summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SXFabio Estevam2015-06-08-8/+16
| | | | | | | | | | | | | | | | Commit 8183058188cd2d942 ("imx6: centralise common boot options in mx6_common.h") broke boot on mx6sl and mx6sx by assuming that all mx6 SoCs use the same LOADADDR/SYS_TEXT_BASE range, which is not correct. DDR on mx6sx/mx6sl starts at 0x80000000. Adjust LOADADDR/SYS_TEXT_BASE to the proper values for mx6sx/mx6sl, so that these SoCs can boot again. Also, TQMA6 requires a custom CONFIG_SYS_TEXT_BASE value, so move its setting prior to the inclusion of mx6_common.h. Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
* wandboard: Add board revision detection supportFabio Estevam2015-06-08-2/+6
| | | | | | | | | | | | | There are two revisions of wandboard: version B1 and C1. Add the revision detection support, so that the correct dtb file can be automatically loaded. Based on the patch from Richard Hu <hakahu@gmail.com>. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-By: Vagrant Cascadian <vagrant@aikidev.net>
* arm: mx6: tqma6: use default CONFIG_SYS_PBSIZEMarkus Niebel2015-06-01-4/+0
| | | | | | | | | this removes a config entry and uses the default value defined in config_fallbacks.h. This implements the same behaviour as a patch series for other i.MX6 boards from Freescale Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
* arm: mx6: tqma6: fix spelling error in conditionMarkus Niebel2015-06-01-2/+2
| | | | Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
* warp: Add fuse command supportFabio Estevam2015-05-28-0/+4
| | | | | | Select the fuse command support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* warp: Enable CONFIG_SUPPORT_EMMC_BOOTFabio Estevam2015-05-28-0/+1
| | | | | | | CONFIG_SUPPORT_EMMC_BOOT is important to enable the boot partition via 'mmc partconf 0 1 1 0' command, for example. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* warp: Fix CONFIG_SYS_FSL_ESDHC_ADDRFabio Estevam2015-05-28-1/+1
| | | | | | | Warp uses eMMC connected to esdhc2 port, so fix CONFIG_SYS_FSL_ESDHC_ADDR to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZEFabio Estevam2015-05-28-1/+1
| | | | | | | | | Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE in order to avoid the following error when running the dfu command: => dfu 0 mmc 0 dfu_get_buf: Could not memalign 0x2000000 bytes Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-05-26-1459/+473
|\
| * mx6: standardise CONFIG_CMD_CACHEPeter Robinson2015-05-26-69/+4
| | | | | | | | | | | | | | Move CONFIG_CMD_CACHE to mx6_common and standardise the way it's defined. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
| * imx6: generic MMC config options to mx6_commonPeter Robinson2015-05-26-144/+9
| | | | | | | | | | | | | | Move all standard mx6 MMC configs to mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
| * imx6: standardise filesystem and boot optionsPeter Robinson2015-05-26-142/+13
| | | | | | | | | | | | Move all standard filesystem, partition and fdt options to mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * imx6: move generic miscellaneous and overwrite optionsPeter Robinson2015-05-26-286/+16
| | | | | | | | | | | | | | Move generic miscellaneous options that are standard across most, if not all, mx6 boards to central mx6_common define to ensure consistent features. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * imx6: centralise common boot options in mx6_common.hPeter Robinson2015-05-26-124/+10
| | | | | | | | | | | | | | Define common LOADADDR and BOOTDELAY to ensure a consistent experience across mx6 boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * imx6: move MXC_GPIO define to mx6_common.hPeter Robinson2015-05-26-33/+4
| | | | | | | | | | | | Define CONFIG_MXC_GPIO and CONFIG_CMD_GPIO by default in mx6_common Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * imx6: move standard ATAG configs to mx6_common.hPeter Robinson2015-05-26-96/+7
| | | | | | | | | | | | | | Define the standard ATAG consfigs in mx6_common. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
| * imx6: move generic imx6 options to mx6_common.hPeter Robinson2015-05-26-116/+8
| | | | | | | | | | | | | | | | All boards define CONFIG_MX6, CONFIG_DISPLAY_BOARDINFO, CONFIG_DISPLAY_CPUINFO and CONFIG_SYS_GENERIC_BOARD so define them in mx6_common Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
| * imx6: move all standard includes to mx6_common.hPeter Robinson2015-05-26-177/+19
| | | | | | | | | | | | | | | | | | | | | | The linux/sizes.h, asm/arch/imx-regs.h, asm/imx-common/gpio.h, config_cmd_default.h includes are used fairly universally across imx6 boards so include them in mx6_common.h by default. We define CONFIG_SYS_NO_FLASH before config_cmd_default.h so that we don't have to undef CONFIG_CMD_FLASH / CONFIG_CMD_IMLS everywhere. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
| * novena: standardise mx6_common.h includePeter Robinson2015-05-26-1/+1
| | | | | | | | | | | | | | Standardise mx6_common.h to the same as other mx6 boards Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini at konsulko.com>
| * imx: ventana: update MMC env configurationTim Harvey2015-05-26-2/+3
| | | | | | | | | | | | We will use the same env size and redundancy used for NAND env for MMC. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * arm, imx6: add support for aristainetos2 boardHeiko Schocher2015-05-26-308/+395
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for imx6dl based aristainetos2 board U-Boot 2015.04-rc5-00066-g60f6ed4 (Apr 10 2015 - 08:46:27) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: WDOG Board: aristaitenos2 Watchdog enabled I2C: ready DRAM: 1 GiB NAND: 1024 MiB MMC: FSL_SDHC: 0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lg4573 (480x800) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 => Signed-off-by: Heiko Schocher <hs@denx.de>
| * imx: ventana: config: enable Falcon modeTim Harvey2015-05-21-0/+16
| | | | | | | | | | | | Falcon mode entails the SPL booting the OS directly instead of U-Boot. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * wandboard: Switch to SPL supportFabio Estevam2015-05-21-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the wandboard variants: quad, dual-lite and solo. By switching to SPL we can support all these variants with a single binary, which is very convenient. Based on the work from Richard Hu. Tested kernel booting on the three boards. Signed-off-by: Richard Hu <hakahu@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Vagrant Cascadian <vagrant@aikidev.net> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: riotboard, marsboard: Enable thermal supportNikolay Dimitrov2015-05-19-0/+1
| | | | | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
| * imx: ventana: add pmic_setup to SPLTim Harvey2015-05-19-0/+1
| | | | | | | | | | | | | | We need to do any PMIC setup in the SPL if we are to bypass U-Boot for falcon mode. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: (cosmetic) clean up size defines for improved readabilityTim Harvey2015-05-19-10/+12
| | | | | | | | | | | | Use the SZ_1M and SZ_1K macros from linuz/sizes.h for improved readability Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: use MMC SPL RAW supportTim Harvey2015-05-19-4/+0
| | | | | | | | | | | | Switch to MMC RAW support for SPL. We will place the uboot.img at 69KB. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-05-26-0/+5
|\ \
| * | zynq: Use system timer implementation instead of ourMichal Simek2015-05-25-0/+5
| | | | | | | | | | | | | | | | | | | | | Don't use error-prone arch timer code and instead use system timer implementation to simplify our code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge git://git.denx.de/u-boot-nand-flashTom Rini2015-05-24-5/+2
|\ \ \ | |/ / |/| |
| * | mtd: vf610_nfc: enable ONFI detectionStefan Agner2015-05-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes enable ONFI detection. The Read ID command now allows one address byte which is needed for ONFI detection. To read the ONFI parameter page, the NAND_CMD_PARAM need to be supported. The CMD code enables one command and one address byte along with reading data from flash using R/B#, as specified by ONFI. Signed-off-by: Stefan Agner <stefan@agner.ch>
| * | mtd: vf610_nfc: add Freescale NFC controller configs to KconfigStefan Agner2015-05-24-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allows users to enable/disable the Freescale NFC controller found in systems like Vybrid (VF610), MPC5125, MCF54418 or Kinetis K70 via Kconfig with more detailed help docs. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefano Babic <sbabic@denx.de> [scottwood: updated vf610twr_nand_defconfig] Signed-off-by: Scott Wood <scottwood@freescale.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-05-22-2/+25
|\ \ \
| * | | arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.hYork Sun2015-05-20-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ccsr_ddr structure is already defined in fsl_immap.h. Remove this duplicated define. Move fixed timing into ls1021atwr.h. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com>
| * | | arm: ls102xa: Adjust the load address of U-Boot for NOR bootAlison Wang2015-05-20-2/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original load address of U-Boot is 0x67f80000. The address space of NOR flash is 0x60000000 to 0x67ffffff. It will cause the size of u-boot couldn't be larger than 512K. As more features are supported in u-boot, the size of u-boot is larger than 512K. To fix this issue, the load address of U-Boot for NOR boot is adjusted to 0x60100000. In RCW, the PBI command needs to change as follows: .pbi -write 0xee0200, 0x67f80000 +write 0xee0200, 0x60100000 .end Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | sandbox: Enable some ENV commandsJoe Hershberger2015-05-21-0/+5
| |/ |/| | | | | | | | | | | | | Enable some additional ENV commands in sandbox to aid in build testing and run testing. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-netTom Rini2015-05-20-253/+7
|\ \
| * | net: Remove all calls to net_random_ethaddr()Joe Hershberger2015-05-20-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the calls to net_random_ethaddr() that some boards and some drivers are calling. This is now implemented inside of net/eth.c Enable the feature for all boards that previously enabled it. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part) Series-changes: 2 -Fixed bfin build errors
| * | net: Remove all references to CONFIG_ETHADDR and friendsJoe Hershberger2015-05-19-247/+7
| |/ | | | | | | | | | | | | | | | | | | We really don't want boards defining fixed MAC addresses in their config so we just remove the option to set it in a fixed way. If you must have a MAC address that was not provisioned, then use the random MAC address functionality. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | sunxi: Cache line size definitionPaul Kocialkowski2015-05-19-0/+3
| | | | | | | | | | | | | | | | | | | | | | Sunxi platforms use ARM Cortex A8, A7 and A15 (unsupported yet) CPU cores, which all have 64 bytes cache line size. This is required to e.g. enable USB gadget. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: add support for UART2 on A23/A33Laurent Itti2015-05-19-0/+2
| | | | | | | | | | | | | | | | | | | | Add support for UART2 (2-pin version but note that RTS/CTS pins are available pn that port for possible future use), can be selected in config by using CONFIG_CONS_INDEX=3 Signed-off-by: Laurent Itti <laurentitti@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | console: Fix pre-console flushing via cfb_console being very slowHans de Goede2015-05-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On my A10 OlinuxIno Lime I noticed a huge (5+ seconds) delay coming from console_init_r. This turns out to be caused by the preconsole buffer flushing to the cfb_console. The Lime only has a 16 bit memory bus and that is already heavy used to scan out the 1920x1080 framebuffer. The problem is that print_pre_console_buffer() was printing the buffer once character at a time and the cfb_console code then ends up doing a cache-flush for touched display lines for each character. This commit fixes this by first building a 0 terminated buffer and then printing it in one puts() call, avoiding unnecessary cache flushes. This changes the time for the flush from 5+ seconds to not noticable. The downside of this approach is that the pre-console buffer needs to fit on the stack, this is not that much to ask since we are talking about plain text here. This commit also adjusts the sunxi CONFIG_PRE_CON_BUF_SZ to actually fit on the stack. Sunxi currently is the only user of the pre-console code so no other boards need to be adjusted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | sunxi: Pass serial number through ATAGPaul Kocialkowski2015-05-19-0/+1
|/ | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* imx: ventana: config: enable Thermal supportTim Harvey2015-05-15-0/+4
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: enable DM_SERIALTim Harvey2015-05-15-0/+1
| | | | | | mxc_serial supports DM so lets use it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable driver modelTim Harvey2015-05-15-0/+7
| | | | | | Enable U-Boot Driver Model (DM). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: config: enable gpio commandTim Harvey2015-05-15-0/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: display SPL boot deviceTim Harvey2015-05-15-0/+1
| | | | | | Display what device the SPL will fetch uboot.img from Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: set dtype env var to boot mediaTim Harvey2015-05-15-4/+4
| | | | | | | Bootscripts for some distro's such as Android can benefit from knowing what boot media its script was loaded from. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* tbs2910: add CONFIG_SUPPORT_EMMC_BOOTSoeren Moch2015-05-15-0/+1
| | | | | | Add emmc boot partition commands to be able to select the boot partition. Signed-off-by: Soeren Moch <smoch@web.de>
generated by cgit v1.1 at 2024-09-19 07:49:08 +0000