007-08-10-0/+580
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
| * | | | Merge with /home/wd/git/u-boot/custodian/u-boot-usbWolfgang Denk2007-08-09-9/+117
| |\ \ \ \
| | * \ \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-6191/+11001
| | |\ \ \ \
| | * \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-06-06-33/+112
| | |\ \ \ \ \
generated by cgit v1.1 at 2024-12-11 10:13:26 +0000