summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* ARM: uniphier: make update commands more flexible for ATFMasahiro Yamada2017-01-29-6/+18
| | | | | | | | | | | | Currently, SPL (u-boot-spl.bin) and U-Boot (u-boot.bin) are stored in non-volatile devices, and some environments are defined to update the images easily. When ARM Trusted Firmware is fully used, SPL is not used. U-Boot proper is contained as BL33 into FIP (Firmware Image Package), which is standard container used by ATF. Allow to use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KBMasahiro Yamada2017-01-29-7/+13
| | | | | | | | | | | | | | | | | | | | | | The Boot ROM supports authentication feature to prevent malformed software from being run on products. The signature is added at the tail of the second stage loader (= SPL in U-boot terminology). The size of the second stage loader was 64KB, and it was consistent across SoCs. The situation changed when LD20 SoC appeared; it loads 80KB second stage loader, and it is the only exception. Currently, CONFIG_SPL_PAD_TO is set to 64KB and U-Boot proper is loaded from the 64KB offset of non-volatile devices. This means the signature of LD20 SoC (located at 80KB offset) corrupts the U-Boot proper image. Let's move the U-Boot proper image to 128KB offset. It uses 48KB for nothing but padding, and we could actually locate the U-Boot proper at 80KB offset. However, the power of 2 generally seems a better choice for the offset address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: change the offset to environment storage areaMasahiro Yamada2017-01-29-1/+1
| | | | | | | | When ARM Trusted Firmware is used, bl1.bin + fip.bin exceeds 512KB, so the boot image and the current environment area will overlap. Move the environment storage to 1MB offset. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: set initrd_high environment to skip initrd relocationMasahiro Yamada2017-01-29-2/+7
| | | | | | | | | | | | The boot_ramdisk_high() checks the environment "initrd_high" and, if it is set to (ulong)-1, skip the initrd relocation. This is useful for faster booting when we know the initrd is already located within the reach of the kernel. Change "norboot" to copy images in order to make it work without depending on the automatic relocation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: use Image.gz instead Image for booting ARM64 LinuxMasahiro Yamada2017-01-29-14/+22
| | | | | | | | | | | | The ARM64 Linux raw image now amounts to 15MB and it is getting bigger and bigger. Using Image.gz saves about 8MB. The cost of unzip is smaller than what we get by saving the kernel loading from non-volatile devices. The ARM32 Linux still uses zImage, a self-decompressor image, so it should not be affected. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: collect SPL CONFIG symbols to the bottom of headerMasahiro Yamada2017-01-29-6/+5
| | | | | | | | For clarification, move CONFIG symbols that affect SPL building into a single place. Drop #ifdef CONFIG_SPL ... #endif since it is harmless to define CONFIG_SPL_... during U-Boot proper building. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: detect RAM size by decoding HW register instead of DTMasahiro Yamada2017-01-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot needs to set up available memory area(s) in dram_init() and dram_init_banksize(). It is platform-dependent how to detect the memory banks. Currently, UniPhier adopts the memory banks _alleged_ by DT. This is based on the assumption that users bind a correct DT in their build process. Come to think of it, the DRAM controller has already been set up before U-Boot is entered (because U-Boot runs on DRAM). So, the DRAM controller setup register seems a more reliable source of any information about DRAM stuff. The DRAM banks are initialized by preliminary firmware (SPL, ARM Trusted Firmware BL2, or whatever), so this means the source of the reliability is shifted from Device Tree to such early-stage firmware. However, if the DRAM controller is wrongly configured, the system will crash. If your system is running, the DRAM setup register is very likely to provide the correct DRAM mapping. Decode the SG_MEMCONF register to get the available DRAM banks. The dram_init() and dram_init_banksize() need similar decoding. It would be nice if dram_init_banksize() could reuse the outcome of dram_init(), but global variables are unavailable at this stage because the .bss section is available only after the relocation. As a result, SG_MEMCONF must be checked twice, but a new helper uniphier_memconf_decode() will help to avoid code duplication. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: stm32: enable support for smsc phy on stm32f746-disco boardMichael Kurz2017-01-28-0/+1
| | | | | | | | | | | This patch enables support for the smsc phy on the stm32f746-disco board. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA <vikas.manocha@st.com> Series-changes 3: - Add Acked-by tag to 'enable support for smsc phy on...'
* net: stm32: add designware mac glue code for stm32Michael Kurz2017-01-28-2/+7
| | | | | | | | This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* board/chiliboard: Add support for chiliBoardMarcin Niestroj2017-01-28-0/+214
| | | | | | | | | | | | | chiliBoard is a development board which uses chiliSOM as its base. Hardware specification: * chiliSOM (TI AM335x, DRAM, NAND) * Ethernet PHY (id 0) * USB host (usb1) * MicroSD slot (mmc0) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* aspeed: Support for ast2500 Eval Boardmaxims@google.com2017-01-28-0/+27
| | | | | ast2500 Eval Board device tree and board specific configuration. Reviewed-by: Simon Glass <sjg@chromium.org>
* aspeed: Board init functions and common configs for ast2500 based boardsmaxims@google.com2017-01-28-0/+81
| | | | | | | | Add configuration file with parameters that are very likely to be shared by all ast2500-based boards. Add ast2500-board.c file with the init code that is very likely to be shared by all ast2500-based boards. Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Note vendor-required status of certain MACH_TYPE valuesTom Rini2017-01-28-24/+11
| | | | | | | | | | | | | | In the cases of some boards, a MACH_TYPE number is used which is either not registered upstream or worse (for functionality) is re-using the number of a different (or reference) platform instead. Make sure we have a comment in these cases. Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Cc: Walter Schweizer <swwa@users.sourceforge.net> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de>
* am335x_shc: Drop MACH_TYPE usageTom Rini2017-01-28-19/+0
| | | | | | | | This board is using MACH_TYPE values that were clearly picked during development and not registered. Remove rather than support. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Clean up MACH_TYPE_xxx usage after re-sync of mach-typesTom Rini2017-01-28-100/+9
| | | | | | | | With the latest mach-types values we have many instances where we no longer need to define a value and a few cases where the name (but not value) have changed slightly. Signed-off-by: Tom Rini <trini@konsulko.com>
* Revert "arm: Remove unregister MACH_TYPE_xxx uses"Tom Rini2017-01-28-0/+33
| | | | | | | | | | This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae. This is not a strict revert as it is easier to fix board/atmark-techno/armadillo-800eva/armadillo-800eva.c to now the correct name (same value) than to revert that change too. Signed-off-by: Tom Rini <trini@konsulko.com>
* cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPTPatrick Delaunay2017-01-28-147/+0
| | | | | | | | | | | We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* disk: convert CONFIG_EFI_PARTITION to KconfigPatrick Delaunay2017-01-28-59/+0
| | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* disk: convert CONFIG_AMIGA_PARTITION to KconfigPatrick Delaunay2017-01-28-1/+0
| | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* disk: convert CONFIG_ISO_PARTITION to KconfigPatrick Delaunay2017-01-28-49/+0
| | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* disk: convert CONFIG_DOS_PARTITION to KconfigPatrick Delaunay2017-01-28-420/+0
| | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* disk: convert CONFIG_MAC_PARTITION to KconfigPatrick Delaunay2017-01-28-52/+0
| | | | | Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* Merge git://www.denx.de/git/u-boot-marvellTom Rini2017-01-26-0/+6
|\
| * arm64: mvebu: Enable SDHCI/MMC support for the db-88f7040/8040Stefan Roese2017-01-25-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the MMC support for the SDHCI controller on the Armada 7k db-88f7040 and the Armada 8k db-88f8040 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
| * arm64: mvebu: Enable SDHCI/MMC support for the db-88f3720Stefan Roese2017-01-25-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the MMC support for the SDHCI controller on the Armada 3700 db-88f3720 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
* | Convert CONFIG_ARCH_MISC_INIT to KconfigSimon Glass2017-01-25-32/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass2017-01-25-287/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
* | Convert CONFIG_ARCH_EARLY_INIT_R to KconfigSimon Glass2017-01-25-19/+0
|/ | | | | | | This converts the following to Kconfig: CONFIG_ARCH_EARLY_INIT_R Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: am57xx: cl-som-am57x: fix EthernetUri Mashiach2017-01-24-2/+2
| | | | | | | | | | | | | | | | | | | | The module is continuously rebooting with the following message: Net: data abort pc : [<fff77f42>] lr : [<fff6e32b>] reloc pc : [<80816f42>] lr : [<8080d32b>] sp : fdf5ce48 ip : fdf5d79c fp : 00000017 r10: 8083cd58 r9 : fdf5cef0 r8 : fdf5d5d0 r7 : 48485000 r6 : 400000ff r5 : fdf5d6e0 r4 : fdf5d618 r3 : fdf5d5b4 r2 : fdf5d5d0 r1 : 643a3631 r0 : fdf5d6e0 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... Modifications: * Enable Ethernet configuration in the SPL. * Update PINMUX of PHY enable GPIO. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* imx31_phycore: Split the eet variant out into a different TARGETTom Rini2017-01-24-1/+1
| | | | | | | Rename CONFIG_IMX31_PHYCORE_EET to CONFIG_TARGET_IMX31_PHYCORE_EET and make this a distinct config target. Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: uniphier: make SPL optional for ARVv8 SoCsMasahiro Yamada2017-01-22-2/+4
| | | | | | | | | | | | | | | | | | We may want to run different firmware before running U-Boot. For example, ARM Trusted Firmware runs before U-Boot, making U-Boot a non-secure world boot loader. In this case, the SoC might be initialized there, which enables us to skip SPL entirely. This commit removes "select SPL" to make it configurable. This also enables the Multi SoC support for the UniPhier ARMv8 SoCs. (CONFIG_ARCH_UNIPHIER_V8_MULTI) Thanks to the driver model and Device Tree, the U-Boot proper part is now written in a generic way. The board/SoC parameters reside in DT. The Multi SoC support increases the memory footprint a bit, but the U-Boot proper does not have strict memory constraint. This will mitigate the per-SoC (sometimes per-board) defconfig burden. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* status_led: Kconfig migrationUri Mashiach2017-01-21-216/+2
| | | | | | | | | | | | | Move all of the status LED feature to drivers/led/Kconfig. The LED status definitions were moved from the board configuration files to the defconfig files. TBD: Move all of the definitions in the include/status_led.h to the relevant board's defconfig files. Tested boards: CL-SOM-AM57x, CM-T335 Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
* config: Move CONFIG_BOARD_LATE_INIT to defconfigsJagan Teki2017-01-21-112/+0
| | | | | Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* mx6saberesd_spl: Correct falcon mode additionTom Rini2017-01-20-2/+2
| | | | | | | | | | | | When falcon mode support was added, it was right around when SPL_OS_BOOT was migrated to Kconfig. So first we must move the enablement to the defconfig file. Next, it turned off EXT support rather than add the information to allow for falcon mode from EXT. Add this information so that the board compiles after 5d28b930f237. Fixes: d96796ca23b2 ("mx6sabresd: Add Falcon mode support") Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* odroid-c2: Enable distro bootAndreas Färber2017-01-20-0/+16
| | | | | | | | | | | Use the generic "distro" boot framework to enable automatic DHCP boot. MMC and USB are not yet implemented, so this is the only boot option. The fdt and kernel addresses are adopted from downstream; ramdisk and scriptaddr addresses were chosen arbitrarily. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
* meson: misc_init_r is board-specificAndreas Färber2017-01-20-1/+2
| | | | | | | Move it from meson-gxbb-common.h to odroid-c2.h to allow new boards not to implement it. Signed-off-by: Andreas Färber <afaerber@suse.de>
* ARM: omap3_logic: Refactor Boot Environmental variablesAdam Ford2017-01-20-32/+42
| | | | | | | | | | Some scripts are calling the same functions, so these changes consolidate common scripts together to reduce redundancy and shrink size a bit. This also keeps the 'bootargs' variable from growing if manually called more than one time. This also adds NAND booting scripts based on newly consolidated scripts. Signed-off-by: Adam Ford <aford173@gmail.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-01-19-168/+115
|\
| * kconfig: fsl PPA: move CONFIG_* to KconfigHou Zhiqiang2017-01-18-14/+0
| | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * kconfig: armv8: move armv8 sec_firmware CONFIG_* to KconfigHou Zhiqiang2017-01-18-7/+0
| | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [York S: clean up scripts/config_whitelist.txt] Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1046ardb: Add support power initializationHou Zhiqiang2017-01-18-0/+6
| | | | | | | | | | | | | | | | | | Add the chip power supply voltage initialization on LS1046ARDB. Add function power_init_board(), and it will initialize the PMIC and call the chip power initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * LS2080A: Add validation of MC & DPC images.Udit Agarwal2017-01-18-3/+48
| | | | | | | | | | | | | | | | | | Add secure boot validation of MC, DPC images using esbc_validate command. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl-lsch3: consolidate the clock system initializationHou Zhiqiang2017-01-18-1/+1
| | | | | | | | | | | | | | | | This patch binds the sys_info->freq_systembus to Platform PLL, and implements the IPs' clock function individually. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl-lsch2: refactor the clock system initializationHou Zhiqiang2017-01-18-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now, there are 3 kind of SoCs under Layerscape Chassis 2, like LS1043A, LS1046A and LS1012A. But the clocks tree has a lot of differences, for instance, the IP modules have different dividers to derive its clock from Platform PLL. And the core cluster PLL and platform PLL maybe have different reference clocks, such as LS1012A. Another problem is which clock/PLL should be described by sys_info->freq_systembus, it is confused in Layerscape Chissis 2. This patch is to bind the sys_info->freq_systembus to the Platform PLL, and handle the different divider of IP modules separately between different SoCs, and separate reference clocks of core cluster PLL and platform PLL. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoCPrabhakar Kushwaha2017-01-18-0/+44
| | | | | | | | | | | | | | | | | | | | Enable UUID and GPT partition support for NXP's ARM based SoCs i.e. LS1012A, LS1021A, LS1043A, LS1046A and LS2080A. Also enable DOS partition for LS1012AFRDM boards. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * kconfig: move FSL_PCIE_COMPAT to platform KconfigHou Zhiqiang2017-01-18-8/+0
| | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Enable PCIe in defconfigsMinghuan Lian2017-01-18-24/+0
| | | | | | | | | | | | | | | | | | The patch enables PCIe in ls2080a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043a: Enable PCIe and E1000 in defconfigsMinghuan Lian2017-01-18-17/+0
| | | | | | | | | | | | | | | | | | The patch enables PCIe and E1000 in ls1043a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1012a: Enable PCIe and E1000 in defconfigsMinghuan Lian2017-01-18-32/+0
| | | | | | | | | | | | | | | | | | The patch enables PCIe and E1000 in ls1012a defconfigs and removes unused PCIe related macro defines Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021a: Enable PCIe in defconfigsMinghuan Lian2017-01-18-51/+0
| | | | | | | | | | | | | | | | | | The patch enables PCIe in ls1021a defconfigs and removes unused PCIe related macro defines. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-09-12 07:05:01 +0000