summaryrefslogtreecommitdiff
path: root/include/config_fsl_chain_trust.h
Commit message (Collapse)AuthorAgeLines
* SECURE_BOOT: Use default bootargsSaksham Jain2016-03-29-4/+10
| | | | | | | | | | For secure boot, currently we were using fixed bootargs for all SoCs. This is not needed and we can use the bootargs which are used in non-secure boot. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch3: Copy Bootscript and header from NOR to DDRSaksham Jain2016-03-29-4/+7
| | | | | | | | | | | | | To unify steps for secure boot for xip (eg. NOR) and non-xip memories (eg. NAND, SD), bootscipts and its header are copied to main memory. Validation and execution are performed from there. For other ARM Platforms (ls1043 and ls1020), to avoid disruption of existing users, this copy step is not used for NOR boot. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: split the secure boot functionality in two partsAneesh Bansal2016-01-27-0/+101
There are two phases in Secure Boot 1. ISBC: In BootROM, validate the BootLoader (U-Boot). 2. ESBC: In U-Boot, continuing the Chain of Trust by validating and booting LINUX. For ESBC phase, there is no difference in SoC's based on ARM or PowerPC cores. But the exit conditions after ISBC phase i.e. entry conditions for U-Boot are different for ARM and PowerPC. PowerPC: If Secure Boot is executed, a separate U-Boot target is required which must be compiled with a diffrent Text Base as compared to Non-Secure Boot. There are some LAW and TLB settings which are required specifically for Secure Boot scenario. ARM: ARM based SoC's have a fixed memory map and exit conditions from BootROM are same irrespective of boot mode (Secure or Non-Secure). Thus the current Secure Boot functionlity has been split into two parts: CONFIG_CHAIN_OF_TRUST This will have the following functionality as part of U-Boot: 1. Enable commands like esbc_validate, esbc_halt 2. Change the environment settings based on bootmode, determined at run time: - If bootmode is non-secure, no change - If bootmode is secure, set the following: - bootdelay = 0 (Don't give boot prompt) - bootcmd = Validate and execute the bootscript. CONFIG_SECURE_BOOT This is defined only for creating a different compile time target for secure boot. Traditionally, both these functionalities were defined under CONFIG_SECURE_BOOT. This patch is aimed at removing the requirement for a separate Secure Boot target for ARM based SoC's. CONFIG_CHAIN_OF_TRUST will be defined and boot mode will be determine at run time. Another Security Requirement for running CHAIN_OF_TRUST is that U-Boot environemnt must not be picked from flash/external memory. This cannot be done based on bootmode at run time in current U-Boot architecture. Once this dependency is resolved, no separate SECURE_BOOT target will be required for ARM based SoC's. Currently, the only code under CONFIG_SECURE_BOOT for ARM SoC's is defining CONFIG_ENV_IS_NOWHERE Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>