summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* powerpc/t104xrdb: Add T1042RDB board supportvijay rai2014-09-24-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | T1042RDB is a Freescale reference board that hosts the T1042 SoC (and variants). The board is similar to T1040RDB, T1042 is a reduced personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). T1042RDB is configured with serdes protocol 0x86 which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 DTSEC1, DTSEC2 are not connected on board. This Patch - add T1042RDB support - updates README file for T1042RDB details and update commands for switching to alternate banks from vBank0 to vBank4 and vice versa This patch also does minor clean ups for fdt defines for T1042RDB and T1042RDB_PI board Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-bootvijay rai2014-09-24-0/+3
| | | | | | | | | | | | This patch adds support of rcw for T1042RDB, it makes following changes : - Adds t1042_rcw.cfg file for serdes protocol 0x86 for T1042RDB - Renames t1042_pi_rcw.cfg file from t1042_rcw.cfg and also updates comments for valid serdes protocol which is 0x06 - Also updates CONFIG_SYS_FSL_PBL_RCW for T1042RDB Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-09-21-13/+20
|\
| * am335x_evm: Add boot script support to am335x_evmGuillaume GARDET2014-09-17-11/+18
| | | | | | | | | | | | | | This patch adds boot script support to am335x_evm Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
| * OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' ↵Guillaume GARDET2014-09-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'. This patch uses generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage' for OMAP4 boards. This allows to use EXT partition instead of FAT, while keeping FAT compatibility. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
* | ARM: at91sam9rlek: convert to generic board supportWu, Josh2014-09-19-0/+2
| | | | | | | | | | Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91sam9n12ek: convert to generic board supportWu, Josh2014-09-19-0/+1
| | | | | | | | | | Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: atmel: sama5d3xek: enable NOR flash supportBo Shen2014-09-19-1/+12
| | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-17-6/+311
|\ \ | |/
| * imx: mx6slevk: Change to use generic boardYe.Li2014-09-11-0/+2
| | | | | | | | | | | | Enable CONFIG_SYS_GENERIC_BOARD for imx6slevk to use generic board. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6q/dlarm2: Change to use generic boardYe.Li2014-09-11-0/+2
| | | | | | | | | | | | | | Enable the CONFIG_SYS_GENERIC_BOARD for imx6q/dl arm2 board to use generic board. Signed-off-by: Ye.Li <B37916@freescale.com>
| * mx6sxsabresd: Add PCI supportFabio Estevam2014-09-09-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested with an Intel Wireless PCI 7260HMW card: U-Boot 2014.10-rc1-16576-g4a8a8a8-dirty (Aug 23 2014 - 16:05:11) CPU: Freescale i.MX6SX rev1.0 at 792 MHz Reset cause: WDOG Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6qsabreauto: Remove imx6q-sabreauto.dtsFabio Estevam2014-09-09-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fa9c021632473 ("mx6: add example DTB for mx6qsabreauto") introduced 'imx6q-sabreauto.dts' but it adds no real value as the dts file only contains the 'model' and 'compatible' strings. After this commit the final binary is also changed from 'u-boot.imx' to 'u-boot-dtb.imx', which may confuse users. So revert it until a more complete and useful device tree could be provided. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be ↵Guillaume GARDET2014-09-09-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | filesystem independent nitrogen6x.h file defines CONFIG_CMD_FS_GENERIC, so we are able to use generic 'load' command instead of 'fatload'. It allows to use ext filesystem and keep compatibilty with fat filesystem. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
| * imx: ventana: add pci fixup for PLX PEX860x switch GPIOTim Harvey2014-09-09-0/+1
| | | | | | | | | | | | | | | | Most Gateworks Ventana boards use a PLX PEX860x PCIe switch for PCIe expansion. These boards use GPIO on the PLX device as PERST# for the downstream ports thus we assert this when the PLX is enumerated. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * arm: mx6: cm_fx6: add sata supportNikita Kiryanov2014-09-09-0/+34
| | | | | | | | | | | | | | | | | | Add support for SATA. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm_fx6: use eepromNikita Kiryanov2014-09-09-0/+2
| | | | | | | | | | | | | | | | | | | | Use Compulab eeprom module to obtain revision number, serial number, and mac address from the EEPROM. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm_fx6: add i2c supportNikita Kiryanov2014-09-09-0/+11
| | | | | | | | | | | | | | | | | | | | Add support for all 3 I2C busses on Compulab CM-FX6 CoM. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm_fx6: add usb supportNikita Kiryanov2014-09-09-0/+10
| | | | | | | | | | | | | | | | | | Add USB and USB OTG host support for Compulab CM-FX6 CoM. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm_fx6: add ethernet supportNikita Kiryanov2014-09-09-2/+14
| | | | | | | | | | | | | | | | | | | | Add ethernet support for Compulab CM-FX6 CoM Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: cm_fx6: add nand supportNikita Kiryanov2014-09-09-1/+30
| | | | | | | | | | | | | | | | | | | | Add NAND support for Compulab CM-FX6 CoM. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * arm: mx6: add support for Compulab cm-fx6 CoMNikita Kiryanov2014-09-09-0/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Compulab CM-FX6 CoM. Support includes MMC, SPI flash, and SPL with dynamic DRAM detection. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * compulab: eeprom: add support for defining eeprom i2c busNikita Kiryanov2014-09-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create CONFIG_SYS_I2C_EEPROM_BUS #define to tell the EEPROM module what I2C bus the EEPROM is located at. Make cl_eeprom_read() switch to that bus when reading EEPROM. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2014-09-13-1/+13
|\ \
| * | dm: tegra: Enable driver model for serialSimon Glass2014-09-10-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use driver model for serial ports. Since Tegra now uses driver model for serial, adjust the definition of V_NS16550_CLK so that it is clear that this is only used for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | sandbox: Convert serial driver to use driver modelSimon Glass2014-09-10-0/+3
| | | | | | | | | | | | | | | | | | | | | Adjust the sandbox serial driver to use the new driver model uclass. The driver works much as before, but within the new framework. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | tegra: Convert tegra GPIO driver to use driver modelSimon Glass2014-09-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an implementation of GPIOs for Tegra that uses driver model. It has been tested on trimslice and also using the new iotrace feature. The implementation uses a top-level GPIO device (which has no actual GPIOS). Under this all the banks are created as separate GPIO devices. The GPIOs are named as per the Tegra datasheet/header files: A0..A7, B0..B7, ..., Z0..Z7, AA0..AA7, etc. Since driver model is not yet available before relocation, or in SPL, a special function is provided for seaboard's SPL code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: tegra: Set up a pre-reloc malloc()Simon Glass2014-09-10-0/+1
| | | | | | | | | | | | | | | | | | Allocate 1KB so that driver model can operate before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-12-193/+280
|\ \ \ | |/ / |/| / | |/
| * Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-09-09-1/+1
| |\
| | * sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILEIan Campbell2014-09-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch is the result of: sed -i -e 's/FTDFILE/FDTFILE/g' board/sunxi/Kconfig configs/* include/configs/sunxi-common.h sed -i -e 's/ftdfile/fdtfile/g' board/sunxi/Kconfig Reported-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> [ ijc -- s/Spotted-by/Reported-by/ and resolve conflict vs "remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS" ]
| * | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-09-09-11/+226
| |\ \
| | * | CONFIGS: peach-pit: Enable display for peach_pit boardAjay Kumar2014-09-05-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable drivers for FIMD, DP and parade bridge chip. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos_fb: Remove usage of static definesAjay Kumar2014-09-05-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we used to statically assign values for vl_col, vl_row and vl_bpix using #defines like LCD_XRES, LCD_YRES and LCD_COLOR16. Introducing the function exynos_lcd_early_init() would take care of this assignment on the fly by parsing FIMD DT properties, thereby allowing us to remove LCD_XRES and LCD_YRES from the main config file. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | odroid: kconfig: add odroid_defconfigPrzemyslaw Marczak2014-09-05-0/+216
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This config is valid for two devices: - Odroid X2, - Odroid U3. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | AM335x: igep0033: Convert to generic board and use ti_am335x_common.h.Enric Balletbo i Serra2014-09-04-178/+43
| | | | | | | | | | | | | | | | | | | | | To reduce code duplication update am335x_igep0033.h to use ti_am335x_common.h and convert to generic board. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
| * | omap3_beagle: Add boot script support to omap3 beagle boardGuillaume GARDET2014-09-04-3/+10
| |/ | | | | | | | | | | | | This patch adds boot script support to omap3 beagle board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
* | ls102xa: dcu: Add platform support for DCU on LS1021ATWR boardWang Huan2014-09-08-0/+18
| | | | | | | | | | | | | | This patch adds the TWR_LCD_RGB card/HDMI options and the common configuration for DCU on LS1021ATWR board. Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | arm: ls102xa: Add basic support for LS1021ATWR boardWang Huan2014-09-08-0/+273
| | | | | | | | | | | | | | | | | | | | | | | | | | LS102xA is an ARMv7 implementation. This patch is to add basic support for LS1021ATWR board. One DDR controller DUART1 is used as the console For the detail board information, please refer to README. Signed-off-by: Chen Lu <chen.lu@freescale.com> Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com>
* | arm: ls102xa: Add basic support for LS1021AQDS boardWang Huan2014-09-08-0/+389
|/ | | | | | | | | | | | | | | LS102xA is an ARMv7 implementation. This patch is to add basic support for LS1021AQDS board. One DDR controller DUART1 is used as the console For the detail board information, please refer to README. Signed-off-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Jason Jin <jason.jin@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini2014-08-31-2/+9
|\
| * nios2: rebase nios2-generic board to 3c120 reference designThomas Chou2014-08-30-2/+9
| | | | | | | | | | | | | | | | | | Though nios2-generic board meant to be a template, it is helpful to be able to test on a real hardware. As the nios2 linux is developed and tested on a 3c120 FPGA based Golden Hardware Reference Design, it makes sense to rebase nios2-generic on this FPGA design. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | nomadik: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-2/+0
| | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the Nomadik board select menu to nomadik/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="nomadik"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | orion5x: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-1/+0
| | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the Orion5x board select menu to orion5x/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="orion5x"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | omap5: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP5 board select menu to omap5/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap5"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Tom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
* | omap4: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP4 board select menu to omap4/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap4"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Tom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
* | omap3: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-16/+0
| | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP3 board select menu to omap3/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap3 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Tom Rini <trini@ti.com>
* | kirkwood: kconfig: refactor Kconfig and defconfigMasahiro Yamada2014-08-30-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the KirkWood board select menu to kirkwood/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="kirkwood"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Prafulla Wadasdkar <prafulla@marvell.com> Cc: Luka Perkov <luka@openwrt.org>
* | rmobile: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-5/+0
| | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the Rmobile board select menu to rmobile/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="rmobile"). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* | tegra: kconfig: move board select menu and common settingsMasahiro Yamada2014-08-30-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Becuase the board select menu in arch/arm/Kconfig is too big, move the Tegra board select menu to tegra/Kconfig. Insert the Tegra SoC select menu between the arch select and the board select. Architecture select |-- Tegra Platform (Tegra) |- Tegra SoC select (Tegra20 / 30 / 114 / 124) |- Board select Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows: config TEGRA bool select SPL Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-09-19 19:33:26 +0000