arm-boot/u-boot-imx.git - U-boot NXP imx6

	Commit message (Collapse)	Author	Age	Lines
*	ppc: Enable full relocation to RAM	Peter Tyser	2009-10-03	-1/+0
\| \| \| \| \| \| \| \| \| \| \| \| \|	The following changes allow U-Boot to fully relocate from flash to RAM: - Remove linker scripts' .fixup sections from the .text section - Add -mrelocatable to PLATFORM_RELFLAGS for all boards - Define CONFIG_RELOC_FIXUP_WORKS for all boards Previously, U-Boot would partially relocate, but statically initialized pointers needed to be manually relocated. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
*	ppc/85xx: Fix LCRR_CLKDIV defines	Kumar Gala	2009-09-24	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	For some reason the CLKDIV field varies between SoC in how it interprets the bit values. All 83xx and early (e500v1) PQ3 devices support: clk/2: CLKDIV = 2 clk/4: CLKDIV = 4 clk/8: CLKDIV = 8 Newer PQ3 (e500v2) and MPC86xx support: clk/4: CLKDIV = 2 clk/8: CLKDIV = 4 clk/16: CLKDIV = 8 Ensure that the MPC86xx and MPC85xx still get the same behavior and make the defines reflect their logical view (not the value of the field). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Peter Tyser <ptyser@xes-inc.com>
*	xes: Increase CONFIG_SYS_BOOTM_LEN to 16MB	Peter Tyser	2009-07-22	-0/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB when using the bootm command. Note that recent Linux kernels for the 85xx and 86xx map greater than 16MB of memory on bootup, but we use 16MB to maintain compatibility with older Linux kernels for now. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
*	xpedite5200,5370: Use buffered NOR flash writes	Peter Tyser	2009-07-22	-0/+1
\| \| \| \| \| \| \| \|	Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly improve NOR flash write speeds Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
*	i2c: Remove deprecated individual i2c commands	Peter Tyser	2009-06-12	-1/+0
\| \| \| \| \| \| \| \| \| \| \| \| \|	The following individual I2C commands have been removed: imd, imm, inm, imw, icrc32, iprobe, iloop, isdram. The functionality of the individual commands is still available via the 'i2c' command. This change only has an impact on those boards which did not have CONFIG_I2C_CMD_TREE defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
*	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	Mike Frysinger	2009-02-18	-1/+1
\| \| \| \| \| \| \| \|	The CONFIG_CMD_ENV option controls enablement of the `saveenv` command rather than a generic "env" command, or anything else related to the environment. So, let's make sure the define is named accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
*	XPedite5200 board support cleanup	Peter Tyser	2008-12-29	-0/+546
	Signed-off-by: Peter Tyser <ptyser@xes-inc.com>