summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfixMartin Krause2007-10-23-0/+4
|\
| * ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-15-0/+4
| | | | | | | | | | | | | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* | TQM860M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
| | | | | | | | | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | TQM866M: fix SDRAM refreshMartin Krause2007-10-15-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | At 133 MHz the current SDRAM refresh rate is too fast (measured 4 * 1.17 us). CFG_MAMR_PTA changes from 39 to 97. This result in a refresh rate of 4 * 7.8 us at the default clock 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. This is a compromise until a new method is found to adjust the refresh rate. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | TQM866M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
|/ | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* [FIX] XUPV2P change command handlingMichal Simek2007-10-14-19/+17
| | | | and remove code violation
* Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2007-10-13-12/+26
|\
| * Fix memtest breakageHaavard Skinnemoen2007-10-02-6/+2
| | | | | | | | | | | | | | | | CFG_MEMTEST_START uses weird magic involving gd, which fails to compile. Use hardcoded values instead (we actually know how much RAM we have on board.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * Merge commit 'origin/master'Haavard Skinnemoen2007-10-02-781/+5070
| |\
| * | Update atstk1002 bootargs.Eirik Aanonsen2007-09-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates to atstk1002 U-Boot header file: - Changed bootargs: * Set the bootargs for at1002 to point to the SD-card partition instead * ... of the boot flash. * Removing the rootfstype since that argument are not needed. Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Add some comments to clocks in atstk1002.hEirik Aanonsen2007-09-18-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | This patch applies some clarifying comments to how the different clocks are setup according to atstk1002.h Some of the previous comments where stating wrongful information. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Reduce BOOTDELAY variable to 1 second by default for STK1002Hans-Christian Egtvedt2007-08-30-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Remove double quotation marks around MAC address for STK1002Hans-Christian Egtvedt2007-08-30-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | Merge branch 'merge' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk2007-10-13-38/+37
|\ \ \
| * | | [FIX] change command handling and removing code violationMichal Simek2007-09-24-26/+24
| | | |
| * | | [FIX] change sets of commandsMichal Simek2007-09-24-10/+8
| | | | | | | | | | | | | | | | | | | | because changing of command handling brings compilation problems
| * | | [FIX] Email reparation & CopyrightMichal Simek2007-09-24-3/+3
| | | | | | | | | | | | | | | | | | | | Both codes are written by myself without any support from CTU
| * | | [PATCH] Change macro name for UartLiteMichal Simek2007-09-24-0/+3
| | | | | | | | | | | | | | | | because PowerPC 405 can use UartLite as console
| * | | synchronizition with mainlineMichal Simek2007-09-24-73/+58
| | | |
| * | | Merge ../u-bootMichal Simek2007-09-24-65/+170
| |\ \ \
| * | | | [FIX] Microblaze ML401 - repare FLASH handlingMichal Simek2007-09-11-10/+16
| | | | |
| * | | | Merge git://www.denx.de/git/u-bootMichal Simek2007-09-11-530/+2271
| |\ \ \ \
| * \ \ \ \ Merge git://www.denx.de/git/u-boot into mergeMichal Simek2007-08-15-278/+3991
| |\ \ \ \ \
| * | | | | | [FIX] Correction command setting for Microblaze boardsMichal Simek2007-08-15-33/+13
| | | | | | |
| * | | | | | Merge git://www.denx.de/git/u-bootMichal Simek2007-08-07-5988/+9124
| |\ \ \ \ \ \
| * | | | | | | [FIX] Coding style cleanupMichal Simek2007-08-05-5/+5
| | | | | | | |
| * | | | | | | Merge git://www.denx.de/git/u-bootMichal Simek2007-08-05-0/+411
| |\ \ \ \ \ \ \
| * | | | | | | | [FIX] Xilinx Uartlite driverMichal Simek2007-08-05-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because PPC405 can use UARTLITE serial interface and Microblaze can use Uart16550 serial interface not only Uartlite.
| * | | | | | | | [FIX] Change configuration for XUPV2P Microblaze boardMichal Simek2007-08-05-6/+51
| | | | | | | | |
| * | | | | | | | [FIX] support for simply measuring timeMichal Simek2007-07-14-0/+2
| | | | | | | | |
* | | | | | | | | Coding Style cleanup.Wolfgang Denk2007-10-13-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | GP3 SSA: enable RTCWolfgang Denk2007-10-12-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | Merge branch 'master' of /.automount/castor-vlab/root/home/wd/git/u-boot/master/Wolfgang Denk2007-10-10-1/+1
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | tqm5200: Fix CONFIG_CMD_PCI typo in board config file.Marian Balakowicz2007-10-05-1/+1
| | |_|_|_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* | | | | | | | | Merge branch 'hellrosa_i2c' of /home/gjb/git/u-bootWolfgang Denk2007-10-10-0/+9
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | [ads5121] EEPROM support added.Grzegorz Bernacki2007-10-09-0/+9
| |/ / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | | | | | | | | Merge branch 'tqm5200_default_env' of /home/tur/git/u-bootWolfgang Denk2007-10-10-16/+23
|\ \ \ \ \ \ \ \ \ | |/ / / / / / / / |/| | | | | | | |
| * | | | | | | | tqm5200: Restore customary env. variable boot commands for powerpc kernelsBartlomiej Sieka2007-09-13-16/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - update default definitions of kernel_addr and fdt_addr env. variables - make arch/powerpc booting the default scenario - update MTD partition layout to match the above Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
* | | | | | | | | ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yetStefan Roese2007-10-02-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | Merge branch 'master' of /home/stefan/git/u-boot/lwmon5Stefan Roese2007-09-27-4/+5
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | ppc4xx: Change lwmon5 default environment to support Linux RTCStefan Roese2007-08-29-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux PCF8563 RTC driver doesn't do autoprobing, so we need to supply the RTC I2C address as bootline parameter. This patch adds support for this rtc probing parameter to the bootargs: "rtc-pcf8563.probe=0,0x51" Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | | ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)Stefan Roese2007-09-27-1/+1
| |_|_|_|_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | | Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_configGrant Likely2007-09-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded nulls in a string differently. For example, the following statement: echo "this is a string\0" > afile Will produce the following with /bin/bash: "this is a string\0" But with /bin/dash, will produce: "this is a string Bug fixed by moving the embedded null out of the makefile and into the config header. Also renamed the macro to avoid usage colision with the same macro used by other board ports. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | | | | | | | TQM8xx[LM]: Fix broken environment alignment.Wolfgang Denk2007-09-16-5/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent toolchains, the environment sectors were no longer aligned to sector boundaries. The reason was a combination of two bugs: 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined for all TQM8xxL and TQM8xxM boards. But "include/common.h", where this gets defined, is not included here (and cannot be included without causing lots of problems). Added a new #define CFG_USE_PPCENV for all boards which really want to put the environment is a ".ppcenv" section. 2) The linker scripts just include environment.o, silently assuming that the objects in that file are really in the order in which they are coded in the C file, i. e. "environment" first, then "redundand_environment", and "env_size" last. However, current toolchains (GCC-4.x) reorder the objects, causing the environment data not to start on a flash sector boundary: Instead of: we got: 40008000 T environment 40008000 T env_size 4000c000 T redundand_environment 40008004 T redundand_environment 40010000 T env_size 4000c004 T environment Note: this patch fixes just the first part, and cures the alignment problem by making sure that "env_size" gets placed correctly. However, we still have a potential issue because primary and redundant environment sectors are actually swapped, i. e. we have now: 40008000 T redundand_environment 4000c000 T environment 40010000 T env_size This shall be fixed in the next version. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernelsWolfgang Denk2007-09-16-50/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | | NAND: Add CFG_NAND_QUIET optionMatthias Fuchs2007-09-15-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This config option sets the default for the progress information output behavior that can also be configured through the 'quiet' environment variable. The legacy NAND code does not print the current progress info on the console. So this option is for backward compatibility for units that are in the field and where setting the quiet variable is not an option. With CFG_NAND_QUIET set to '1' the console progress info is turned off. This can still be overwritten through the environment variable. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* | | | | | | | | Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as globalWolfgang Denk2007-09-15-2/+1
| |/ / / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | | [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot toGrzegorz Bernacki2007-09-11-1/+1
| |_|_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scan on second pci bus. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | | | | | | Fix compile error in spc1920 config.Wolfgang Denk2007-09-09-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Markus Klotzbücher <mk@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | | [PPC440SPe] PCIe environment settings for Katmai and YuccaGrzegorz Bernacki2007-09-07-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - 'pciconfighost' is set by default in order to be able to scan bridges behind the primary host/PCIe - 'pciscandelay' env variable is recognized to allow for user-controlled delay before the PCIe bus enumeration; some peripheral devices require a significant delay before they can be scanned (e.g. LSI8408E); without the delay they are not detected Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
generated by cgit v1.1 at 2024-12-22 16:53:14 +0000