summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* ENGR00119246 Add CONFIG_MXC_NAND config flag in MX25 platformJason2009-12-11-0/+1
| | | | | | Add CONFIG_MXC_NAND config flag in MX25 platform Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00119224: mmu support for mx51 3stack and mx51 bbgTerry Lv2009-12-11-0/+12
| | | | | | mmu support for mx51 3stack and mx51 bbg. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119171: ubifs support for android recovery mode.Terry Lv2009-12-11-6/+16
| | | | | | ubifs support for android recovery mode. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118789 Uboot:Update NAND scan scheme to support new nand typeJason2009-12-08-2/+2
| | | | | | | | Update NAND scan scheme to support new nand type. With this patch uboot can support new NAND flash on mx25/mx35 board while compatible with old NAND on old boards. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118978: Timer adjustment for all platformsFred Fan2009-12-04-16/+22
| | | | | | | | | In current u-boot design, get_timer_masked is not correct and udelay is not accurate when the time is less than 1000us. Thus we need to use ipg clock source for accurate timer. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118579 Enable MMUrel_imx_2.6.31_09.12.00_RC1Fred Fan2009-11-30-0/+2
| | | | | | | To enable MMU, it is porting from redboot. Enable MMU and enable I/D cache. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00118576 MX25: Support Smc911x ethernetSammy He2009-11-20-14/+25
| | | | | | | 1. Add imx cspi support for cpld access. 2. Add smc911x ethernet support from cpld. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118362: Correct recovery NAND cmdTerry Lv2009-11-12-29/+20
| | | | | | | | | This patch will fix three issues: 1. Add boot device detection. 2. Use right nand command in anroid for recovery mode. 3. Recovery mode code clean. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118294: Misc changes for v2009.08 upgrade.Terry Lv2009-11-11-32/+27
| | | | | | Misc changes for v2009.08 upgrade. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00117616: PATA support in u-boot.Terry Lv2009-11-04-0/+14
| | | | | | PATA support in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116924 Uboot: Boot up hang at detecting NAND when cold bootJason2009-11-04-0/+1
| | | | | | | | | | Boot from MMC card failed at detecting NAND. The fix will 1. Set RBB_MODE to 1 and using atomic status command 2. Set FW correctly by adding CONFIG_NAND_FW_8 config 3. Correct the BLS register value Signed-off-by:Jason Liu <r64343@freescale.com> (cherry picked from commit 7142651386271c340a6ae061a6e2893695675724)
* u-boot v2009.08 sd/mmc support.Terry Lv2009-11-03-140/+187
| | | | Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116472-1 U-BOOT upgrade to V2009.08Fred Fan2009-09-14-28/+6
| | | | | | | | | | U-BOOT upgrade from V2009.01 to V2009.08 Initial version for i.MX51 BBG board. Support: FEC, SPI, spi Nor Flash Boot from spi nor flash and mmc/sd Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00116243: I2C support for mx51 3ds board.Terry Lv2009-09-10-19/+25
| | | | | | I2C support for mx51 3ds board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116203: Change nand Makefile to use CONFIG_MXC_NAND.Terry Lv2009-09-10-3/+7
| | | | | | Change nand Makefile to use CONFIG_MXC_NAND. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-11/+622
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115046: Add new MMC config option for mx35.Terry Lv2009-09-10-26/+254
| | | | | | Add new MMC config option for mx35. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-0/+151
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00114746: Disable flash header for mx35 nand bootTerry Lv2009-09-10-4/+7
| | | | | | Disable flash header for mx35 nand boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114393: Support Atmel AT45DB321D SPI NOR flash.Terry Lv2009-09-10-1/+1
| | | | | | Support Atmel AT45DB321D SPI NOR flash. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114178 Support MMC/SD boot and enable dhcp in uboot on MX25Sammy2009-09-10-2/+36
| | | | | | | | 1. Support MMC/SD boot in uboot, however, it is disabled default and user needs to enable manually by changing mx25_3stack.h; 2. Enable dhcp for network. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00114201: Add MMC configs to mx35 3stack config file.Terry Lv2009-09-10-1/+35
| | | | | | Add MMC configs to mx35 3stack config file. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113611: Add FEC support for BBG2.Terry Lv2009-09-10-6/+29
| | | | | | Add FEC support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113475: Add auto-complete and platform prompt for each platform.Terry Lv2009-09-10-4/+8
| | | | | | Add auto-complete and platform prompt for each platform. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113439: BBG2, enable SPI NOR and MMC in one image.Terry Lv2009-09-10-10/+6
| | | | | | BBG2, enable SPI NOR and MMC in one image. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113148 Add build option to uboot for different media typeJason2009-09-10-8/+6
| | | | | | | 1. Add build option to uboot for different media type 2. fix the spi-nor link error Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00112845 spi nor boot and pmic support for BBG2.Terry Lv2009-09-10-2/+25
| | | | | | spi nor boot support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112298 BBG2: Basic boot.r653882009-09-10-0/+221
| | | | | | Basic boot on BBG2 board. Signed-off-by: r65388 <r65388@freescale.com>
* ENGR00109851 Add nand driver for MX51 ubootJason2009-09-10-7/+7
| | | | | | Add nand driver for MX51 uboot Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00107840 Add U-Boot for MX25 PDK boardAlan Carvalho de Assis2009-09-10-0/+200
| | | | | | | These patches add functional support to iMX25PDK. Currently only the internal FEC is supported. Signed-off-by: Alan Carvalho de Assis <alan.assis@freescale.com>
* ENGR00108473 Porting i.MX51 3stack TO2 support to V2009.01Fred Fan2009-09-10-0/+191
| | | | | | | Support i.MX51 TO2.0 3stack board. And enable LAN9217 support. NAND is not supported in this patch. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00107886 Porting MX31, MX35 3stack to u-boot V2009.01Fred Fan2009-09-10-28/+26
| | | | | | Modify and Verfiy MX31 & MX35 3stack according to the changes in V2009.01 Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00103914 Support i.MX35 TO2 and 3stack board version 2Fred Fan2009-09-09-0/+1
| | | | | | | | | 1. Check Soc version 2. Check Board version based on TO2 pmic chip version. 3. Based on soc version, skips To1 workaround code 4. based on board version, enables FEC power and select pin mux. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00102788 Remove CONFIG_NAND_BOOT on i.MX31 3stackFred Fan2009-09-09-1/+0
| | | | | | | | | 1. Change NAND driver Makefile to bulild individual nand driver on i.MX31 and i.MX35. 2. Remove CONFIG_NAND_BOOT to common boot code which supports boot from nand and nor. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00099697 Add nand driver for mx35Fred Fan2009-09-09-1/+10
| | | | | | Add nand driver for mx35 Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00094619 Support i.MX31 3stack boardFred Fan2009-09-09-0/+165
| | | | | | | | Support boot from NAND Flash Add driver for i.MX31 NFC Upgate U-Boot to support NAND boot Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00081147 Support i.MX35 3stack boardFred Fan2009-09-09-0/+218
| | | | | | | | Support boot from NOR flash Support Multiple ethernet:LAN9217 and FEC Support upgrade u-boot Signed-off-by: Fred Fan <r01011@freescale.com>
* Use common code for Matrix Vision boardsAndré Schwarz2009-08-28-30/+21
| | | | | | | Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by using common code. Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
* mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelayKim Phillips2009-08-26-3/+3
| | | | | | | | | | apparently the ITX was missed last round. Also make bootdelay consistent with other boards, so as to give on the opportunity to fix mistakenly set bootcmd without having checked for an bootdelay zero setting first. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: match dtb filename references to their dts equivalents in the linux ↵Kim Phillips2009-08-26-2/+2
| | | | | | kernel Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Blackfin: cm-bf527/cm-bf537: increase flash sectorsHarald Krapfenbauer2009-08-23-2/+2
| | | | | | | | Newer revisions of these boards have slightly larger flashes, so increase the configured number of sectors so that U-Boot works on all revisions. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-08-22-36/+37
|\
| * mpc83xx: accommodate larger kernel sizes by defaultKim Phillips2009-08-21-20/+20
| | | | | | | | | | | | | | linux mpc83xx_defconfig kernels are getting bigger, accommodate for their growth by adjusting default load and fdt addresses. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: mpc8377erdb - change DDR settings to those from latest bspKim Phillips2009-08-21-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot at either: NET: Registered protocol family 16 or the io scheduler cfq registered message. Fixing up these DDR settings appears to fix the problem. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: tqm8349 - remove pci & flash window conflictKim Phillips2009-08-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit 9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on tqm834x to make it more consistent with the other 83xx boards. During that time however, the author failed to realize that FLASH_BASE was occupying the same range as what PCI1_MEM_BASE was being assigned. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Wolfgang Denk <wd@denx.de>
| * mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMPPaul Gortmaker2009-08-21-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was introduced with the MPC8349EMDS board, and then copied to a couple other boards by nature of being the reference implementation. u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 u-boot$ It currently isn't used, so delete it before it spreads further. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: sbc8349 - make enabling PCI more user friendlyPaul Gortmaker2009-08-21-9/+13
| | | | | | | | | | | | | | | | | | | | Prior to this commit, to enable PCI, you had to go manually edit the board config header, which isn't really user friendly. This adds the typical PCI make targets to the toplevel Makefile in accordance with what is being done with other boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | arm: rd6281a: Fixed NAND specific warningPrafulla Wadaskar2009-08-21-0/+1
|/ | | | | | | It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF for NAND specific warning removal, same is done in this patch Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-08-18-0/+4
|\
| * ppc4xx: Fix "chip_config" command for AMCC ArchesStefan Roese2009-08-18-0/+4
| | | | | | | | | | | | | | | | | | | | This patch fixes the "chip_config" command for I2C bootstrap EEPROM configuration. First it changes the I2C bootstrap EEPROM address to 0x54 as this is used on Arches (instead of 0x52 on Canyonlands/ Glacier). Additionally, the NAND bootstrap settings are removed for Arches since Arches doesn't support NAND-booting. Signed-off-by: Stefan Roese <sr@denx.de>