summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* net: removed board-specific CONFIGs from MPC5xxx FEC driverBen Warren2009-02-09-27/+45
| | | | | | | Added new CONFIG options for the three type of MAC-PHY interconnect and applied them all relevant board config files Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* mpc8641hpcn: Change PCI MEM pci bus addressBecky Bruce2009-02-10-1/+10
| | | | | | | | | | Now that the rest of u-boot can support it, change the PCI bus address of the PCI MEM regions from 0x80000000 to 0xc0000000, and use the same bus address for both PCI1 and PCI2. This will maximize the amount of PCI address space left over to map RAM on systems with large amounts of memory. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* MPC8641HPCN: Enable CONFIG_ADDR_MAPBecky Bruce2009-02-10-0/+2
| | | | Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc8641hpcn: Clean up PCI mapping conceptsBecky Bruce2009-02-10-6/+11
| | | | | | | | | Clean up PCI mapping concepts in the 8641 config - rename _BASE to _BUS, as it's actually a PCI bus address, separate virtual and physical addresses into _VIRT and _PHYS, and use each appopriately. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc8641hpcn: Use physical address in flash banks defintionBecky Bruce2009-02-10-1/+1
| | | | | | | If the VA and PA of the flash aren't the same, the banks list should be initialized to hold the physical address. Correct this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk2009-02-07-10/+30
|\
| * Coldfire: M5271EVB: Board header update (dependencies)Richard Retanubun2009-02-06-10/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup for M5271EVB: Added clarification on the use of CONFIG_SYS_CLOCK. Modified to use u-boot's HUSH parser. Cleanup on environment settings. Removed compiler warning by defining CONFIG_SYS_CS0_* Dependencies: Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. This depends on a patch to include/asm-m68k/m5271.h that defines the multiplier and divider ratios. Removed the definition of CONFIG_SYS_FECI2C. This depends on a patch that removes the use of it in cpu/mcf52x2/cpu_init.c Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
* | ADS5121 Add PATA supportRalph Kondziella2009-02-03-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | Original patch from Ralph Kondziella plus clean up by Wolfgang Denk plus changes by John Rigby use ips clock not lpc port forward to current u-boot release Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: John Rigby <jrigby@freescale.com>
* | ADS5121 Add IC Ident Module (IIM) supportMartha Marx2009-02-03-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | IIM (IC Identification Module) is the fusebox for the mpc5121. Use #define CONFIG_IIM to turn on the clock for this module use #define CONFIG_CMD_FUSE to add fusebox commands. Fusebox commands include the ability to read the status, read the register cache, override the register cache, program the fuses and sense them. Signed-off-by: Martha Marx <mmarx@silicontkx.com> Signed-off-by: John Rigby <jrigby@freescale.com>
* | ADS5121 DIU Make inclusion of FSL logo optionalJohn Rigby2009-02-03-0/+1
|/ | | | | | | Make inclusion of FSL logo optional and turn it off by default. Signed-off-by: John Rigby <jrigby@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-02-01-3/+1831
|\
| * SX1: add hardware V2 supportJean-Christophe PLAGNIOL-VILLARD2009-01-29-2/+6
| | | | | | | | | | | | In the V2 the 2 flash has been replace by one 32MB flash Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * SX1: Fix second flash mappingJean-Christophe PLAGNIOL-VILLARD2009-01-29-1/+1
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbttyJean-Christophe PLAGNIOL-VILLARD2009-01-29-0/+2
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * OMAP3: Add Zoom1 board supportDirk Behme2009-01-28-0/+326
| | | | | | | | | | | | | | | | Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * OMAP3: Add Pandora supportDirk Behme2009-01-28-0/+320
| | | | | | | | | | | | | | | | Add Pandora support. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * OMAP3: Add EVM boardDirk Behme2009-01-28-0/+345
| | | | | | | | | | | | | | | | Add EVM board support. Signed-off-by: Manikandan Pillai <mani.pillai@ti.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * OMAP3: Add Overo boardDirk Behme2009-01-28-0/+318
| | | | | | | | | | | | | | | | Add Overo board support. Signed-off-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
| * OMAP3: Add common power code, README, and BeagleBoardDirk Behme2009-01-28-0/+325
| | | | | | | | | | | | | | Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
| * Initial support for Nomadik 8815 development boardAlessandro Rubini2009-01-24-0/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | The NMDK8815 board is distributed by ST Microelectornics. Other (proprietary) code must be run to unlock the CPU before U-Boot runs. doc/README.nmdk8815 outlines the boot sequence. This is the initial port, with basic infrastructure and a working serial port. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-02-01-0/+1
|\ \
| * | sh: sh7763rdp: Update sh7763rdp configNobuhiro Iwamatsu2009-01-24-0/+1
| |/ | | | | | | | | | | | | Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ixpWolfgang Denk2009-02-01-8/+12
|\ \
| * | ixp: move serial to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+7
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | ixp: move pci drivers to drivers/pciJean-Christophe PLAGNIOL-VILLARD2009-01-31-0/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | ixp: remove the option to include the MicrocodeJean-Christophe PLAGNIOL-VILLARD2009-01-31-8/+4
| | | | | | | | | | | | | | | | | | | | | instead the board will have to load it from flash or ram which will be specified by npe_ucode env var Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | ppc4xx: Clean up configuration file for Korat boardLarry Johnson2009-01-29-34/+50
|/ / | | | | | | | | | | | | | | This patch updates the default environmental variables for the Korat PPC 440EPx board, and makes additional minor fixes. Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | SPD823TS: do not define CONFIG_CMD_ENVMike Frysinger2009-01-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since the SPD823TS board does not actually have any writable flash to save its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is disabled. This fixes the build error: common/libcommon.a(cmd_nvedit.o): In function `do_saveenv': common/cmd_nvedit.c:557: undefined reference to `saveenv' make: *** [u-boot] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-01-28-14/+18
|\ \
| * | usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platformThomas Abraham2009-01-28-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling USB MSC support for DM6446 (TI DaVinci) platform in the configuration file. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Thomas Abraham <t-abraham@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * | usb.h: use standard __LITTLE_ENDIAN from Linux headersMike Frysinger2009-01-28-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than forcing people to define a custom "LITTLEENDIAN", just use the __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is already setting up. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | | Blackfin: overhaul i2c driverMike Frysinger2009-01-28-41/+6
|/ / | | | | | | | | | | | | | | | | | | | | The current Blackfin i2c driver does not work properly with certain devices due to it breaking up transfers incorrectly. This is a rewrite of the driver and relocates it to the newer place in the source tree. Also remove duplicated I2C speed defines in Blackfin board configs and disable I2C slave address usage since it isn't implemented. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2009-01-27-0/+340
|\ \
| * | MIPS: Add VCT board series support (Part 2/3)Stefan Roese2009-01-27-0/+340
| |/ | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config filesMatthias Fuchs2009-01-26-24/+0
| | | | | | | | | | | | | | | | | | Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59. Either they define or undef it. Because it's not used in any source files this patch removes any references to it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add GDsys PowerPC 440 ETX board support.Dirk Eibach2009-01-26-0/+194
|/ | | | | | | | Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-01-24-105/+209
|\
| * 85xx: Add a 36-bit physical configuration for MPC8572DSKumar Gala2009-01-23-1/+46
| | | | | | | | | | | | | | We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary to allow for larger memory sizes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Handle eLBC difference w/36-bit physicalKumar Gala2009-01-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The eLBC only handles 32-bit physical address in systems with 36-bit physical. The previos generation of LBC handled 34-bit physical address in 36-bit systems. Added a new CONFIG option to convey the difference between the LBC and eLBC. Also added defines for XAM bits used in LBC for the extended 34-bit support. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Use BR_ADDR macro for NAND chipselectsKumar Gala2009-01-23-8/+8
| | | | | | | | | | | | | | | | | | Use the new BR_ADDR macro to properly setup the address field of the localbus chipselects used by NAND. This allows us to deal with 36-bit phys on these boards in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boardsKumar Gala2009-01-23-6/+28
| | | | | | | | | | | | | | | | | | Introduce a new define to seperate out the virtual address that PCI IO space is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
| * 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boardsKumar Gala2009-01-23-26/+56
| | | | | | | | | | | | | | | | | | Introduce a new define to seperate out the virtual address that PCI memory is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
| * 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boardsKumar Gala2009-01-23-0/+1
| | | | | | | | | | | | | | | | Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields of TLBs. This is what we should have always been using from the start. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
| * 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boardsKumar Gala2009-01-23-28/+28
| | | | | | | | | | | | | | Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead of _IO_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boardsKumar Gala2009-01-23-52/+52
| | | | | | | | | | | | | | | | Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead of _MEM_BASE so we are more explicit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
| * 85xx: separate FLASH BASE virtual from physical addressKumar Gala2009-01-23-8/+10
| | | | | | | | | | | | | | | | | | | | Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash. This allows us to deal with 36-bit phys on these boards in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
| * 85xx: separate PIXIS virtual from physical addressKumar Gala2009-01-23-2/+4
| | | | | | | | | | | | | | | | | | | | Added a PIXIS_BASE_PHYS for use as the physical address and maintain PIXIS_BASE as the virtual address of the PIXIS fpga registers. This allows us to deal with 36-bit phys on these boards in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-01-24-0/+586
|\ \
| * \ Merge branch 'next'Kim Phillips2009-01-23-119/+1160
| |\ \ | | |/ | |/|
| | * mpc83xx: New board support for SIMPC8313Ron Madrid2009-01-23-0/+544
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will create a new board, SIMPC8313, from Sheldon Instruments. This board boots from NAND devices and is configureable for either large or small page devices. The board supports non-soldered DDR2, one ethernet port, a Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected to the eLBC providing glue logic to a TMS320C67xx DSP. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
generated by cgit v1.1 at 2024-11-19 17:23:38 +0000