summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* Merge git://git.denx.de/u-boot-x86Tom Rini2014-11-24-256/+334
|\ | | | | | | | | | | | | Conflicts: arch/x86/cpu/Makefile Signed-off-by: Tom Rini <trini@ti.com>
| * x86: ivybridge: Implement SDRAM initSimon Glass2014-11-21-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: chromebook_link: Enable GPIO supportSimon Glass2014-11-21-3/+1
| | | | | | | | | | | | | | Enable GPIO support and provide the required GPIO setup information to the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Enable PCI in early initSimon Glass2014-11-21-2/+12
| | | | | | | | | | | | Enable PCI so we can access devices that need to be set up before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: Build a .rom file which can be flashed to an x86 machineSimon Glass2014-11-21-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | On x86 machines U-Boot needs to be added to a large ROM image which is then flashed onto the target board. The ROM has a particular format so it makes sense for U-Boot to build this image automatically. Unfortunately it relies on binary blobs so we cannot require this for the default build as yet. Create a u-boot.rom output file for this purpose. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: Add chromebook_link boardSimon Glass2014-11-21-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: config: Move common x86 configs to a common fileSimon Glass2014-11-21-256/+260
| | | | | | | | | | | | | | | | Many of the x86 CONFIG options will be common across different boards. Move them to a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | sandbox: Use md5sum and fatwrite to enable testing of fs commandsSuriyan Ramasami2014-11-23-0/+2
| | | | | | | | | | | | | | | | | | | | Enable md5sum to obtain the MD5 of the read and written files to check their contents for validity. Use map_sysmem() to map buffer in a sandbox environment. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | config: remove redundant CONFIG_SYS_PROMPT definesMasahiro Yamada2014-11-23-8/+0
| | | | | | | | | | | | | | | | Since commit 0defddc851ed (config: Add a default CONFIG_SYS_PROMPT), each board header does not need to define CONFIG_SYS_PROMPT as long as it uses the default prompt "=> ". Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARM1136 definesMasahiro Yamada2014-11-20-14/+5
| | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM1136 was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM1136 and replaces the only reference in arch/arm/lib/cache.c with CONFIG_CPU_ARM1136. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARM926EJS definesMasahiro Yamada2014-11-20-25/+2
| | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM926EJS was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM926EJS and replaces the only reference in arch/arm/lib/cache.c with CONFIG_CPU_ARM926EJS. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARM920T definesMasahiro Yamada2014-11-20-9/+4
| | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM920T was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM920T and replaces the only reference in drivers/usb/host/ohci-hcd.c with CONFIG_CPU_ARM920T. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARM1176 definesMasahiro Yamada2014-11-20-2/+0
| | | | | | | | | | | | CONFIG_ARM1176 is defined for some boards but not referenced at all. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: remove CONFIG_ARMV7 definesMasahiro Yamada2014-11-20-12/+1
|/ | | | | | | | Some (not all) of ARMv7 boards define CONFIG_ARMV7, which is useless. Besides, it is never referenced. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2014-11-19-44/+44
|\
| * blackfin: convert to use CONFIG_SYS_I2C frameworkScott Jiang2014-11-17-23/+23
| | | | | | | | Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
| * blackfin: rename bfin-twi_i2c driver to adi_i2cScott Jiang2014-11-17-21/+21
| | | | | | | | Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini2014-11-19-0/+4
|\ \
| * | powerpc: mpc52xx: a3m071/a4m2k: Convert to generic boardStefan Roese2014-11-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | a3m071 and a4m2k share one config header. So adding the generic board defines in this one file is enough to convert both boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| * | powerpc: mpc52xx: a4m072: Convert to generic boardStefan Roese2014-11-19-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | | mpc83xx: Add gdsys hrcon boardDirk Eibach2014-11-19-0/+614
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
* | | board: dlvision: Reduce memory footprintDirk Eibach2014-11-19-1/+8
|/ / | | | | | | | | | | | | | | Tune dlvision configuration similar to other gdsys boards to reduce memory footprint. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
* | ARM: atmel: add sama5d4 xplained ultra board supportBo Shen2014-11-17-0/+216
| | | | | | | | | | | | | | | | | | | | | | The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display (optional, disabled by default) - Support ethernet - Support USB mass storage Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: atmel: add sama5d4ek board supportBo Shen2014-11-17-0/+214
| | | | | | | | | | | | | | | | | | | | | | The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm, spl, at91: add spl support for the corvus boardHeiko Schocher2014-11-17-4/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | replaces the at91bootstrap code with SPL code. make the spl image with: ./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin this writes the length of the spl image into the 6th execption vector. This is needed from the ROM bootloader. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm, at91, spl: add spl support for the taurus boardHeiko Schocher2014-11-17-1/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | replaces the at91bootstrap code with SPL code. make the spl image with: ./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin this writes the length of the spl image into the 6th execption vector. This is needed from the ROM bootloader. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm, at91: add spi dataflash support for the taurus boardHeiko Schocher2014-11-17-0/+10
| | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common headerHeiko Schocher2014-11-17-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h and define a default value. Delete this define in the board config files, where it is possible (all boards use currently the same value). Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91 series: convert to generic boardBo Shen2014-11-17-0/+6
| | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2014-11-17-6/+0
|\ \
| * | sh: Move SH_32BIT to KconfigNobuhiro Iwamatsu2014-11-17-3/+0
| | | | | | | | | | | | | | | | | | | | | This moves SH_32BIT to Kconfig, and removes SH_32BIT from config files. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | sh: move CONFIG_{SH2, SH2A, SH3, SH4} to KconfigMasahiro Yamada2014-11-13-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit moves CONFIG_SH2, CONFIG_SH2A, CONFIG_SH3, CONFIG_SH4 to Kconfig renaming into CONFIG_CPU_SH2, CONFIG_CPU_SH2A, CONFIG_CPU_SH3, CONFIG_CPU_SH4, respectively because arch/sh/Kconfig of Linux uses CONFIG_CPU_SH* convention. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2014-11-17-289/+205
|\ \ \ | |_|/ |/| |
| * | arm: rmobile: replacement of common parts of config by rcar-gen2-common.hNobuhiro Iwamatsu2014-11-17-363/+18
| | | | | | | | | | | | | | | | | | | | | | | | Common part of config for lager, koelsch, alt and gose board will be able to replace rcar-gen2-common.h. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: configs: Collect up common part of config for R-Car SoCsNobuhiro Iwamatsu2014-11-17-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | The lager, koelsch, alt, gose board supported in rmobile is distinguished as the R-Car Gen2 series and has much common setting. This collect up the common part of config as rcar-gen2-common.h. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Change clock of SCIF to external clockNobuhiro Iwamatsu2014-11-10-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Change clock of SCIF for Alt board is used to external clock. This changes to using external clock. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: Move rcar-i2c of the address defined to common headerNobuhiro Iwamatsu2014-11-10-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | R-Car SoCs of rmobile have same IP of rcar-i2c, and have same address. This moves rcar-i2c of the address defined to rcar-base.h as common header of R-Car SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: Move sh-i2c of the address defined to common headerNobuhiro Iwamatsu2014-11-10-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | R-Car SoCs of rmobile have same IP of sh-i2c, and have same address. This moves sh-i2c of the address defined to rcar-base.h as common header of R-Car SoCs, and headers of each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: alt: Remove board_late_init functionNobuhiro Iwamatsu2014-11-10-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Alt board does not use board_late_init function. This removes this function and define of BOARD_LATE_INIT from config. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: lager: Remove board_late_init functionNobuhiro Iwamatsu2014-11-10-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Lager board does not use board_late_init function. This removes this function and define of BOARD_LATE_INIT from config. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: koelsch: Remove board_late_init functionNobuhiro Iwamatsu2014-11-10-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Koelsch board does not use board_late_init function. This removes this function and define of BOARD_LATE_INIT from config. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: gose: Add VFAT file system supportNobuhiro Iwamatsu2014-11-10-0/+6
| | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: gose: Add USB supportNobuhiro Iwamatsu2014-11-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Gose board has two USB ports, and can use USB EHCI HCD driver of rmobile. This adds driver settings in order to use this driver. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: gose: Add Ethernet supportNobuhiro Iwamatsu2014-11-10-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | Gose board has one ether port, this works using sh-ether driver. This adds GPIO settings and driver settings in order to use the sh-ether. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: rmobile: Add support gose boardNobuhiro Iwamatsu2014-11-10-0/+150
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The gose board has R8A7793, 1GB DDR3-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - DDR3-SDRAM - SCIF - QSPI - SPI Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-11-14-2/+149
|\ \
| * | powerpc/85xx: enable some P1/P2 boards mtdparts for nor flashYangbo Lu2014-11-14-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable these boards mtdparts for nor flash: p1020rdb-pd, p1021rdb-pc, p1022ds, p1025twr, and p2020rdb-pc. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Scott Wood <scottwood@freescale.com>
| * | keymile/powerpc: move to the architecture-generic board systemValentin Longchamp2014-11-14-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts all the Keymile powerpc boards to the generic board initialization. This includes the 3 Keymile powerpc subsystems: km82xx, km83xx, and kmp204x. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | powerpc/BSC9131RDB: Enable creation of dynamic partitions for NANDAshish Kumar2014-11-14-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fdt_fixup_mtdparts is called from ft_board_setup * Run "mtdparts default" to create NAND partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NORAshish Kumar2014-11-14-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fdt_fixup_mtdparts is called from ft_board_setup * run "mtdparts default" to create NAND, NOR partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-12-17 18:32:27 +0000