summaryrefslogtreecommitdiff
path: root/include/config_distro_bootcmd.h
Commit message (Collapse)AuthorAgeLines
* distro bootcmd: enumerate PCI before network operationsStephen Warren2016-01-28-0/+12
| | | | | | | | | The PCI bus must be enumerated before PCI devices, such as Ethernet devices, are known to U-Boot. Enhance the distro boot commands to perform PCI enumeration when needed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* distro bootcmd: make net boot only optionally start USBStephen Warren2016-01-28-5/+6
| | | | | | | | | | | | | | | | | | | Currently, the distro boot commands always enumerate USB devices before performing network operations. However, depending on the board and end- user configuration, network devices may not be attached to USB, and so enumerating USB may not be necessary. Enhance the scripts to make this step optional, so that the user can decrease boot time if they don't need USB. This change is performed by moving the "usb start" invocation into a standalone variable. If the user desires, they can replace that variable's value with some no-op command such as "true" instead. Booting from a USB storage device always needs to enumerate USB devices, so this action is still hard-coded. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* distro_bootcmd: Add support for booting from ubifsRoy Spliet2015-10-24-0/+19
| | | | | | | | | Under the assumptions of having a UBI volume called boot, containing a ubifs filesystem. Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* config_distro_bootcmd.h: Use a private variable for bootpartSjoerd Simons2015-10-22-7/+11
| | | | | | | | | | | | | | Hush has an oddity where using ${var} causes var to resolved in the the global address space (iotw the environment) first and only afterwards will the local variable space be searched. This causes odd side-effects when iterating over the boot partitions using ${bootpart} if the environment also has a bootpart variable (e.g. for the various TI boards). Fix this by using the hopefully more unique ${distro_bootpart} instead of ${bootpart}. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* config_distro_bootcmd.h: Add shared block definition for the host interfaceSjoerd Simons2015-04-19-0/+13
| | | | | | | | | Define the common shared block environment for the host interface in preperation for the sandbox build to use config_distro_bootcmd. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
* config_distro_bootcmd.h: Prefer booting from bootable paritionsSjoerd Simons2015-03-25-1/+2
| | | | | | | | | List bootable partitions and only scan those for bootable files, falling back to partition 1 if there are no bootable partitions Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* config_distro_bootcmd.h: add note on error handlingStephen Warren2015-03-13-0/+16
| | | | | | | | | | | This should make it more clear why there appear to be C pre-processor symbols in the file that contain mixed case. They're really error messages. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* config_distro_bootcmd.h: Enable CONFIG_CMD_PARTHans de Goede2015-02-16-0/+4
| | | | | | | | | | The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be defined, as the default bootcmd now uses the "part" command. This fixes sunxi boards not booting with v2015.04-rc1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* distro_bootcmd: read DHCP boot script name from a variableStephen Warren2015-01-30-1/+2
| | | | | | | | | Modify $bootcmd_dhcp to read the downloaded script filename from an environment variable rather than hard-coding it. This allows the user (or another script) to select a different script name if they want, without editing the whole value of $bootcmd_dhcp. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* distro_distro_bootcmd: use CONFIG_BOOTCOMMAND instead of setting bootcmd=Sjoerd Simons2015-01-29-1/+5
| | | | | | | | | | | | | | | Move the bootcmd commands into a seperate distro_bootcmd environment variable. Allowing a user to easily launch the distro boot sequence if the default bootcmd did not default to distro boot commands. Also set CONFIG_BOOTCOMMAND to "run distro_bootcmd" if it hasn't been configured yet rather then putting it directly in the environment. This allows boards to make the distro boot commands available without necessarily default to them or to use them as a fallback after running some board specific commands instead. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* config_distro_bootcmd: Scan all partitions for boot filesSjoerd Simons2015-01-29-3/+11
| | | | | | | | | | | Not all devices use the convention that the boot scripts are on the first partition. For example on chromebooks it seems common for the first two partitions to be ChromeOS kernel partitions. So instead of just the first partition scan all partitions on a device with a filesystem u-boot can recognize. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
* config_distro_bootcmd.h: Remove unnecessary magic to avoid repeated USB scansHans de Goede2015-01-18-10/+2
| | | | | | | | Now that "usb start" will only start usb if not already started, we can simply call "usb start" whenever we (may) need access to usb devices, and it will only actually scan the bus at the first call. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* config_distro_bootcmd: Run 'scsi scan' before trying scsi disksHans de Goede2014-09-24-2/+15
| | | | | | | | | | Scsi disks need to be probed before we try to access them, otherwise all accesses fail with: ** Bad device size - scsi 0 **. Reported-by: Karsten Merker <merker@debian.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Karsten Merker <merker@debian.org>
* config: introduce a generic $bootcmdDennis Gilmore2014-08-09-0/+197
This generic $bootcmd, and associated support macros, automatically searches a defined set of storage devices (or network protocols) for an extlinux configuration file or U-Boot boot script in various standardized locations. Distros that install such a boot config file/script in those standard locations will get easy-to-set-up booting on HW that enables this generic $bootcmd. Boards can define the set of devices from which boot is attempted, and the order in which they are attempted. Users may later customize this set/order by edting $boot_targets. Users may interrupt the boot process and boot from a specific device simply by executing e.g.: $ run bootcmd_mmc1 or: $ run bootcmd_pxe This patch was originally written by Dennis Gilmore based on Tegra and rpi_b boot scripts. I have made the following modifications since then: * Boards must define the BOOT_TARGET_DEVICES macro in order to specify the set of devices (and order) from which to attempt boot. If needed, we can define a default directly in config_distro_bootcmd.h. * Removed $env_import and related variables; nothing used them, and I think it's better for boards to pre-load an environment customization file using CONFIG_PREBOOT if they need. * Renamed a bunch of variables to suit my whims:-) Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-07 08:19:50 +0000