summaryrefslogtreecommitdiff
path: root/include/configs/MPC8641HPCN.h
Commit message (Collapse)AuthorAgeLines
...
* mpc8641: Support 36-bit physical addressingBecky Bruce2008-11-10-36/+128
| | | | | | | | | | | | | | | | | | This patch creates a memory map with all the devices in 36-bit physical space, in addition to the 32-bit map. The CCSR relocation is moved (again, sorry) to allow for the physical address to be 36 bits - this requires translation to be enabled. With 36-bit physical addressing enabled, we are no longer running with VA=PA translations. This means we have to distinguish between the two in the config file. The existing region name is used to indicate the virtual address, and a _PHYS variety is created to represent the physical address. Large physical addressing is not enabled by default. Set CONFIG_PHYS_64BIT in the config file to turn this on. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: Change 32-bit memory mapBecky Bruce2008-11-10-37/+39
| | | | | | | | | | | | | | | | | | | | | | The memory map on the 8641hpcn is modified to look more like the 85xx boards; this is a step towards a more standardized layout going forward. As part of this change, we now relocate the flash. The regions for some of the mappings were far larger than they needed to be. I have reduced the mappings to match the actual sizes supported by the hardware. In addition I have removed the comments at the head of the BAT blocks in the config file, rather than updating them. These get horribly out of date, and it's a simple matter to look at the defines to see what they are set to since everything is right here in the same file. Documentation has been changed to reflect the new map, as this change is user visible, and affects the OS which runs post-uboot. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLYBecky Bruce2008-11-10-1/+11
| | | | | | | | | | | We define CONFIG_MONITOR_BASE_EARLY to define the initial location of the bootpage in flash. Use this to create an early mapping definition for the FLASH, and change the early_bats code to use this. This change facilitates the relocation of the flash since the early mappings are no longer tied to the final location of the flash. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: make DIAG_ADDR == FLASH_BASEBecky Bruce2008-11-10-1/+1
| | | | | | Currently, that's what it is, but it's hardcoded. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: Drop imaginary second flash bank, map 8MBBecky Bruce2008-11-10-27/+14
| | | | | | | | | There's a lot of setup and foo for the second flash bank. The problem is, this board doesn't actually have one. Clean this up. Also, the flash is 8M in size. Get rid of the confusing aliased overmapping, and just map 8M. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: only define CONFIG_ENV_SIZE onceBecky Bruce2008-11-10-2/+1
| | | | | | | | It's currently defined twice inside in an if/else block, but both halves set the same value. Move the define outside the if. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: Remove extra "0" from BR2 defineBecky Bruce2008-11-10-1/+1
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* powerpc: change 86xx SMP boot methodBecky Bruce2008-11-04-0/+7
| | | | | | | | | We put the bootpg for the secondary cpus into memory and use BPTR to get to it. This is a step towards converting to the ePAPR boot methodology. Also, the code is written to deal properly with more than 4GB of RAM. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 8641HPCN: Config file cleanupBecky Bruce2008-11-03-5/+15
| | | | | | | | | | There are several items in the config file that were hardcoded but that should really be based on other config options, since the regions are contiguous and depend on being so. This cleans that up a bit. Also, add BR_PHYS_ADDR() macro to convert addresses into the proper format for BR registers. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI buildBecky Bruce2008-11-03-9/+28
| | | | | | | | | | You can't actually have both, and with some coming changes to change the memory map for the board and support 36-bit physical, we need the extra BAT that is being consumed by having both. I also make non-PCI configs build cleanly, for the sake of sanity. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* mpc8641: Stop supporting non-PCI_PNP configsBecky Bruce2008-11-03-6/+0
| | | | | | | We don't actually ever do this, remove the code so we can stop maintaining it. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: remove the unused definitionDave Liu2008-10-30-11/+0
| | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* 86xx: Convert all fsl_pci_init users to new APIsKumar Gala2008-10-24-5/+0
| | | | | | | | | | | | Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Enable 64-bit PCI resources on all Freescale boardsKumar Gala2008-10-24-0/+1
| | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-166/+166
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV macros to CONFIG_ENVJean-Christophe PLAGNIOL-VILLARD2008-09-10-5/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASHJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHEREJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* cmd_mac: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | | | | finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM start in commit ad8f8687b78c3e917b173f038926695383c55555 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* FSL DDR: Convert MPC8641HPCN to new DDR code.Kumar Gala2008-08-27-53/+50
| | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* drivers/mtd: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-13-1/+1
| | | | | | rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Update Freescale sys_eeprom.c to handle CCID formatsTimur Tabi2008-07-15-4/+4
| | | | | | | | | | | | | Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The NXID format replaces the older CCID format, but it's important to support both since most boards out there still use the CCID format. This change is in preparation for using one file to handle both formats. This will also unify EEPROM support for all Freescale 85xx and 86xx boards. Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR instead of ID_EEPROM_ADDR. Signed-off-by: Timur Tabi <timur@freescale.com>
* Merge commit 'wd/master'Jon Loeliger2008-06-06-126/+127
|\
| * PPC: Create and use CONFIG_HIGH_BATSBecky Bruce2008-06-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
| * Big white-space cleanup.Wolfgang Denk2008-05-21-126/+126
| | | | | | | | | | | | | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | mpc86xx: Removed unused and unconfigured memory test code.Jon Loeliger2008-05-19-1/+0
|/ | | | | | Besides, other common code exists. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Add reginfo commandBecky Bruce2008-01-24-0/+1
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: Support new law setup method and convert mpc8641Becky Bruce2008-01-24-0/+1
| | | | | | | | Adds the support code in cpu/mpc86xx for the new law setup code recently created fsl_law.c, and changes the MPC8641HPCN config to use this code. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: enable command-line editingTimur Tabi2008-01-17-0/+1
| | | | | | Enable command-line editing for all MPC86xx boards. Signed-off-by: Timur Tabi <timur@freescale.com>
* FSL: Convert board/freescale/common/Makefile to use CONFIG_Jon Loeliger2008-01-16-0/+3
| | | | | | | | | | | | | | | | Convert the board/freescale/common/Makefile to use CONFIG_* options to select which files to conditionally compile into the board/freescale/common library rather than conditionally compiling entire files. Now handles:: CONFIG_FSL_PIXIS CONFIG_FSL_DIU_FB CONFIG_PQ_MDS_PIB CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Remove cache config from configs.hKumar Gala2008-01-09-7/+0
| | | | | | | | | Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Don't slam #undef DEBUG in the 8641HPCN config file.Jon Loeliger2008-01-03-1/+0
| | | | | | | Doing so prevents it from being individually set and useful in other files. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Convert MPC8641HPCN to use libfdt.Jon Loeliger2008-01-03-12/+9
| | | | | | | | | Assumes the presence of the aliases node in the DTS to locate the ethernet, pci and serial nodes for fixups. Use consistent fdtaddr and fdtfile in environment variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Unify pixis_reset altbank across board familiesJason Jin2007-11-07-0/+1
| | | | | | | | Basically, refactor the CFG_PIXIS_VBOOT_MASK values into the separate board config files. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fix USB support issue for MPC8641HPCN board.Zhang Wei2007-11-03-0/+2
| | | | | | | | | | | The configuration file has already enabled USB, but it missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB on MPC8641HPCN can not work because of the wrong USB register endian. And add the USB command to U-Boot commands list. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
* support board vendor-common makefilesKim Phillips2007-08-29-0/+1
| | | | | | | | | | | | | | | | | | if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* fdt: remove unused OF_FLAT_TREE_MAX_SIZE referencesKim Phillips2007-08-29-3/+0
| | | | | | and make some minor corrections to the FDT part of the README. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Add CONFIG_HAS_ETH0 to all boards with TSECAndy Fleming2007-08-16-0/+1
| | | | | | | | | The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Define tsec flag values in config filesAndy Fleming2007-08-16-0/+4
| | | | | | | | | | The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-68/+99
|\
| * Configurations for ATI video card BIOS emulatorJason Jin2007-08-06-3/+25
| | | | | | | | | | | | | | | | This patch add definition of the BIOS emulator and the ATI framebuffer driver for MPC8641HPCN board. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
| * Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.Ed Swarthout2007-08-06-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the PCI/PCI-Express driver and initialization code that was in the MPC8641HPCN port has now been moved into the common drivers/fsl_pci_init.c. In a subsequent patch, this will be utilized by the 85xx ports as well. Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. Also enable the second PCI-Express controller on 8641 by getting its BATS and CFG_ setup right. Fixed a u16 vendor compiler warning in AHCI driver too. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.Jon Loeliger2007-07-10-0/+9
| | | | | | | | | | | | | | | | | | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.Jon Loeliger2007-07-04-36/+22
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-07-03-8/+8
| |\
| | * Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECxKim Phillips2007-05-17-8/+8
| | | | | | | | | | | | | | | | | | | | | For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc8641 image size cleanupEd Swarthout2007-06-05-1/+9
| |/ | | | | | | | | | | | | | | | | | | | | e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Add USB PCI-OHCI, USB keyboard and event poll support to theZhang Wei2007-06-06-0/+13
|/ | | | | | MPC8641HPCN board config file. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
* Add flash cmd function to 8641HPCN rambootJason Jin2007-03-22-13/+3
| | | | | | | Also fixes some commmand for 8641 HPCN ramboot case. Signed-off-by: Jason Jin <jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Converted all 85xx boards to use a common FSL I2C driver.Jon Loeliger2006-10-20-2/+3
| | | | | | | | Introduced COFIG_FSL_I2C to select the common FSL I2C driver. And removed hard i2c path from a few u-boot.lds scipts too. Minor whitespace cleanups along the way. Signed-off-by: Jon Loeliger <jdl@freescale.com>
generated by cgit v1.1 at 2024-11-19 12:34:11 +0000