summaryrefslogtreecommitdiff
path: root/include/configs/mx28evk.h
Commit message (Collapse)AuthorAgeLines
* mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selectedFabio Estevam2014-06-17-1/+4
| | | | | | | | | | | When building a target with CONFIG_ENV_IS_IN_SPI_FLASH the following warning is seen: include/configs/mx28evk.h:73:0: warning: "CONFIG_ENV_SIZE" redefined [enabled by default] Protect the definition of CONFIG_ENV_SIZE to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Set default environment to use zImageOtavio Salvador2014-02-11-13/+13
| | | | | | | | | Change the default environment to use zImage instead of uImage, this requires changes to the default environment to load a file named zImage instead of uImage, and to use the 'bootz' command instead of 'bootm' when booting the kernel. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: Extend environment to easy write of NAND systemOtavio Salvador2014-01-03-1/+34
| | | | | | | | | | | | | This adds following new targets: - update_nand_kernel - update_nand_fdt - update_nand_filesystem and to avoid confusion, the 'update_nand_full' has been renamed to 'update_nand_firmware_full'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: Add 'nandboot' environment commandOtavio Salvador2014-01-03-1/+17
| | | | | | | | | This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Use 512k for fdt partition to align itOtavio Salvador2014-01-03-1/+1
| | | | | | | | Using 512k for fdt partition allow it to be aligned with the other small partitions and 512k erase block size. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boardsFabio Estevam2013-11-13-1/+0
| | | | | | | | There is no real benefit in adding the board name into U-boot's prompt, so remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> " prompt is used across FSL boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge git://git.denx.de/u-boot-armStefano Babic2013-07-31-9/+1
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
| * Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-9/+1
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* | ARM: mxs: Consolidate configuration optionsMarek Vasut2013-07-24-132/+41
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull all the duplicate configuration options into configs/mxs.h from the board configuration files. This reduces the files greatly and makes them somewhat more readable. Besides, we do no longer have such a horrible duplication of code. Note that the mx23evk grew in size slightly. This is due to the CONFIG_SYS_CBSIZE now being set to 1024 as it is on the rest of MXS systems. This patch also fixes the OCRAM size for i.MX23. The i.MX23 has only 32kB of OCRAM, while i.MX28 has 128kB of OCRAM. I verified the configuration didn't change for each of the boards, but I didn't boot-test it on the boards I do not have. I configured U-Boot for each board using the "make ... <board>_config" command and then ran "cpp -I include -dM include/config.h" , which dumped all the configuration options. I did this both before and after this patch and finally compared the results for each MXS board. Actually, the results do differ slightly, since the configs/mxs.h file now properly includes the correct iomux-mx23.h or iomux-mx28.h , so while comparing, I had to ignore these new defines. These have no impact on U-Boot configuration though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx28evk: Add splash screen supportFabio Estevam2013-05-16-0/+17
| | | | | | Enable display support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-0/+1
|\ | | | | | | | | | | Conflicts: drivers/mtd/nand/mxc_nand_spl.c include/configs/m28evk.h
| * mx28evk: add trimffs to nand commandEric Benard2013-04-16-0/+1
| | | | | | | | | | | | | | | | this is usefull when writing an UBI image which contains and UBIFS volume (check README.nand and UBI FAQ for more details) Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* | mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NANDTom Rini2013-05-01-2/+2
|/ | | | | | | | The redundancy related defines are only correct for NAND, so guard all of that area with CONFIG_ENV_IS_IN_NAND Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
* mx28evk: Introduce a new target for saving env vars to NANDFabio Estevam2013-04-03-1/+30
| | | | | | | | | | | | | Introduce 'mx28evk_nand' target for saving environment variables into NAND. The mx28evk board does not come with a NAND flash populated from the factory. It comes with an empty slot (U23), which allows the insertion of a 48-pin TSOP flash device. Tested with a K9LBG08U0D. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: Disable CONFIG_CMD_I2CFabio Estevam2013-03-20-1/+0
| | | | | | | | | | | | | | | | When loading a Freescale 2.6.35 on a mx28evk the following issue is seen: sgtl5000_hw_read: read reg error : Reg 0x00 Device with ID register 0 is not a SGTL5000 Disabling CONFIG_CMD_I2C makes the sgtl5000 probe to succeed. Mainline kernel does not show this problem. Until the real cause is not identified, disable 'CONFIG_CMD_I2C' for the time being. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* configs: mx28evk: Use single-line commentsFabio Estevam2013-03-20-45/+15
| | | | | | | No need to use multi-line style comments for single-line contents. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
* mxs: Make ehci-mxs multiport capableMarek Vasut2013-03-07-1/+2
| | | | | | | | | | | Rework ehci-mxs so it supports both ports on MX28. It was necessary to wrap the per-port configuration into struct ehci_mxs_port and pull out the clock configuration function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLEMarek Vasut2013-03-07-1/+0
| | | | | | | | | | The CONFIG_MXS_SPI_DMA_ENABLE is no longer relevant as the SPI DMA has proven to work correctly. Remove this configuration option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky2013-01-28-1/+0
| | | | | | | It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mx28evk: Add support to dynamically choose between fdt use or notOtavio Salvador2013-01-13-3/+38
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: We shouldn't hardcode a rootfs filesystem typeOtavio Salvador2013-01-13-4/+2
| | | | | | | For a generic environment, we shouldn't have a fixed rootfs filesystem so we drop it from env. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* Merge remote-tracking branch 'u-boot/master' into u-boot-arm-mergedAllen Martin2012-12-19-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * m28evk/mx28evk: fix nand_update_fullEric Benard2012-12-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - since commit 418396e212b59bf907dbccad997ff50f7eb61b16 nand write.raw can take the number of page to be written as an argument. nand_update_full is passing the size (in bytes) to nand write.raw. This value was previously ignored but now breaks the write. - this patch updates the default environment of these boards to provide a pagecount instead of a size to nand write.raw. - tested on a mx28evk with a 4k page NAND and on a custom board with a 2k page NAND. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* | mx28evk: Configure CONFIG_BOOTDELAY to one secondFabio Estevam2012-11-19-1/+1
|/ | | | | | | One second is enough time for users to react in case they want to stop the booting process. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD2012-10-26-1/+1
|\
| * configs: Fix usage of mmc rescanAndrew Bradford2012-10-23-1/+1
| | | | | | | | | | | | | | | | Fix usage of 'mmc rescan' by many configs. Proper use is 'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan the device. 'mmc rescan' itself does not take any arguments. Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
* | MMC: MXS: Toggle the generic bounce buffer on the boardsMarek Vasut2012-10-22-1/+1
|/ | | | | | | | | | Flip the boards to use the generic bounce buffer instead of the MMC one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* mx28evk: Add missing 'setexpr' commandOtavio Salvador2012-09-24-0/+1
| | | | | | | The environment now uses expressions but we missed the setexpr command was not being include. This patch adds it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: extend default environmentOtavio Salvador2012-09-17-8/+74
| | | | | | | | The environment has been based on mx53loco and m28evk but keeping the possibility to easy change the default console device as Freescale and mainline kernels differ on the device name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: Add USB Ethernet supportFabio Estevam2012-09-04-0/+3
| | | | | | | Add USB Ethernet support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de>
* MX28: mx28evk: Enable SPI DMAOtavio Salvador2012-09-04-0/+1
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx28evk: Remove unneeded 'undef'Fabio Estevam2012-09-01-1/+0
| | | | | | | | There is no need to undef an option that is not enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* MX28: Move "regs-base.h" include after SoC type configurationOtavio Salvador2012-09-01-2/+3
| | | | | | | | | | | | | | | For i.MX233 addition the base registers need to be change so the SoC definition needs to be known before the header include. The following boards has been changed: * apx4devkit * m28evk * mx28evk * sc_sps_1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* ARM: Remove unused stack and irq config definesRob Herring2012-09-01-1/+0
| | | | | | | | | | | CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* mxs: reorganize source directory for easy sharing of code in i.MXS SoCsOtavio Salvador2012-09-01-2/+2
| | | | | | | | | Most code can be shared between i.MX23 and i.MX28 as both are from i.MXS family; this source directory structure makes easy to share code among them. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* mx28evk: Turn on cachesFabio Estevam2012-09-01-2/+0
| | | | | | Turn on data and instruction caches. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* configs: Remove unused symbol CONFIG_DISCOVER_PHYFabio Estevam2012-08-09-1/+0
| | | | | | CONFIG_DISCOVER_PHY is not used anywhere, so remove it from config files. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Add I2C supportFabio Estevam2012-07-11-0/+8
| | | | | | | | | Add I2C support. Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* ARM: mx28: Remove CONFIG_ARCH_CPU_INITFabio Estevam2012-07-07-1/+0
| | | | | | | | | No need to define CONFIG_ARCH_CPU_INIT. All mx28 based boards should use arch_cpu_init(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* mx28evk: fix board config include guardian macro nameOtavio Salvador2012-07-07-3/+3
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: ensure command definition is in alphabetic orderOtavio Salvador2012-07-07-1/+1
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.cTom Rini2012-06-20-1/+0
| | | | | | | | | | Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value different than "> " which is vision2. I have Cc'd the maintainer here as I strongly suspect this is a bug rather than intentional behavior. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Stefano Babic <sbabic@denx.de>
* CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place thereTom Rini2012-06-20-1/+0
| | | | | | | | | We provide a default table of { 9600, 19200, 38400, 57600, 115200 } in <config_fallbacks.h> which mkconfig places after <configs/...h> in the generated config file. This is used when a board has not set its own table. Signed-off-by: Tom Rini <trini@ti.com>
* i.MX28: Implement boot pads sampling and reportingMarek Vasut2012-05-15-0/+1
| | | | | | | | | | | This patch implements code that samples i.MX28 boot pads and reports boot mode accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* mx28evk: add NAND supportLauri Hintsala2012-05-15-0/+10
| | | | | | | | NAND support is not enabled by default because Eval Kit is not delivered with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Marek Vasut <marex@denx.de>
* mx28evk: Allow booting a zImage kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Allow to booting a dt kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow to booting a dt kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX28: Fix initial stack pointer positionMarek Vasut2012-04-16-1/+1
| | | | | | | | | | | | | | | | | | | The patch: m28evk: Use GENERATED_GBL_DATA_SIZE commit 1084606c972ea5f1d89f69bdbd978b867d0ee521 introduced usage of GENERATED_GBL_DATA_SIZE and calculation of initial stack pointer position defived from that. Due to a small typo, the SP position moved to 0x21f80, which is past the SRAM area. This didn't manifest on the real hardware as the SRAM repeats there (address bits in the CPU being ignored). Though this was caught in QEMU, where it crashed the emulator. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: fix build errorAnatolij Gustschin2012-03-30-0/+5
| | | | | | | | | | | | | Fix: drivers/mmc/libmmc.o: In function `mxsmmc_send_cmd': /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:210: undefined reference to `mxs_dma_desc_append' /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:211: undefined reference to `mxs_dma_go' drivers/mmc/libmmc.o: In function `mxsmmc_initialize': /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:306: undefined reference to `mxs_dma_desc_alloc' Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX28: Make use of the bounce bufferMarek Vasut2012-03-29-0/+1
| | | | | | | | This allows i.MX28 MMC host to fully utilize DMA transfers and caches, greatly improving speed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
generated by cgit v1.1 at 2024-11-05 23:04:14 +0000