summaryrefslogtreecommitdiff
path: root/include/asm-ppc
Commit message (Collapse)AuthorAgeLines
* mpc8[56]xx: Put localbus clock in sysinfo and gdTrent Piepho2008-12-19-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* mpc8xxx: LCRR[CLKDIV] is sometimes five bitsTrent Piepho2008-12-19-1/+4
| | | | | | | | | | | | | | On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits instead of four. In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It should be safe as the fifth bit was defined as reserved and set to 0. Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
* ppc: Use addrmap in virt_to_phys and map_physmem.Kumar Gala2008-12-19-0/+12
| | | | | | | If we have addr map support enabled use the mapping functions to implement virt_to_phys() and map_physmem(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support to populate addr map based on TLB settingsKumar Gala2008-12-19-0/+3
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: fix io.h build warning with CONFIG_PHYS_64BITBecky Bruce2008-12-16-1/+1
| | | | | | | | Casting a pointer to a phys_addr_t when it's an unsigned long long on a 32-bit system without first casting to a non-pointer type generates a compiler warning. Fix this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* Introduce virt_to_phys()Kumar Gala2008-12-15-0/+5
| | | | | | | | | | | | virt_to_phys() returns the physical address given a virtual. In most cases this will be just the input value as the vast majority of systems run in a 1:1 mode. However in systems that are not running this way it should report the physical address or ~0 if no mapping exists for the given virtual address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL: Moved BR_PHYS_ADDR for localbus to common headerKumar Gala2008-12-04-0/+8
| | | | | | | | | | | The BR_PHYS_ADDR macro is useful on all machines that have local bus which is pretty much all 83xx/85xx/86xx chips. Additionally most 85xx & 86xx will need it if they want to support 36-bit physical addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Andy Fleming <afleming@freescale.com>
* 85xx: Add PORDEVSR_PCI1 definePeter Tyser2008-12-04-2/+1
| | | | | | | | | Add define used to determine if PCI1 interface is in PCI or PCIX mode. Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRsDave Mitchell2008-11-21-0/+75
| | | | | | | | | | | Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and L2 cache DCRs from ppc440.h to this new header. Also converted these DCR defines from lowercase to uppercase and modified referencing modules to use them. Signed-off-by: Dave Mitchell <dmitch71@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Make Freescale local bus registers available for both 83xx and 85xx.Haiying Wang2008-10-29-50/+138
| | | | | | | | | | | | | - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it can be shared by both 83xx and 85xx - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards files which use lbus83xx_t. - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that 85xx can share them. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* 85xx: Update MPC85xx_PORDEVSR_IO_SEL maskPeter Tyser2008-10-27-1/+1
| | | | | | | | | The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx processors have a 3-bit wide IO_SEL field but have the most significant bit is wired to 0 so this change should not affect them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* 85xx: Add basic e500mc core supportKumar Gala2008-10-24-0/+2
| | | | | | | | | | | Introduce CONFIG_E500MC to deal with the minor differences between e500v2 and e500mc. * Certain fields of HID0/1 don't exist anymore on e500mc * Cache line size is 64-bytes on e500mc * reset value of PIR is different Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: serdes: add forgotten shifts for rfcksAnton Vorontsov2008-10-21-5/+5
| | | | | | | | | | The rfcks should be shifted by 28 bits left. We didn't notice the bug because we were using only 100MHz clocks (for which rfcks == 0). Though, for SGMII we'll need 125MHz clocks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2008-10-21-0/+31
|\
| * ppc4xx: Correctly setup ranges property in ebc nodeStefan Roese2008-10-21-0/+31
| | | | | | | | | | | | | | | | Previously only the NOR flash mapping was written into the ranges property of the ebc node. This patch now writes all enabled chip select areas into the ranges property. Signed-off-by: Stefan Roese <sr@denx.de>
* | 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFGTimur Tabi2008-10-21-0/+1
|/ | | | | | | | | Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot to add a comment that the correct value disagrees with the 8544 reference manual. The changelog for that commit is also wrong, as it says "bit 28" when it should be "bit 24". Signed-off-by: Timur Tabi <timur@freescale.com>
* Merge 'next' branchWolfgang Denk2008-10-18-162/+265
|\ | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Pass dimm parameters to populate populate controller optionsHaiying Wang2008-10-18-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| * Make DDR interleaving mode work correctlyHaiying Wang2008-10-18-0/+12
| | | | | | | | | | | | | | | | | | | | Fix some bugs: 1. Correctly set intlv_ctl in cs_config. 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. 3. Set base_address and total memory for each ddr controller in memory controller interleaving mode. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| * 85xx: Export invalidate_{i,d}cache and add flush_dcacheKumar Gala2008-10-18-0/+1
| | | | | | | | | | | | | | | | Added the ability for C code to invalidate the i/d-cache's and to flush the d-cache. This allows us to more efficient change mappings from cache-able to cache-inhibited. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-162/+162
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Adds two more ethernet interface to 83xxrichardretanubun2008-10-18-0/+6
| | | | | | | | | | | | | | | | | | Added as a convenience for other platforms that uses MPC8360 (has 8 UCC). Six eth interface is chosen because the platform I am using combines UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth. Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | ppc4xx: PPC44x MQ initializationYuri Tikhonov2008-10-17-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC values. This fixes the occasional 440SPe hard locking issues when the 440SPe's dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver). Previously the appropriate initialization had been made in Linux, by the ppc440spe ADMA driver, which is wrong because modifying the MQ configuration registers after normal operation has begun is not supported and could have unpredictable results. Comment from Stefan: This patch doesn't change the resulting value of the MQ registers. It explicitly sets/clears all bits to the desired state which better documents the resulting register value instead of relying on pre-set default values. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | 85xx: Using proper I2C source clock divider for MPC8544Kumar Gala2008-10-17-1/+1
|/ | | | | | | | | | The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being bit 26, instead it should be bit 28. This caused in incorrect interpretation of the i2c_clk which is the same as the SEC clk on MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported in PORDEVSR2. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix the incorrect DDR clk freq reporting on 8536DSJason Jin2008-10-07-0/+7
| | | | | | | | | On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111), The display is still sync mode DDR freq. This patch try to fix this. The display DDR freq is now the actual freq in both sync and async mode. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* ppc4xx: Move ppc4xx specific prototypes to ppc4xx headerStefan Roese2008-09-08-0/+14
| | | | | | | This patch moves some 4xx specific prototypes out of include common.h to a ppc4xx specific header. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-09-08-0/+1
|\
| * Allow console input to be disabledMark Jackson2008-09-06-0/+1
| | | | | | | | | | | | | | | | | | Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE. When CONFIG_DISABLE_CONSOLE is defined, setting GD_FLG_DISABLE_CONSOLE disables all console input and output. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* | ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routinesAdam Graham2008-09-05-1/+2
|/ | | | | Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* mpc83xx: Store and display Arbiter Event Register valuesNick Spence2008-09-03-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Record the Arbiter Event Register values and optionally display them. The Arbiter Event Register can record the type and effective address of an arbiter error, even through an HRESET. This patch stores the values in the global data structure. Display of the Arbiter Event registers immediately after the RSR value can be enabled with defines. The Arbiter values will only be displayed if an arbiter event has occured since the last Power On Reset, and either of the following defines exist: #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and and type register values #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter event register values Address Only transactions are one of the trapped events that can register as an arbiter event. They occur with some cache manipulation instructions if the HID0_ABE (Address Broadcast Enable) is set and the memory region has the MEMORY_COHERENCE WIMG bit set. Setting: #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address only events, so that it can still capture other real problems. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc85xx: Add support for the MPC8536Kumar Gala2008-08-27-3/+16
| | | | | | | | | | | The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
* FSL DDR: Add e500 TLB helper for DDR codeKumar Gala2008-08-27-0/+1
| | | | | | | Provide a helper function that board code can call to map TLBs when setting up DDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.Kumar Gala2008-08-27-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The main purpose of this rewrite it to be able to share the same initialization code on all FSL PowerPC products that have DDR controllers. (83xx, 85xx, 86xx). The code is broken up into the following steps: GET_SPD COMPUTE_DIMM_PARMS COMPUTE_COMMON_PARMS GATHER_OPTS ASSIGN_ADDRESSES COMPUTE_REGS PROGRAM_REGS This allows us to share more code an easily allow for board specific code overrides. Additionally this code base adds support for >4G of DDR and provides a foundation for supporting interleaving on processors with more than one controller. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL DDR: Provide a generic set_ddr_laws()Kumar Gala2008-08-27-0/+1
| | | | | | | Provide a helper function that will setup the last available LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family ↵Nick Spence2008-08-25-1/+3
| | | | | | | | | | devices This patch adds elements to the 83xx sysconf structure and #define values that are used by mpc83xx family devices. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,Prodyut Hazarika2008-08-21-17/+33
| | | | | | | | | | | | | | | PPC405EX and PPC460EX/GT/SX - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX processors - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared across processors (405 and 440/460) - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX processors - Add register bit definitions for Memory Queue Configuration registers Signed-off-by: Prodyut Hazarika <phazarika@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Fix merge problemsStefan Roese2008-08-06-0/+12
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 supportStefan Roese2008-07-18-11/+11
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: CPU PPC440x5 on Virtex5 FXRicardo Ribalda Delgado2008-07-18-0/+76
| | | | | | | | | | | -This patchs gives support for the embbedded ppc440 on the Virtex5 FPGAs -interrupts.c divided in uic.c and interrupts.c -xilinx_irq.c for xilinx interrupt controller -Include modifications propossed by Stefan Roese Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-07-17-0/+29
|\
| * 85xx: Add some L1/L2 SPR register definitionsKumar Gala2008-07-14-0/+20
| | | | | | | | | | | | Add new L1/L2 SPRs related to e500mc cache config and control. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * fdt: add crypto node handling for MPC8{3, 5}xxE processorsKim Phillips2008-07-14-0/+9
| | | | | | | | | | | | | | | | Delete the crypto node if not on an E-processor. If on 8360 or 834x family, check rev and up-rev crypto node (to SEC rev. 2.4 property values) if on an 'EA' processor, e.g. MPC8349EA. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | ppc4xx: Add 460SX UIC definesStefan Roese2008-07-11-1/+21
| | | | | | | | | | | | Only the really needed ones are added (cascading and EMAC/MAL). Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Rework 440GX UIC handlingStefan Roese2008-07-11-46/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the 440GX interrupt handling so that the common 4xx code can be used. The 440GX is an exception to all other 4xx variants by having the cascading interrupt vectors not on UIC0 but on a special UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt handling is simpler without any 440GX special cases. Also some additional cleanup to cpu/ppc4xx/interrupt.c is done. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate PPC4xx UIC definesStefan Roese2008-07-11-412/+236
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This 2nd patch now removes all UIC mask bit definition. They should be generated from the vectors by using the UIC_MASK() macro from now on. This way only the vectors need to get defined for new PPC's. Also only the really used interrupt vectors are now defined. This makes definitions for new PPC versions easier and less error prone. Another part of this patch is that the 4xx emac driver got a little cleanup, since now the usage of the interrupts is clearer. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate PPC4xx UIC definesStefan Roese2008-07-11-28/+23
| | | | | | | | | | | | | | | | | | This patch is the first step to consolidate the UIC related defines in the 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next steps. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate PPC4xx EBC definesStefan Roese2008-07-11-0/+156
| | | | | | | | | | | | | | | | | | | | | | This patch removes all EBC related defines from the PPC4xx headers ppc405.h and ppc440.h and introduces a new header include/asm-ppc/ppc4xx-ebc.h with all those defines. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM ControllerGrant Erickson2008-07-11-46/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM controller registers (MODT and INITPLR) used by the PowerPC405EX(r). The MMODE and MEMODE registers are unified with their peer values used for the INITPLR MR and EMR registers, respectively. Finally, a spelling typo is correct (MANUEL to MANUAL). With these mnemonics in place, the CFG_SDRAM0_* magic numbers for Kilauea are replaced by equivalent mnemonics to make it easier to compare and contrast other 405EX(r)-based boards (e.g. during board bring-up). Finally, unified the SDRAM controller register dump routine such that it can be used across all processor variants that utilize the IBM DDR2 SDRAM controller core. It produces output of the form: PPC4xx IBM DDR2 Register Dump: ... SDRAM_MB0CF[40] = 0x00006701 ... which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included since it is not uncommon that the DCR values in header files get mixed up and it helps to validate, at a glance, they match what is printed in the user manual. Tested on: AMCC Kilauea/Haleakala: - NFS Linux Boot: PASSED - NAND Linux Boot: PASSED Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field MnemonicsGrant Erickson2008-07-11-0/+52
| | | | | | | | | | | | | | | | | | Add additional DDR2 SDRAM memory controller DCR mneomnics, condition revision ID DCR based on 405EX, and add field mnemonics for bus error status and ECC error status registers. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)Grant Erickson2008-07-11-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in the 405EX(r), SDRAM_MCSTAT has a different DCR value. Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF which causes SDRAM initialization to periodically fail since it can prematurely indicate SDRAM ready status. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-11-01 14:11:22 +0000