summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unusedThomas Weber2011-12-06-53/+0
| | | | | | | | | | | This patch removes the definition of stack sizes for irq and fiq if the CONFIG_USE_IRQ is undefined before. Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Luca Ceresoli <luca.ceresoli@comelit.it>
* ARM: OMAP3: Remove unused define SDRC_R_C_BThomas Weber2011-12-06-45/+0
| | | | | | | | | | | This patch removes the unused definition of SDRC_R_C_B from the config files. Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Luca Ceresoli <luca.ceresoli@comelit.it> Acked-by: Tom Rini <trini@ti.com>
* ARM: OMAP3: Remove unused define CONFIG_OMAP3430Thomas Weber2011-12-06-13/+0
| | | | | | | | | | This patch removes the CONFIG_OMAP3430, because it is unused. Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Luca Ceresoli <luca.ceresoli@comelit.it>
* omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addressesAneesh V2011-12-06-15/+21
| | | | | | | | | | | | | | | | | | | | | | | | Change the CONFIG_SYS_TEXT_BASE and the addresses of SDRAM buffers used by SPL(heap and BSS) keeping in mind the following requirements: 1. Make sure that SPL's heap and BSS doesn't come in the way of Linux kernel, which is typically loaded at 0x80008000. This will be important when SPL directly loads kernel. 2. Align the CONFIG_SYS_TEXT_BASE between TI internal U-Boot and mainline U-Boot. This avoids a lot of confusion and allows for the inter-operability of x-loader, SPL, internal U-Boot, mainline U-Boot etc. The internal U-Boot's address can not be changed to that of mainline U-Boot as internal U-Boot doesn't have relocation and 0x80100000 used by mainline U-Boot will clash with kernel 3. Assume only a minimum amount of memory that may be available on any practical OMAP4/5 board in future too. We are assuming a minimum of 128 MB of memory Signed-off-by: Aneesh V <aneesh@ti.com>
* omap: fix cache line size for omap3/omap4 boardsAneesh V2011-12-06-0/+17
| | | | | | Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* omap4: ttyO2 instead of ttyS2 in default bootargsAneesh V2011-12-06-1/+1
| | | | | | | Set console=ttyO2 instead of ttyS2 in default bootargs according to latest kernel config Signed-off-by: Aneesh V <aneesh@ti.com>
* PXA: Flip colibri_pxa27x to pxa-common.hMarek Vasut2011-12-06-35/+1
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Introduce common configuration header for PXAMarek Vasut2011-12-06-0/+60
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Cleanup Colibri PXA270Marek Vasut2011-12-06-36/+37
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]XMarek Vasut2011-12-06-10/+10
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Unify vpac270 environment sizeMarek Vasut2011-12-06-12/+2
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* PXA: Enable command line editing for vpac270Marek Vasut2011-12-06-0/+2
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Adapt Voipac PXA270 to OneNAND SPLMarek Vasut2011-12-06-5/+20
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> V2: Add missing u-boot-spl.lds, convert bitshifts to division, convert to spl_onenand_load_image()
* PXA: Fixup PXA25x boards after start.S updateMarek Vasut2011-12-06-4/+4
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Drop XM250 boardMarek Vasut2011-12-06-369/+0
| | | | | | | | The board is unmaintained and maintainer doesn't respond. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* PXA: Drop PLEB2 boardMarek Vasut2011-12-06-266/+0
| | | | | | | | The board is unmaintained and maintainer doesn't respond. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* PXA: Drop CRADLE boardMarek Vasut2011-12-06-358/+0
| | | | | | | | The board is unmaintained and maintainer doesn't respond. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* PXA: Drop CERF250 boardMarek Vasut2011-12-06-229/+0
| | | | | | | | The board is unmaintained and maintainer doesn't respond. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* Ethernut 5 board supportTim Schendekehl2011-12-06-0/+287
| | | | | | | | | | | | Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC. V4 - Fix several coding style issues. - Move machine type to config file. - Remove use of CONFIG_ATMEL_LEGACY. Signed-off-by: Tim Schendekehl <tim.schendekehl@egnite.de>
* ARM: remove duplicated code for LaCie boardsSimon Guinot2011-12-06-168/+21
| | | | | | | | | | This patch groups together all the common functions for LaCie boards: Ethernet PHY and MAC address initializations. Moreover the configurations for LaCie Kirkwood boards are merged into a single file: include/configs/lacie_kw.h Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* ARM: add support for LaCie 2Big Network v2Simon Guinot2011-12-06-0/+161
| | | | | | | | | | This patch adds support for the LaCie 2Big Network v2 board, based on the Marvell Kirkwood 6281 SoC. Additional information is available at: http://lacie-nas.org/doku.php?id=2big_network_v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* netspace_v2: Read Ethernet MAC address from EEPROMSimon Guinot2011-12-06-0/+1
| | | | Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* omap3evm: Add support for EFI partitionsSanjeev Premi2011-12-06-0/+1
| | | | | | | | | Defines CONFIG_EFI_PARTITION for OMAP3 EVM. Signed-off-by: Sanjeev Premi <premi@ti.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-12-05-5/+5
|\ | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: Makefile: add tools/mkenvimage to target 'clean' mv_common.c: get rid of 'defined but not used' warning m68k: fix ambiguous bit testing sparc: fix unknown escape sequence warnings sparc: fix unused variable warnings sf: fix erase debug output
| * sparc: fix unknown escape sequence warningsMike Frysinger2011-12-05-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't know what exactly the code was going for, but the object code is the same before/after my change, and in looking at the env strings, this seems to be OK. Otherwise gcc warns: cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' cc1: warning: unknown escape sequence: '\040' cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | sh: Add support for ecovec boardNobuhiro Iwamatsu2011-12-02-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: espt: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7763rdp: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add a flag which controls the DDR ECC mode of sh7757lcrNobuhiro Iwamatsu2011-12-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | When DDR-ECC is effective, the physical memory which can be used reduces this boardby half. However, this mode can chenge to disable. When it was disabled, user can use 512 MB of physical memory. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Acked-by: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7757lcr: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
|/ | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-12-02-0/+568
|\ | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Add Io64 board support ppc4xx: fix PMC440 painit command ppc4xx: remove invalid access to PCI_BRDGOPT2 register ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation
| * ppc4xx: Add Io64 board supportDirk Eibach2011-12-01-0/+566
| | | | | | | | | | | | | | Board support for the Guntermann & Drunck Io64. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementationMatthias Fuchs2011-12-01-0/+2
| | | | | | | | | | | | | | | | | | This patch switches PMC440 board code to the CONFIG_PCI_BOOTDELAY option instead of using a private implemention. This relies on Anatolji's patch that moves the pcidelay handling behind pci_target_init. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-12-01-26/+662
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: support for Freescale COM Express P2020 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning mpc85xx: support board-specific reset function powerpc/85xx: verify the localbus device tree address before booting the OS mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification powerpc/p3060qds: Add board related support for P3060QDS platform powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: Add workaround for erratum A-003474 powerpc/85xx: fixup flexcan device tree clock-frequency powerpc/85xx: Add workaround for erratum CPU-A003999
| * | mpc85xx: support for Freescale COM Express P2020Ira W. Snyder2011-11-29-0/+576
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/p3060qds: Add board related support for P3060QDS platformShengzhou Liu2011-11-29-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: clean up and document the QE/FMAN microcode macrosTimur Tabi2011-11-29-19/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several macros are used to identify and locate the microcode binary image that U-boot needs to upload to the QE or Fman. Both the QE and the Fman use the QE Firmware binary format to package their respective microcode data, which is why the same macros are used for both. A given SOC will only have a QE or an Fman, so this is safe. Unfortunately, the current macro definition and usage has inconsistencies. For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address of NAND. There's no way to know by looking at a variable how it's supposed to be used. In the future, the code which uploads QE firmware and Fman firmware will be merged. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.hTimur Tabi2011-11-29-6/+2
| |/ | | | | | | | | | | | | | | | | | | | | Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | x86: Provide more configuration granularityGraeme Russ2011-11-29-0/+5
|/ | | | | | Planned future ports requires more granularity for some options Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata boardChristian Riesch2011-11-27-0/+2
| | | | | | | | This patch fixes the build breakage for the davinci_sonata board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
* davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie boardChristian Riesch2011-11-27-0/+3
| | | | | | | | This patch fixes the build breakage for the davinci_schmoogie board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
* arm: a320evb: define mach-type in board config fileYan-Pai Chen2011-11-27-0/+6
| | | | | | | | MACH_TYPE_FARADAY was dropped from mach-types.h. Add it back to board config file. Signed-off-by: Yan-Pai Chen <ypchen@faraday-tech.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* Fix Stelian's email addressStelian Pop2011-11-27-12/+12
| | | | | | | Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* microblaze: usable uart16550 for big endian systemsStephan Linz2011-11-27-2/+6
| | | | | | | | | | | | | As a result of the commit 6833260 the uart16550 driver is broken for Microblaze big endian systems, because of the missing 3 byte offset. Other than as described, not all U-Boot BSP will treat properly the 3 byte offset. This why prefer to mask out the 3 byte offset in general and setup correct _REG_SIZE value depending on edianess. Signed-off-by: Stephan Linz <linz@li-pro.net> Tested-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-niosWolfgang Denk2011-11-21-0/+4
|\ | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-nios: nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet(). board/nios2-generic: Use altera_pio driver and remove board specific driver gpio: Add driver for Altera's PIO core nios2: Pseudo implement dcache_status/enable/disable()
| * board/nios2-generic: Use altera_pio driver and remove board specific driverJoachim Foerster2011-10-28-0/+4
| | | | | | | | | | Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-11-16-1016/+1021
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
| * | omap5: Add omap5_evm board build support.Sricharan2011-11-15-0/+284
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the build support for the omap5_evm board. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | omap4/5: Add support for booting with CH.Sricharan2011-11-15-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration header(CH) is 512 byte header attached to an OMAP boot image that will help ROM code to initialize clocks, SDRAM etc and copy U-Boot directly into SDRAM. CH can help us in by-passing SPL and directly boot U-boot, hence it's an alternative for SPL. However, we intend to support both CH and SPL for OMAP4/5. Initialization done through CH is limited and is not equivalent to that done by SPL. So U-Boot has to distinguish between the two cases and handle them accordingly. This patch takes care of doing this. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | omap5: Add minimal support for omap5430.Sricharan2011-11-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
generated by cgit v1.1 at 2024-08-21 13:16:25 +0000