summaryrefslogtreecommitdiff
path: root/include/configs/socfpga_common.h
Commit message (Collapse)AuthorAgeLines
...
* arm: socfpga: Enable ubi and ubifs supportChin Liang See2015-12-22-0/+8
| | | | | | | | | | | | When QSPI and NAND is enabled, the ubi and ubifs support will be enabled too. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
* arm: socfpga: Enabling MTD default partitionsChin Liang See2015-12-22-1/+24
| | | | | | | | | | | | | | | | | | | | Enabling MTD default partitions if its not defined in board configuration file. The layout as below device nor0 <ff705000.spi.0>, # parts = 6 #: name size offset mask_flags 0: u-boot 0x00100000 0x00000000 0 1: env1 0x00040000 0x00100000 0 2: env2 0x00040000 0x00140000 0 3: UBI 0x03e80000 0x00180000 0 4: boot 0x00e80000 0x00180000 0 5: rootfs 0x01000000 0x01000000 0 Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
* arm: socfpga: Consolidate SDMMC environmentChin Liang See2015-12-22-0/+6
| | | | | | | | | | | | | Remove the duplication of SDMMC environment configuration from each boards' configuration header file into socfpga_common.h Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de>
* net: eth_designware: select PHYLIB in KconfigThomas Chou2015-12-22-1/+0
| | | | | | | | | | | | | | | Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB from legacy board header files. This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE are selected. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reported-by: Pavel Machek <pavel@denx.de> Acked-by: Chin Liang See <clsee@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* arm: socfpga: fix trivial header preprocessor for socfpga_common.hDinh Nguyen2015-12-20-3/+3
| | | | | | | Replace__CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ with __CONFIG_SOCFPGA_COMMON_H__ as the file is now called socfpga_common.h Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: remove note to add CONFIG_USB_DWC2_REG_ADDRDinh Nguyen2015-12-20-7/+0
| | | | | | | Now that the USB DWC2 probing is done from OF, remove this note to add CONFIG_USB_DWC2_REG_ADDR. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Switch CONFIG_HOSTNAME to CONFIG_SYS_BOARDMarek Vasut2015-12-20-0/+4
| | | | | | | | | | We already have the CONFIG_SYS_BOARD variable, which defines the name of the board. The value in CONFIG_HOSTNAME is exactly the same and is thus just a duplicity, so switch it to reuse CONFIG_SYS_BOARD . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Switch CONFIG_G_DNL_MANUFACTURER to CONFIG_SYS_VENDORMarek Vasut2015-12-20-1/+1
| | | | | | | | | | We already have the CONFIG_SYS_VENDOR variable, which defines the manufacturer of the board. The value in CONFIG_G_DNL_MANUFACTURER is just a duplicity, so switch it to reuse CONFIG_SYS_VENDOR . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
* usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to USB_GADGET_DWC2_OTG*Marek Vasut2015-12-17-1/+1
| | | | | | | | | | | | | The s3c-otg IP block is in fact a DWC2 OTG one, so finally rename the config option to make it less misleading. No functional change, just a mechanical change done using the following script: git grep USB_GADGET_S3C_UDC_OTG | cut -d : -f 1 | sort -u | \ while read line ; do sed -i "s/USB_GADGET_S3C_UDC_OTG/USB_GADGET_DWC2_OTG/g" $line ; done Signed-off-by: Marek Vasut <marex@denx.de>
* mmc: socfpga_dw_mmc: Move drvsel and smplsel to dtsChin Liang See2015-11-30-2/+0
| | | | | | | | | | | | | | | | | socfpga_dw_mmc driver will obtain the drvsel and smplsel value from device tree instead of definition in config header file. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
* sf: Move SPI flash drivers to defconfigBin Meng2015-11-25-3/+0
| | | | | | | | There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* spi: Move SPI drivers to defconfigBin Meng2015-11-25-2/+0
| | | | | | | | There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* ns16550: move CONFIG_SYS_NS16550 to KconfigThomas Chou2015-11-21-1/+0
| | | | | | Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* arm, powerpc: select SYS_GENERIC_BOARDMasahiro Yamada2015-10-24-1/+0
| | | | | | | | | | | We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arm: socfpga: Enable saveenv for SD/MMCDinh Nguyen2015-09-24-1/+0
| | | | | | Enable the able to save the environment variables when SD/MMC is used. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: Fix cache configurationStefan Roese2015-09-23-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By not defining CONFIG_SYS_ARM_CACHE_WRITEALLOC, the WRITEBACK cache policy is selected. This leads to much better performance on the SoCFPGA. A quick network test shows this: Without this patch: => tftp 100000 big-40mb Speed: 1000, full duplex Using dwmac.ff702000 device TFTP from server 192.168.1.54; our IP address is 192.168.1.252 Filename 'big-40mb'. Load address: 0x100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################## 2.5 MiB/s With this patch: => tftp 100000 big-40mb Speed: 1000, full duplex Using dwmac.ff702000 device TFTP from server 192.168.1.54; our IP address is 192.168.1.252 Filename 'big-40mb'. Load address: 0x100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################## 7.6 MiB/s A performance improvement of factor ~3. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de>
* arm: socfpga: Zap OF_CONTROL checks, it's always enabledMarek Vasut2015-09-04-4/+3
| | | | | | | The CONFIG_OF_CONTROL and CONFIG_SPL_OF_CONTROL is always enabled on Altera SoCFPGA, remove the unnecessary checks. Signed-off-by: Marek Vasut <marex@denx.de>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* arm: socfpga: config: Make CONFIG_SPI_FLASH_MTD usefulMarek Vasut2015-08-08-0/+4
| | | | | | | | Enable the mtdparts command and related options to make support for SPI NOR MTD useful in any way. With the mtdparts command in place, it is possible to use partition of the SPI NOR in U-Boot. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: config: Enable CONFIG_SPI_FLASH_BARMarek Vasut2015-08-08-0/+1
| | | | | | | This is needed to access broken (read: Micron) SPI flashes which are larger than 16 MiB and don't correctly support 4-byte addressing. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: config: Exclude CONFIG_SPI_FLASH_MTD from SPL buildMarek Vasut2015-08-08-0/+2
| | | | | | | We do not need full MTD support in the SPL build, it only adds size and is not usable in any way. Exclude it. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: config: Zap incorrect config optionsMarek Vasut2015-08-08-7/+2
| | | | | | | | | | | | | | There is no need to disable support for partitions in the SPL, we can support partitions in SPL perfectly well. This is likely some remnant from old times, so just remove this configuration option. Moreover, the CRC32 chunk size doesn't have to be adjusted anymore, since both the GD and malloc area are in RAM by the time this CRC check can be used and there's plenty of space. Zap this abomination as well. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: config: Move SPL GD and malloc to RAMMarek Vasut2015-08-08-6/+8
| | | | | | | | | | | Now that the SPL structure is organised such that it matches the U-Boot's SPL design, it is possible to use the option of relocating GD to RAM. And since we have GD in RAM, move malloc area to RAM as well. We point the malloc base pointer 1 MiB past U-Boot's load address. We use simple malloc for SPL because it is 3kiB smaller in terms of code size than regular malloc which was used thus far. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: misc: Export bootmode into environment variableMarek Vasut2015-08-08-0/+1
| | | | | | | | setenv an environment variable called "bootmode" , which contains the board boot mode. This can be in turn used in scripts to determine from where to load kernel and such. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add support for booting from QSPIMarek Vasut2015-08-08-0/+9
| | | | | | | Add code and configuration options to support booting from QSPI NOR. Enable support for booting from QSPI NOR. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Add support for booting from SD/MMCMarek Vasut2015-08-08-0/+14
| | | | | | | | | | Add code and configuration options to support booting from RAW SD/MMC card as well as for ext4/vfat filesystems. Enable support for booting from SD/MMC card, but don't enable the filesystem support just yet to retain compatibility with old SoCFPGA card format. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Remove custom linker scriptMarek Vasut2015-08-08-3/+0
| | | | | | | | Remove the custom SPL linker script, use the generic one instead. The custom script doesn't bring in anything new and is only burden to maintain. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: spl: Merge spl_board_init() into board_init_f()Marek Vasut2015-08-08-1/+0
| | | | | | | | | | The code in spl_board_init() should have been in board_init_f() from the beginning, since it is code which configures system and then starts DRAM. Thus, it cannot be in spl_board_init(), which is called from board_init_r() , which already expects a working DRAM. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: enable the Altera SDRAM controller driverDinh Nguyen2015-08-08-0/+5
| | | | | | | Enable the Altera SDRAM driver for the SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: USB download gadget and functions config options coherent namingPaul Kocialkowski2015-07-22-3/+3
| | | | | | | | | | | | This introduces a coherent scheme for naming USB download gadget and functions config options. The download USB gadget config option is moved to CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each function's config option is moved to a CONFIG_USB_FUNCTION_ prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-25-2/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: remove CONFIG_NET_MULTILars Poeschel2015-06-02-1/+0
| | | | | | | | | CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: Marek Vasut <marex@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
* ARM: socfpga: abolish CONFIG_SOCFPGAMasahiro Yamada2015-05-07-2/+0
| | | | | | Replace CONFIG_SOCFPGA with CONFIG_ARCH_SOCFPGA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: socfpga: move SoC sources to mach-socfpgaMasahiro Yamada2015-05-07-1/+1
| | | | | | Our recent trend is to collect SoC files into arch/arm/mach-(SOC). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arm: socfpga: spl: Adjust the SYS_INIT_RAM_SIZE to have room for the spl mallocDinh Nguyen2015-04-21-1/+1
| | | | | | | We need to adjust the SYS_INIT_RAM_SIZE to have room for the SPL_MALLOC_SIZE. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.hDinh Nguyen2015-04-21-0/+5
| | | | Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* arm: socfpga: spl: Add CONFIG_SPL_MAX_SIZE to be 64KBDinh Nguyen2015-04-21-0/+1
| | | | | | The Cyclone5 SoCFPGA has 64KB of OCRAM for SPL use. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* Kconfig: Move CONFIG_DESIGNWARE_ETH to KconfigSimon Glass2015-04-18-1/+0
| | | | | | | | | | Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Version 1: Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* arm: socfpga: Zap board_early_init_f()Marek Vasut2015-03-04-1/+0
| | | | | | | | | | | Zap this unused empty function, no point in having it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
* arm: socfpga: Zap checkboard()Marek Vasut2015-03-04-1/+1
| | | | | | | | | | | | | Since all boards now have a DT, instead of hard-coding the board name into the U-Boot binary, read the board name from DT "model" property. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
* dm: socfpga: Move driver model CONFIGs to KconfigSimon Glass2015-02-12-7/+0
| | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: socfpga: Change watchdog timeoutStefan Roese2014-12-21-1/+1
| | | | | | | | | | | | | | | | The current current watchdog timeout of 12 seconds is a bit small for booting into Linux, especially when using a NFS based rootfs. So lets change this timeout to a more defensive value of 30 seconds. Also we now call the hw_watchdog_init() function so that we override the value already configured from the Preloader. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de>
* arm: socfpga: DW_SPI: Remove clock info from config headerStefan Roese2014-12-06-4/+0
| | | | | | | | | | | | | Remove the now unnecessary clocking info from the SoCFPGA config header. As this info in now used directly in the SPI driver itself. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
* arm: socfpga: Add Designware (DW) SPI support to config headerStefan Roese2014-12-06-0/+12
| | | | | | | | | | | | | Enable support for the DW master SPI controller in the config header for the SoCFPGA. This controller can only be enabled, if DT support is enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de>
* arm: socfpga: Add Cadence QSPI support to config headerStefan Roese2014-12-06-1/+24
| | | | | | | | | | | | | | | | | | | | With this driver enabled for SoCFPGA, access to SPI NOR flash is supported. The configuration (page size, timing info) will be taken from the DT. See socrates as an example. This QSPI supports depends on DT. So QSPI is only enabled if CONFIG_OF_CONTROL is defined (see socfpga_socrates_defconfig). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* ARM: remove CONFIG_ARMV7 definesMasahiro Yamada2014-11-20-1/+0
| | | | | | | | Some (not all) of ARMv7 boards define CONFIG_ARMV7, which is useless. Besides, it is never referenced. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2014-11-11-0/+46
|\
| * arm: socfpga: Add example config entry for EPCS/EPCQ SPIMarek Vasut2014-10-31-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add example config file entry for the Altera SPI controller. This SPI controller can also, under special conditions, be used to operate the EPCS/EPCQ SPI NOR. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * arm: socfpga: Add I2C support to SoCFPGAStefan Roese2014-10-30-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds I2C support for the SoCFPGA. Using the designware I2C controller driver. It supports all 4 I2C busses on the SoCFPGA. The designware I2C driver has now been converted to the CONFIG_SYS_I2C framework. So lets enable it on SoCFPGA. Tested on SoCrates. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Heiko Schocher <hs@denx.de>
* | arm: socfpga: Add example UDC configMarek Vasut2014-11-07-1/+29
|/ | | | | | | | | | | | Add example of an USB UDC configuration with DFU and UMS. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
generated by cgit v1.1 at 2024-11-08 18:02:09 +0000