| Commit message (Collapse) | Author | Age | Lines |
|---|
| |
|
|
|
|
|
|
|
| |
brillo need bootlader support boot control.
bootlader can choose which slot(partition) to boot based on
it's tactic.
The commit support boot control for evk6ul
Signed-off-by: fang hui <b31070@freescale.com>
|
| |
|
|
|
|
|
|
|
| |
Windows DeviceIoControl SCSI_PASSTHROUGH is not stable when report media is
not ready.
Use dummy fat file to workaround this issue and avoid windows popup
format dialog.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
|
| |
|
|
|
|
|
|
| |
The current 36M offset will conflict with NAND FCB firmware2 when the
nand chip block is 1MB size. This patch change it to 36M + 1M offset,
so the redundant u-boot at firmware2 will not be broken.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
| |
The previous 8M address for NAND env might conflict with other boot
parameters as the NAND block size increasing, change it to 36M to avoid
it.
Signed-off-by: Han Xu <b45815@freescale.com>
|
| |
|
|
|
|
|
| |
Since the mx6ul 9x9 evk has different DDR size with 14x14 evk, change
to use the half of PHYS_SDRAM_SIZE for mtest end.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Need to check fuse bit 25 of bank 0 word 4 before initialize bee.
The bit: 0 means bee enabled, 1 means bee disabled.
If disabled, continuing initialize bee will cause system hang, so
need to check this bit before initialize bee.
Add macro to enable BEE in header file, default disabled.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
| |
|
|
|
|
|
| |
i.MX6UL-9x9-EVK board has PFUZE3000, so enable LDO
bypass support for this board.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Since the i.MX6ul 9x9 evk board only has 256MB LPDDR2, while the
CMA size used in kernel configuration is 320MB, so we have to set
another value for the 9x9 evk board.
This patch sets the cma=96M bootargs to in uboot. So the kernel will
overwrite to use the new value.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK
with two main changes on CPU board:
1. Change to use pfuze 3000.
2. Use 256MB LPDDR2 memory.
This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above,
basing on 14x14 EVK board level codes.
The new build target for the 9x9 EVK: mx6ul_9x9_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
| |
Abstracted the CSF size in imximage from a hardcoded value to a config
setting CONFIG_CSF_SIZE. This configuration is only enabled for secure
boot.
Increased the size of the CSF default allocation to 0x4000. This size
covers the event the worst case of 4906-bits keys.
|
|
|
Since there is another 9x9 package for mx6ul, modify the BSP names
of ddr3 arm2 board and evk board to add 14x14 package info.
Also modify the loaded dtb file to align with kernel.
After the change, the build target for mx6ul ddr3 arm2 board is:
mx6ul_14x14_ddr3_arm2_config
and the build target for mx6ul evk board is:
mx6ul_14x14_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
