summaryrefslogtreecommitdiff
path: root/include/configs/k2e_evm.h
Commit message (Collapse)AuthorAgeLines
* keystone2: env: Set mmc as default boot for k2g-evmYan Liu2016-03-15-0/+1
| | | | | | | | | | For k2l, k2e and k2hk, ubi is set to default boot in uboot environment settings; while for k2g, mmc should be the default boot. This patch is to set mmc as default for k2g-evm Signed-off-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* keystone2: env: add env script for booting with an initramfs with firmwareMurali Karicheri2016-03-15-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch updates the env script to include a initramfs with firmware loaded and provided to kernel through second argument of bootz command during boot. Defined DEFAULT_FW_INITRAMFS_BOOT_ENV to have all of the required env variables and use it in evm specific config file. The K2 linux drivers for PCIe and NetCP (1G, 10G) requires serdes firmwares. These requires firmware to be available early through the boot process in some cases to satisfy firmware requests from driver. Hence use a small initramfs to provide the same and update boot env to accommodate this in the boot flow. This method is used when rootfs is nfs and ubifs. This fs contains just lib/firmware folder with all required firmware. When rootfs is on initramfs, then the filesystem has the firmware under lib/firmware and this early initramfs is not required and is not used. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: keystone2: use SPD info to configure K2HK and K2E DDR3Vitaly Andrianov2016-03-14-0/+2
| | | | | | | | | | | | | | This commit replaces hard-coded EMIF and PHY DDR3 configurations for predefined SODIMMs to a calculated configuration. The SODIMM parameters are read from SODIMM's SPD and used to calculated the configuration. The current commit supports calculation for DDR3 with 1600MHz and 1333MHz only. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: k2*_evm: rename skernel binary names to generated file namesNishanth Menon2015-07-27-1/+1
| | | | | | | | | | using http://git.ti.com/keystone-linux/boot-monitor/trees/master as reference (tag K2_BM_15.07) the generated files do not have evm extensions by default. So dont use -evm extension. Reviewed-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* configs: ti_armv7_keystone2: switch to using kernel zImageNishanth Menon2015-07-27-1/+1
| | | | | | | | | | Switch to using zImage instead of uImage. and while at it, start using bootz as default. While at it, get rid of BOOTIMAGE define and start using Linux upstream dtb file names. Reviewed-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* configs: ti_armv7_keystone2: start using armv7_commonNishanth Menon2015-07-27-2/+0
| | | | | | | | | | | | Try to maintain as much commonality by conditionally including stuff in armv7_common as necessary and removing the common defines from keystone2 header. Note: as part of this change, all keystone2 platforms will now start using the generic u-boot prompt instead of the custom prompt. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: rename ks2_evm into ti_armv7_keystone2Nishanth Menon2015-07-27-1/+1
| | | | | | | | | | rename the keystone2 common header into an keystone2 architecture specific header which can then reuse the common ti_armv7 config headers. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-By: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* keystone2: config: update default mtdMichael Scherban2015-07-08-1/+1
| | | | | | | | Because it is possible for the MTD number to change, causing a filesystem mount failure, we should use the volume name instead of the MTD number and let Linux resolve the correct one. Signed-off-by: Mike Scherban <m-scherban@ti.com>
* keystone2: config: align names of images with MCSDKKhoronzhuk, Ivan2014-11-06-2/+3
| | | | | | | | | | The Multicore Software Development Kit (MCSDK) provides foundational software for TI KeyStone II device platforms. It's supposed to be used with uboot, and it's convenient to have the same names for images, so correct environment image names according to the last MCSDK3. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* keystone2: config: restructure handling of default env settingsMurali Karicheri2014-11-06-8/+8
| | | | | | | | | | | | | | | | | | | | Currently to customize env for various ks2 boards, individual variables such as NAME_FS etc are defined and included in the common config.h to define CONFIG_EXTRA_ENV_SETTINGS. This doesn't scale well if a variable is not applicable on a specific board. Using this scheme, we have to define variables with empty value and it's ugly. Instead, to allow board specific customization of default env variable, define a common CONFIG_EXTRA_ENV_KS2_SETTINGS for all common variables and define board specific variables in individual board specific config.h using CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS. Use the common and board specific variables to define CONFIG_EXTRA_ENV_SETTINGS. This way more variables can be added in future for individual boards without affecting the other config.h files. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* board: k2l_evm: add network supportHao Zhang2014-11-05-3/+0
| | | | | | | | | This patch adds network support code and enables keystone_net driver usage for k2l_evm evaluation board. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* net: keystone_serdes: add keystone K2L SoC supportKhoronzhuk, Ivan2014-11-05-3/+0
| | | | | | | | | Keystone2 Lamar SoC uses the same keystone SerDes driver. All Keystone2 EVM boards currently use SerDes driver, so move CONFIG_TI_KEYSTONE_SERDES to common configuration file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* board: k2e_evm: add network supportHao Zhang2014-10-23-0/+8
| | | | | | | | | | This patch adds network support code and enables keystone_net driver usage for k2e_evm evaluation board. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* net: keystone_serdes: add keystone K2E SoC supportKhoronzhuk, Ivan2014-10-23-0/+3
| | | | | | | | | Keystone2 Edison SoC uses the same keystone SerDes driver. This patch adds support for K2E SoCs. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* board: k2e-evm: add board supportHao Zhang2014-07-25-0/+37
This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
generated by cgit v1.1 at 2024-11-05 08:44:12 +0000