summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* imx27lite: Reenable MTD support on NOR flash.Detlev Zundel2009-12-14-0/+1
| | | | | | | | | The support for this was silently dropped by a configuration split during the merge of the imx27lite board support in commit 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common handling of FLASH devices via MTD layer). Signed-off-by: Detlev Zundel <dzu@denx.de>
* microblaze: Stop stack clobbering in microblaze-generic.Graeme Smecher2009-12-08-1/+1
| | | | | | | | | A typo caused the stack and malloc regions to overlap, which prevented mem_malloc_init() from returning. This commit makes the memory layout match the example described in include/configs/microblaze-generic.h Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: Michal Simek <monstr@monstr.eu>
* 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config filesBecky Bruce2009-12-02-63/+0
| | | | | | | A bunch of the 85xx boards have this cruft in them - it's not used anywhere. Delete it. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* MIMC200: set default fbmem valueMark Jackson2009-11-22-1/+1
| | | | | | | This patch adds a default bootargs "fbmem" value to the CONFIG_BOOTARGS string for the MIMC200 board. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* ppc4xx: Initialize magnetic couplers in PLU405Matthias Fuchs2009-11-17-1/+2
| | | | | | | | | This patch fixes an ugly behavior of the IL712 magnetic couplers as used on PLU405. These parts will remember their last state over a power cycle which might cause unwanted behavior. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-11-11-3/+1
|\
| * Fix SMC91111 regression: lpd7a40x build failuresBen Warren2009-11-09-3/+1
| | | | | | | | | | | | | | | | | | | | | | Both lpd7a400 and lpd7a404 failed to compile because they had CONFIG_SMC_USE_IOFUNCS defined: examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw' Also removed an orphaned paren in lpd7a404.h Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)Stefan Roese2009-11-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem only seen very occasionally on Canyonlands. The NOR flash interface (CFI driver) doesn't work reliably in all cases. Erasing and/or programming sometimes doesn't work. Sometimes with an error message, like "flash not erased" when trying to program an area that should have just been erased. And sometimes without any error messages. As mentioned above, this problem was only seen rarely and with some PLL configuration (CPU speed, EBC speed). Now I spotted this problem a few times, when running my Canyonlands with the following setup (chip_config): 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 Changing the EBC configuration to not release the bus into high impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1 in EBC0_CFG) seems to fix this problem. I haven't seen any failure anymore with this patch applied. Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Mitchell <dmitchell@amcc.com> Cc: Jeff Mann <MannJ@embeddedplanet.com>
* | sbc8349: fix incorrect commentWolfgang Denk2009-10-28-1/+1
|/ | | | | | | | The comment for the BR0_PRELIM port size initialization incorrectly stated 32 bit, while it's actually 16 bit. The code is correct. Reported-by: Guenter Koellner <guenter.koellner@nsn.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix Compliation warning for TNY-A9260 and TNY-A9G20Sandeep Paulraj2009-10-28-0/+1
| | | | | | | The patch fixes a compilation warning by defining CONFIG_SYS_64BIT_VSPRINTF in the config file Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Fix Compliation warning for SBC35-A9G20 boardSandeep Paulraj2009-10-28-0/+1
| | | | | | | The patch fixes a compilation warning by defining CONFIG_SYS_64BIT_VSPRINTF in the config file Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* galaxy5200: Add default environment variablesEric Millbrandt2009-10-28-2/+8
| | | | | | | Extend bootdelay to 10 seconds. Set boot retry time to 120 seconds and use reset to retry. Define default bootcommand and bootargs for production. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
* Coding Style cleanup; update CHANGELOG, prepare -rc1v2009.11-rc1Wolfgang Denk2009-10-28-2/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc85xx: Add eLBC NAND support for MPC8569E-MDS boardsAnton Vorontsov2009-10-27-0/+23
| | | | | | | | Simply add some defines, and adjust TLBe setup to include some space for eLBC NAND. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc85xx: Add eSDHC support for MPC8569E-MDS boardsAnton Vorontsov2009-10-27-0/+16
| | | | | | | | | | | | | | | | | | eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* xpedite5370: Enable multi-core supportPeter Tyser2009-10-27-0/+8
| | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk2009-10-24-94/+1004
|\
| * TI OMAP3 SDP3430: Initial SupportTom Rix2009-10-24-0/+369
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start of support of Texas Instruments Software Development Platform(SDP) for OMAP3430 - SDP3430 Highlights of this platform are: Flash Memory devices: Sibley NOR, Micron 8bit NAND and OneNAND Connectivity: 3 UARTs and expanded 4 UART ports + IrDA Ethernet, USB Other peripherals: TWL5030 PMIC+Audio+Keypad VGA display Expansion ports: Memory devices plugin boards (PISMO) Connectivity board for GPS,WLAN etc. Completely configurable boot sequence and device mapping etc. Support default jumpering and: - UART1/ttyS0 console(legacy sdp3430 u-boot) - UART3/ttyS2 console (matching other boards, and SDP HW docs) - Ethernet - mmc0 - NOR boot Currently the UART1 is enabled by default. for compatibility with other OMAP3 u-boot platforms, enable the #define of CONSOLE_J9. Conflicts: Makefile Fixed the conflict with smdkc100_config by moving omap_sdp3430_config to it is alphabetically sorted location above zoom1. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * TI DaVinci: Adding Copyright for DM365 EVMSandeep Paulraj2009-10-24-0/+1
| | | | | | | | | | | | | | Forgot to add Copyright while submitting the patch. This patch adds the copyright. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci Sonata: Add Config option for 64 bit SupportSandeep Paulraj2009-10-18-0/+1
| | | | | | | | | | | | | | | | | | | | Adding the CONFIG_SYS_64BIT_VSPRINTF fot the DM644x based Sonata Without this option enabled while performing NAND operations we will get wrong diagnostic messages. Example if the MTD NAND driver find a bad block while erasing from a certain address, it will say bad block skipped at 0x00000000. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci DVEVM: Add Config option for 64 bit SupportSandeep Paulraj2009-10-18-0/+1
| | | | | | | | | | | | | | | | | | | | Adding the CONFIG_SYS_64BIT_VSPRINTF in the DVEVM config. Without this option enabled while performing NAND operations we will get wrong diagnostic messages. Example if the MTD NAND driver find a bad block while erasing from a certain address, it will say bad block skipped at 0x00000000. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci DM365: Add Config option for 64 bit SupportSandeep Paulraj2009-10-18-0/+1
| | | | | | | | | | | | | | | | | | | | Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM365 EVM config. Without this option enabled while performing NAND operations we will get wrong diagnostic messages. Example if the MTD NAND driver find a bad block while erasing from a certain address, it will say bad block skipped at 0x00000000. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci DM355: Add Config option for 64 bit SupportSandeep Paulraj2009-10-18-0/+1
| | | | | | | | | | | | | | | | | | | | Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM355 EVM config. Without this option enabled while performing NAND operations we will get wrong diagnostic messages. Example if the MTD NAND driver find a bad block while erasing from a certain address, it will say bad block skipped at 0x00000000. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI: OMAP3: Remove SZ_xx referencesSandeep Paulraj2009-10-18-56/+49
| | | | | | | | | | | | | | This patch removes dependency on the sizes.h header file and removes all references to SZ_xx. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * OMAP3: Update Overo and Beagle environmentSteve Sakoman2009-10-18-16/+38
| | | | | | | | | | | | | | | | Update default environment to support new kernel DSS2 subsystem and simplify rootfs type and location changes. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * TI: DaVinci: DM355 Leopard board supportSandeep Paulraj2009-10-18-0/+162
| | | | | | | | | | | | | | This patch adds support for the leopard board which is based on the DM355 SOC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci DM646x: Adding initial support for DM6467 EVMSandeep Paulraj2009-10-18-0/+132
| | | | | | | | | | | | | | This patch adds the initial support for DM6467 EVM. Other features like NET and NAND support will be added as follow up patches. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * AT91 CPUAT91 Fix compiler warningEric Benard2009-10-18-2/+2
| | | | | | | | | | | | | | | | | | | | This change fixes the compiler warning main.c: In function 'abortboot': main.c:122: warning: too few arguments for format Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * AT91 CPU9260 CPU9G20 Fix compile warningsEric Benard2009-10-18-0/+1
| | | | | | | | | | | | | | | | | | | | This change fixes the compiler warning nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boardskevin.morfitt@fearnside-systems.co.uk2009-10-13-20/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and s3c2410 cpu's which fixes various problems such as the timeouts in tftp being too short. Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have any s3c2400 or s3c2410 boards but need this patch applying before I can submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no new warnings or errors were found. It was originally submitted on 21/06/2009 but didn't get into the 2009.08 release, and Jean-Pierre made one comment on the original patch (see http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two changes to the original patch: - it's been re-based to the current release - I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it directly to the maintainers of all except the sbc2410 which doesn't have an entry in MAINTAINERS. Signed-off-by: Kevin Morfitt <kmorfitt@aselaptop-1.localdomain> Tested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * s5pc1xx: add support SMDKC100 boardMinkyu Kang2009-10-13-0/+242
| | | | | | | | | | | | | | Adds new board SMDKC100 that uses s5pc100 SoC Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-10-24-0/+8
|\ \
| * | ppc4xx: Sequoia: Add chip_config commandStefan Roese2009-10-23-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the Sequoia "bootstrap" command and replaces it with the now common command "chip_config". Please note that the patches with the dynamic PCI sync clock configuration have to be applied, before this one should go in. This is because Sequoia has 2 different bootstrap EEPROMs, and the old bootstrap command configured different values depending on the detected PCI async clock (33 vs. 66MHz). With the PCI sync clock patches, this is not necessary anymore. The PCI sync clock will be configured correctly on-the-fly now. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Update flash size in reg property of the NOR flash nodeStefan Roese2009-10-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now only the ranges in the ebc node are updated with the values currently configured in the PPC4xx EBC controller. With this patch now the NOR flash size is updated in the device tree blob as well. This is done by scanning the compatible nodes "cfi-flash" and "jedec-flash" for the correct chip select number. This size fixup is enabled for all AMCC eval board right now. Other 4xx boards may want to enable it as well, if this problem with multiple NOR FLASH sizes exists. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-10-24-2/+2
|\ \ \ | |/ / |/| |
| * | mpc83xx: cosmetic comment update relating to SPD EEPROMPaul Gortmaker2009-10-09-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 did the big rename of CFG_ macros to CONFIG_SYS macros. But it missed a couple of instances within comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | mcc200: fix build errorWolfgang Denk2009-10-19-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix compile error: include/configs/mcc200.h:401:6: error: #elif with no expression Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | galaxy5200: change cs1 configurationEric Millbrandt2009-10-18-1/+1
| | | | | | | | | | | | | | | | | | Correct the chip select configuration for the nand flash chip select. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
* | | mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL definePaul Gortmaker2009-10-16-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is an orphaned legacy leftover that is just polluting the config file namespace. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | ppc/P1_P2_RDB: On-chip BootROM supportDipen Dudhat2009-10-16-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | On Chip BootROM support for P1 and P2 series RDB platforms. This patch is derived from latest On Chip BootROM support on MPC8536DS Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | ppc/P1_P2_RDB: NAND Boot SupportDipen Dudhat2009-10-16-7/+65
| |/ |/| | | | | | | | | | | | | | | NAND Boot support for P1 and P2 series RDB platforms. This patch is derived from NAND Boot support on MPC8536DS. Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | at91: Update MEESC board supportDaniel Gorsulowski2009-10-13-17/+8
| | | | | | | | | | | | | | | | | | | | | | This patch implements several updates: -disable CONFIG_ENV_OVERWRITE -add new hardware style variants and set the arch numbers appropriate -pass the serial# and hardware revision to the kernel -removed unused macros from include/configs/meesc.h -fixed multiline comment style Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* | TI: OMAP3: Overo Tobi ethernet supportOlof Johansson2009-10-13-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded over tftp. This also refactors the smc911x driver to allow for detecting when the chip is missing. I.e. the detect_chip() function is called earlier and will abort gracefully when the Chip ID read returns all 1's. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Dirk Behme <dirk.behme@googlemail.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | TI OMAP3 Use arm init sequence to initialize i2cTom Rix2009-10-13-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes fixes an early i2c error. It appears that I2C is working because once a read or write error is detected, the omap24xx_i2c driver calls i2c_init inside its error handling check. While it is ok to attempt error handling this way, the boards must not depend on this side effect to initialize it's i2c. Instead of explicitly calling i2c_init for every board, use the generic arm initialization in lib_arm/board.c. By defining the config variable CONFIG_HARD_I2C, the omap3 i2c initialization is included in the init_sequence table. Run tested on Beagle. Compile tested on the omap3's Signed-off-by: Tom Rix <Tom.Rix@windriver.com> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
* | Support for the OpenRD base boardSimon Kagstrom2009-10-13-0/+220
| | | | | | | | | | | | | | The implementation is borrowed from the sheevaplug board and the Marvell 1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
* | Add support for Eukrea CPU9260/CPU9G20 SBCTom Rix2009-10-13-0/+453
| | | | | | | | | | | | | | | | | | these boards are built around Atmel's AT91SAM9260/9G20 and have up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND and include a 10/100 Ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* | Add support for Eukrea CPUAT91 SBCTom Rix2009-10-13-0/+228
| | | | | | | | | | | | | | | | | | CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* | TI: DaVinci DM365: Minor config cleanupSandeep Paulraj2009-10-13-2/+0
| | | | | | | | | | | | | | | | | | | | The DM365 config was using the 'CONFIG_CMD_SAVEENV' flag. This is already included when we include the config_cmd_default.h header file. So this flag is removed. Also another flag to enable NAND functions was being enabled incorrectly. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | TI DaVinci: DM355: Config Cleanup and UpdateSandeep Paulraj2009-10-13-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does the following 1) Enables the NAND driver which is now available. 2) Enables the 'CONFIG_MTD_DEVICE' as without this the compilation will fail 3) We now have a safe place to store environment and defines an offset where this can be stored. This offset value is such that it is after the location where U-Boot is flashed using TI flash utilities. 4) Enables Bootdelay 5) Increases malloc() arena size. Manufacturers are coming out with NAND with large blocks sizes of upto 1 MiB. It has been noticed that as the block size of the NAND used is increased, if this particular value is not increased, the NAND driver will output out of memory errors. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | TI DaVinci: DM6446: Fix Compilation error in NAND modeSandeep Paulraj2009-10-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The Default mode that is built for the Davinci DVEVM happens to be the NOR mode. When we want to build for the NAND mode, we get a compilation error. This is overcome by defining the CONFIG_MTD_DEVICE flag in the NAND mode. The image built for NAND mode was successfully tested on the DaVinci DM6446 EVM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
generated by cgit v1.1 at 2024-08-26 20:43:22 +0000