summaryrefslogtreecommitdiff
path: root/include/configs/mx6sxsabresd.h
Commit message (Collapse)AuthorAgeLines
* MA-8541 env update will overwrite the uboot binaryChen Guoyin2016-08-09-2/+2
| | | | | | | | The uboot binary for auto 6q board may exceed the 512k The env offset need to be larger thn the uboot binary size Extend the env offset to 768k for all imx6/7 boards Signed-off-by: Chen Guoyin <guoyin.chen@freescale.com>
* MLK-11837 mfgtool: add dummy fat file to avoid windows popup format dialogFrank Li2015-11-11-0/+1
| | | | | | | | | Windows DeviceIoControl SCSI_PASSTHROUGH is not stable when report media is not ready. Use dummy fat file to workaround this issue and avoid windows popup format dialog. Signed-off-by: Frank Li <Frank.Li@freescale.com>
* MLK-11706: imx6sx: SabreSD: Expand malloc pool to 32MSandor Yu2015-10-16-1/+1
| | | | | | | | | | | Same issue as ENGR00321137, commit 3695635. GIS module need total 3M+3M+1.5M+1.5M=9M video memory. and sys reserved 16M memory for malloc. When gis module enabled, malloc may failed to allocate memory for other modules, that may cause system hang. Expand malloc pool to 32M. Signed-off-by: Sandor Yu <R01008@freescale.com>
* MLK-11059 imx: HAB unable to support Encrypted boot for 4096-bit keysUlises Cardenas2015-06-16-0/+6
| | | | | | | | Abstracted the CSF size in imximage from a hardcoded value to a config setting CONFIG_CSF_SIZE. This configuration is only enabled for secure boot. Increased the size of the CSF default allocation to 0x4000. This size covers the event the worst case of 4906-bits keys.
* MLK-10829-2 imx:mx6 support thermal for all mx6Peng Fan2015-05-06-3/+1
| | | | | | | | Move CONFIG_IMX_THERMAL to mx6_common.h Make CONFIG_MXC_OCOTP only depends on CONFIG_CMD_FUSE, since when THERMAL is not implemented, we may use fuse. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-29 imx:thermal change from CONFIG_IMX6_THERMAL to CONFIG_IMX_THERMALPeng Fan2015-04-29-2/+2
| | | | | | Change macro name to make driver support more platforms. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-16 imx:mx6sxsabresd update board and configPeng Fan2015-04-29-77/+215
| | | | | | | | | Update mx6sxsabresd board and config file Note: Fastboot Android support is not added. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* mx6sxsabresd: Use the default CONFIG_SYS_PBSIZEFabio Estevam2015-03-13-2/+0
| | | | | | | | | | | | | Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* dm: mx6: Adjust mx6sxsabresd to use Kconfig for DM_THERMALSimon Glass2015-02-19-2/+0
| | | | | | Use Kconfig instead of board config for DM and DM_THERMAL. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to KconfigSimon Glass2015-02-12-1/+0
| | | | | Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* imx: mx6: Change ENV offset to 512K bytes for larger u-boot imageYe.Li2015-01-22-1/+1
| | | | | | | To align with other mx6 boards, change ENV offset from 384KB to 512KB position to fit a larger u-boot image. Signed-off-by: Ye.Li <B37916@freescale.com>
* imx:mx6sxsabresd spl support in header filePeng Fan2015-01-22-0/+6
| | | | | | Add SPL support in mx6sxsabresd header file. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* mx6sxsabresd: Remove unneeded board_late_init()Fabio Estevam2015-01-19-1/+0
| | | | | | | | Since commit 1f98e31bc0b2c37a ("imx: mx6sxsabresd: Use the pfuze common init function") board_late_init() became empty, so we can safely remove this unneeded function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx:mx6sxsabresd support qspi AHB readPeng Fan2015-01-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_FSL_QSPI_AHB in header file to enable AHB in driver. In order to count the time, add CONFIG_CMD_TIME. Using AHB read can improve the the read speed about 30%. AHB read: => time sf read 0x8f800000 0 100000 SF: 1048576 bytes @ 0x0 Read: OK time: 0.174 seconds => time sf read 0x8f800000 1000000 100000 SF: 1048576 bytes @ 0x1000000 Read: OK time: 0.174 seconds IP read: => time sf read 0x8f800000 0 100000 SF: 1048576 bytes @ 0x0 Read: OK time: 0.227 seconds => time sf read 0x8f800000 1000000 100000 SF: 1048576 bytes @ 0x1000000 Read: OK time: 0.227 seconds Note: Quad read is not supported in driver, now. In my side, using AHB and Quad read can achieve about 16MB/s. Anyway, I have plan to reimplement the driver using DTB and DM, then make the code cleaner and more feature can be added. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* mx6sxsabresd: support qspi flash bigger than 16MBPeng Fan2015-01-07-0/+5
| | | | | | | | | | | mx6sxsabresd revb board uses 32MB qspi flash, reva board uses 16MB qspi flash. Currently, the default supported platform is revb board. If want to configure for reva board, just define CONFIG_MX6SX_SABRESD_REVA in mx6sxsabresd.h to support reva qspi flashes whose size is 16MB. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* imx:mx6sxsabresd add qspi supportPeng Fan2014-12-31-0/+12
| | | | | | | | | | | | | | | | | | Configure the pad setting and enable qspi clock to support qspi flashes access. Add QSPI related macro in configuration header file. Note: mx6sxsabresd Revb board, 32M flash is used, but in header file, CONFIG_SPI_FLASH_BAR is not defined, and we still use SZ_16M. The LUT initialization qspi_set_lut function uses 32BIT addr, however CONFIG_SPI_FLASH_BAR and 24BIT addr should be used to access bigger than 16MB size flash, and BRRD/BRWR should also be supported. Future patches will fix this. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-11-0/+14
|\ | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * imx:mx6sxsabresd add board level support for usbPeng Fan2014-11-14-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode There are two usb port on mx6sxsabresd board: 1. otg port 2. host port The following are the connection between usb controller and board usb interface, host port has not ID pin set: otg1 core <---> board otg port otg2 core <---> board host port In order to make host port work, board_usb_phy_mode return USB_INIT_HOST to make host port work in HOST mode. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <B37916@freescale.com>
* | mx6sxsabresd: Add thermal supportFabio Estevam2014-12-01-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Add thermal support so that the temperature of the chip can be displayed on boot: U-Boot 2015.01-rc1-18268-g1366c05-dirty (Nov 25 2014 - 13:02:42) CPU: Freescale i.MX6SX rev1.0 at 792 MHz CPU: Temperature 50 C Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3Ye.Li2014-11-20-2/+6
|/ | | | | | | | Add full support for USDHC2, USDHC3, USDHC4 on mx6sx sabresd board. The default boot socket is USDHC4, so the MMC environment device and mmcdev variable are set to this device. Signed-off-by: Ye.Li <B37916@freescale.com>
* mx6sxsabresd: Fix PCI reset and power GPIO assignmentsFabio Estevam2014-10-06-2/+2
| | | | | | | | PERST_GPIO and POWER_GPIO are currently swapped. Fix the GPIO assignments as per the board schematics. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDRPeng Fan2014-09-16-1/+1
| | | | | | | | | | | Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR which is used in board_mmc_init. If board_mmc_init failed, cpu_mmc_init->fsl_esdhc_mmc_init will use CONFIG_SYS_FSL_ESDHC_ADDR to initialize sdhc. So set this macro to correct value. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* mx6sxsabresd: Add PCI supportFabio Estevam2014-09-09-0/+10
| | | | | | | | | | | | | | | | | Tested with an Intel Wireless PCI 7260HMW card: U-Boot 2014.10-rc1-16576-g4a8a8a8-dirty (Aug 23 2014 - 16:05:11) CPU: Freescale i.MX6SX rev1.0 at 792 MHz Reset cause: WDOG Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sxsabresd: Add Ethernet supportFabio Estevam2014-08-20-0/+17
| | | | | | | | mx6sxsabresd board has 2 FEC ports, each one connected to a AR8031. Add support for one FEC port initially. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sxsabresd: Add PFUZE100 PMIC supportFabio Estevam2014-07-23-0/+13
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sx: Add initial support for mx6sxsabresd boardFabio Estevam2014-07-10-0/+186
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-12-21 01:41:15 +0000