summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* drivers/block: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-13-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* serial: move CFG_NS9750_UART to CONFIG_NS9750_UARTJean-Christophe PLAGNIOL-VILLARD2008-08-13-1/+1
| | | | | | move also conditional compilation to Makefile Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLEJean-Christophe PLAGNIOL-VILLARD2008-08-13-8/+8
| | | | | | move also conditional compilation to Makefile Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* NAND boot: MPC8313ERDB supportScott Wood2008-08-12-16/+66
| | | | | | | | | Note that with older board revisions, NAND boot may only work after a power-on reset, and not after a warm reset. I don't have a newer board to test on; if you have a board with a 33MHz crystal, please let me know if it works after a warm reset. Signed-off-by: Scott Wood <scottwood@freescale.com>
* mpc8313erdb: Enable NAND in config.Scott Wood2008-08-12-0/+2
| | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* Coding style cleanup, update CHANGELOG, prepare releaseWolfgang Denk2008-08-12-14/+14
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* MVBC_P: fix compile problemWolfgang Denk2008-08-12-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d configBecky Bruce2008-08-11-0/+2
| | | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-08-11-74/+459
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2008-08-10-0/+9
| |\
| | * sh: Update sh7763rdp configNobuhiro Iwamatsu2008-08-09-0/+9
| | | | | | | | | | | | | | | | | | Add sh_eth support to sh7763rdp. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc512xWolfgang Denk2008-08-10-2/+3
| |\ \
| | * | mpc5121: squash some fdt fixup errorsJohn Rigby2008-08-05-2/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ADS5121 when booting linux the following errors are seen: Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND This is caused by ft_cpu_setup trying to deal with both old and new soc node naming. This patch fixes this by being smarter about what to fixup. Also do soc node fixups by compatible instead of by path. A new board config called OF_SOC_COMPAT defined to be "fsl,mpc5121-immr" replaces the old OF_SOC node path that was defined to be "soc@80000000". Old device trees still work, but the compatiblity is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES which is on by default in include/configs/ads5121.h. Signed-off-by: John Rigby <jrigby@freescale.com>
| * | TQM8xx{L,M}: try to normalize config files for TQM8xx? based boardWolfgang Denk2008-08-09-67/+440
| | | | | | | | | | | | | | | | | | | | | | | | | | | - enable CFI driver where this was forgotten - enable mtdparts support - adjust default environment etc. Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | TQM823L: re-enable logo support; update LCD_INFO textWolfgang Denk2008-08-08-0/+2
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | TQM8xxL: fix support for second flash bankWolfgang Denk2008-08-08-5/+5
| |/ | | | | | | | | | | | | | | When switching the TQM8xxL modules to use the CFI flash driver, support for the second flash bank was broken because the CFI driver did not support dynamically sized banks. This gets fixed now. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per ↵Steven A. Falco2008-08-07-6/+6
|/ | | | | | | | | | | schematic. The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Fix remaining build issues with MPC8xx FADS boards.Jean-Christophe PLAGNIOL-VILLARD2008-08-03-3/+3
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'Jean-Christophe PLAGNIOL-VILLARD2008-08-03-2/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix build issues with MPC8xx FADS boards.Wolfgang Denk2008-08-01-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix printf() format problems with configurable promptsWolfgang Denk2008-07-31-49/+73
| | | | | | | | | | | | | | | U-Boot allows for configurable prompt strings using the CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far, the assumption was that any such user defined problts would contain exactly one "%d" format specifier. But some boards did not. To allow for flexible boot prompts without adding too complex code we now allow to specify the whole list of printf() arguments in the user definition. This is powerful, but requires a responsible user who really understands what he is doing, as he needs to know for exanple which variables are available in the respective context. Signed-off-by: Wolfgang Denk <wd@denx.de>
* E1000: clean up CONFIG_E1000_FALLBACK_MAC handlingWolfgang Denk2008-07-31-1/+1
| | | | | | | Avoid "integer constant is too large for 'long' type" warnings. And simplify the code. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-07-31-8/+0
|\
| * Remove unused I2C at apollon boardKyungmin Park2008-07-31-8/+0
| | | | | | | | | | | | There are no I2C devices on this board. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | at91rm9200dk, csb637: fix NAND related build problemsWolfgang Denk2008-07-31-16/+9
|/ | | | | | | Tried fixing NAND support for the at91rm9200dk board; untested. Disabled NAND support in the csb637 board config file. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Adder8xx: Fix CFG_MONITOR_LENFrank Svendsbøe2008-07-30-1/+1
| | | | | | | | | Due to increased space usage, U-Boot can no longer be stored in three sectors. The current U-Boot use just over three flash sectors (197k), and U-Boot will become corrupt after saving environment variables. This patch adds another 64k to CFG_MONITOR_LEN. Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
* Fix remaining CFG_CMD_ define, ifdef and commentsJean-Christophe PLAGNIOL-VILLARD2008-07-30-3/+3
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Removed support for the adsvix board.Adrian Filipi2008-07-30-365/+0
| | | | | | | | Support for the adsvix was originally provided by Applied Data Systems (ADS), inc., now EuroTech, Inc. The board never shipped aside from some sample boards. Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2008-07-15-0/+316
|\
| * mpc5xxx: Add MVBC_P board supportAndre Schwarz2008-07-15-0/+316
| | | | | | | | | | | | | | | | The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc86xxWolfgang Denk2008-07-15-8/+8
|\ \
| * | Update Freescale sys_eeprom.c to handle CCID formatsTimur Tabi2008-07-15-8/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The NXID format replaces the older CCID format, but it's important to support both since most boards out there still use the CCID format. This change is in preparation for using one file to handle both formats. This will also unify EEPROM support for all Freescale 85xx and 86xx boards. Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR instead of ID_EEPROM_ADDR. Signed-off-by: Timur Tabi <timur@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2008-07-15-82/+136
|\ \ | |/ |/|
| * Clean up INIT_RAM optionsAndy Fleming2008-07-14-17/+5
| | | | | | | | | | | | | | | | | | The L2_INIT_RAM option was unused, and recent changes to the TLB code meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce the amount of mapped space attached to nothing, we change things so the TLBs get cleared. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Remove fake flash bank from 8544 DSAndy Fleming2008-07-14-2/+2
| | | | | | | | | | | | | | | | The fake flash bank was generating errors for anyone who didn't have a PromJET hooked up to the board. As that constitutes the vast majority of users, we remove it. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * MPC8544DS: Add ATI Video card supportKumar Gala2008-07-14-2/+22
| | | | | | | | | | | | Add support for using a PCIe ATI Video card on PCIe2. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * sbc8560: enable CONFIG_OF_LIBFDT by defaultPaul Gortmaker2008-07-14-0/+5
| | | | | | | | | | | | | | Make the default build for the sbc8560 board be powerpc capable with libfdt support. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * Fix indentation for default boot environment variablesAndy Fleming2008-07-14-19/+19
| | | | | | | | | | | | | | This was proposed by Paul Gortmaker in response to Wolfgang's comments on similar #defines in sbc8560.h. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * sbc8560: add default fdt valuesPaul Gortmaker2008-07-14-5/+33
| | | | | | | | | | | | | | | | | | | | Add in the default fdt settings and the typical EXTRA_ENV settings as borrowed from the mpc8560ads. Fix a couple of stale references to the mpc8560ads dating back to the original clone/fork. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * sbc8560: define eth0 and eth1 instead of eth1 and eth2Paul Gortmaker2008-07-14-26/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing config doesn't define CONFIG_HAS_ETH0, and so the fdt support doesn't update the zeros in the dtb local-mac with real data from the u-boot env. Since the existing config is tailored to just two interfaces, get rid of the ETH2 definitions at the same time. Also don't include any end user specific data into the environment by default -- things like MAC address, network parameters etc. need to come from the end user. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * sbc8560: proper definitions for TSEC.Paul Gortmaker2008-07-14-10/+22
| | | | | | | | | | | | | | | | | | The definitions for the TSEC have become out of date. There is no longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. Update to match those of other boards, like the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
| * Remove LBC_CACHE_BASE from 8544 DSAndy Fleming2008-07-14-2/+0
| | | | | | | | | | | | | | | | | | | | The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping space for some anyway, we were allowing speculative loads into unmapped space, which would cause an exception (annoying, even if ultimately harmless). Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the problem. Signed-off-by: Andy Fleming <afleming@freescale.com>
* | Fix some more printf() format issues.Wolfgang Denk2008-07-13-5/+4
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722Michal Simek2008-07-13-1/+1
| | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stefan Roese <sr@denx.de>
* Enable passing of ATAGs required by latest Linux kernel.Marcel Ziswiler2008-07-13-0/+4
|
* ARM: Fix for broken compilation when defining CONFIG_CMD_ELFHugo Villeneuve2008-07-13-0/+1
| | | | | | caused by missing dcache status/enable/disable functions. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
* Fix compile error caused by missing timer functionTsiChung Liew2008-07-11-0/+2
| | | | | | Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* ColdFire: Fix code flash configuration for M547x/M548x boardsTsiChung Liew2008-07-11-4/+4
| | | | Signed-off-by: Kurt Mahan <kmahan@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc512xWolfgang Denk2008-07-10-7/+32
|\
| * Configuration changes for ADS5121 Rev 3Martha Marx2008-07-10-7/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ADS5121 Rev 3 board is now the default config config targets are now ads5121_config Rev 3 board with PCI M41T62 on board RTC 512MB DRAM ads5121_rev2_config Rev 2 board with No PCI 256MB DRAM Signed-off-by: Martha Marx <mmarx@silicontkx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: John Rigby <jrigby@freescale.com>
generated by cgit v1.1 at 2024-11-25 03:14:17 +0000