summaryrefslogtreecommitdiff
path: root/fs
Commit message (Collapse)AuthorAgeLines
* mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_dataScott Wood2016-06-03-1/+1
| | | | | | | | | These functions are part of the Linux 4.6 sync. They are being added before the main sync patch in order to make it easier to address the issue across all NAND drivers (many/most of which do not closely track their Linux counterparts) separately from other merge issues. Signed-off-by: Scott Wood <oss@buserror.net>
* nand: Embed mtd_info in struct nand_chipScott Wood2016-06-03-8/+4
| | | | | | | | | | | | nand_info[] is now an array of pointers, with the actual mtd_info instance embedded in struct nand_chip. This is in preparation for syncing the NAND code with Linux 4.6, which makes the same change to struct nand_chip. It's in a separate commit due to the large amount of changes required to accommodate the change to nand_info[]. Signed-off-by: Scott Wood <oss@buserror.net>
* mtd: nand: Remove nand_info_t typedefScott Wood2016-06-03-12/+14
| | | | | | | This typedef serves no purpose other than causing confusion with struct nand_chip. Signed-off-by: Scott Wood <oss@buserror.net>
* dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSISimon Glass2016-05-17-1/+1
| | | | | | | | This option currently enables both the command and the SCSI functionality. Rename the existing option to CONFIG_SCSI since most of the code relates to the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
* fs: ext4: fix symlink read functionRonald Zachariah2016-05-02-1/+1
| | | | | | | | | | The function ext4fs_read_symlink was unable to handle a symlink which had target name of exactly 60 characters. Signed-off-by: Ronald Zachariah <rozachar@cisco.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Rini <trini@konsulko.com>
* ubifs: fix memory corruption in super.cHeiko Schocher2016-04-22-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | In list "super_blocks" ubifs collects allocated super_block structs. U-Boot frees on unmount the allocated struct, so the pointer stored in this list is free after the umount. On a new ubifs mount, the new allocated super_block struct get inserted into the super_blocks list ... which contains now a freed pointer, and the list_add_tail() corrupts the freed memory ... 2 solutions are possible: - remove the super_block from the super_blocks list on umount - as U-Boot does not use the super_blocks list ... remove it complete for U-Boot. Both solutions should not introduce problems for porting to newer linux version, so this patch removes the unused super_blocks list, as it saves code size and execution time. Signed-off-by: Heiko Schocher <hs@denx.de>
* jffs2: Fix set but not used warningTom Rini2016-04-01-1/+2
| | | | | | | We only use 'ofs' in jffs2_sum_scan_sumnode when debugging as it's part of a dbg_summary call. Mark this as __maybe_unused. Signed-off-by: Tom Rini <trini@konsulko.com>
* Fix spelling of "supported/unsupported".Vagrant Cascadian2016-03-22-1/+1
| | | | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
* dm: block: Adjust device calls to go through helpers functionSimon Glass2016-03-14-37/+24
| | | | | | | | | | | | To ease conversion to driver model, add helper functions which deal with calling each block device method. With driver model we can reimplement these functions with the same arguments. Use inline functions to avoid increasing code size on some boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: block: Rename device number member dev to devnumSimon Glass2016-03-14-2/+2
| | | | | | | | | This is a device number, and we want to use 'dev' to mean a driver model device. Rename the member. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: part: Rename some partition functionsSimon Glass2016-03-14-1/+1
| | | | | | | | Rename three partition functions so that they start with part_. This makes it clear what they relate to. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: blk: Rename get_device_and_partition()Simon Glass2016-03-14-2/+2
| | | | | | | | | | Rename this function to blk_get_device_part_str(). This is a better name because it makes it clear that the function returns a block device and parses a string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-77/+66
| | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada2016-01-25-0/+2
| | | | | | | | | | | | | | | | BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-24/+3
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* ext4_common.c: Clean up failure cases in alloc_triple_indirect_blockTom Rini2016-01-13-5/+10
| | | | | | | | | | As noted by Coverity, when we have an error in alloc_triple_indirect_block we will leak ti_pbuff_start_addr as it's not being freed. Further inspection here shows that we could also leak ti_cbuff_start_addr in one corner case so free that as well. Reported-by: Coverity (CID 131205, 131206) Signed-off-by: Tom Rini <trini@konsulko.com>
* block: pass block dev not num to read/write/erase()Stephen Warren2016-01-13-46/+53
| | | | | | | | | | | This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* fs: handle the fileaddr variable in the same way as in the network caseDavid Müller (ELSOFT AG)2016-01-08-0/+1
| | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
* fs: ext4: Prevent infinite loop in ext4fs_iterate_dirThomas Fitzsimmons2015-11-23-0/+5
| | | | | | | | | | | | | | | | | | | If the ext3 journal gets out of sync with what is written on disk, for example because of an unexpected power cut, ext4fs_read_file can return an all-zero directory entry. In that case, ext4fs_iterate_dir would infinite loop. This patch detects when a directory entry's direntlen member is 0 and returns a failure status, which breaks out of the infinite loop. As a result, U-Boot will not find files that may subsequently be recovered when the journal is replayed. This is better behaviour than hanging in an infinite loop, but as a further improvement maybe U-Boot could interpret the ext3 journal and actually find the unsynced entries. Signed-off-by: Thomas Fitzsimmons <fitzsim@cisco.com> Reviewed-by: Stefan Roese <sr@denx.de>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-10-6/+1
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* compat: Remove is_power_of_2() definitionFabio Estevam2015-11-05-1/+1
| | | | | | | | | | Use the is_power_of_2() definition from log2.h to align with the kernel implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* ubi,ubifs: sync with linux v4.2Heiko Schocher2015-10-26-485/+549
| | | | | | | | | | | | | | | | | sync with linux v4.2 commit 64291f7db5bd8150a74ad2036f1037e6a0428df2 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sun Aug 30 11:34:09 2015 -0700 Linux 4.2 This update is needed, as it turned out, that fastmap was in experimental/broken state in kernel v3.15, which was the last base for U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
* ubifs: Add generic fs supportHans de Goede2015-10-24-0/+16
| | | | | | | | Add generic fs support, so that commands like ls, load and test -e can be used on ubifs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* ubifs: Add functions for generic fs useHans de Goede2015-10-24-0/+65
| | | | | | | | Implement the necessary functions for implementing generic fs support for ubifs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs useHans de Goede2015-10-24-19/+57
| | | | | | | | | | | Modify the ubifs u-boot wrapper function prototypes for generic fs use, and give them their own header file. This is a preparation patch for adding ubifs support to the generic fs code from fs/fs.c. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* fs/fat/fat_write: Fix management of empty filesBenoît Thébaudeau2015-10-11-21/+64
| | | | | | | | | | | | Overwriting an empty file not created by U-Boot did not work, and it could even corrupt the FAT. Moreover, creating empty files or emptying existing files allocated a cluster, which is not standard. Fix this by always keeping empty files clusterless as specified by Microsoft (the start cluster must be set to 0 in the directory entry in that case), and by supporting overwriting such files. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
* fs/fat/fat_write: Factor out duplicate codeBenoît Thébaudeau2015-10-11-48/+20
| | | | Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
* fs/fat/fat_write: Fix curclust/newclust mix-upBenoît Thébaudeau2015-10-11-3/+3
| | | | | | | curclust was used instead of newclust in the debug() calls and in one CHECK_CLUST() call, which could skip a failure case. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
* fs/fat/fat_write: Merge calls to set_cluster()Benoît Thébaudeau2015-10-11-12/+1
| | | | | | | | set_contents() had uselessly split calls to set_cluster(). Merge these calls, which removes some cases of set_cluster() being called with a size of zero. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
* fs/fat/fat_write: Fix buffer alignmentsBenoît Thébaudeau2015-10-11-14/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | set_cluster() was using a temporary buffer without enforcing its alignment for DMA and cache. Moreover, it did not check the alignment of the passed buffer, which can come directly from applicative code or from the user. This could cause random data corruption, which has been observed on i.MX25 writing to an SD card. Fix this by only passing ARCH_DMA_MINALIGN-aligned buffers to disk_write(), which requires the introduction of a buffer bouncing mechanism for the misaligned buffers passed to set_cluster(). By the way, improve the handling of the corresponding return values from disk_write(): - print them with debug() in case of error, - consider that there is an error is disk_write() returns a smaller block count than the requested one, not only if its return value is negative. After this change, set_cluster() and get_cluster() are almost symmetrical. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
* fs: ext4: fix symlink read functionGary Bisson2015-09-11-1/+1
| | | | | | | Since last API changes for files >2GB, the read of symlink is broken as ext4fs_read_file now returns 0 instead of the length of the actual read. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
* ext4: fix leak in check_filename()Stephen Warren2015-09-11-2/+3
| | | | | | | | | root_first_block_buffer should be free()d in all cases, not just when an error occurs. Fix the success exit path of the function to do this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* ext4: free allocations by parse_path()Stephen Warren2015-09-11-2/+6
| | | | | | | | | | | | | | parse_path() malloc()s the entries in the array it's passed. Those allocations must be free()d by the caller, ext4fs_get_parent_inode_num(). Add code to do this. For this to work, all the array entries must be dynamically allocated, rather than a mix of dynamic and static allocations. Fix parse_path() not to over-write arr[0] with a pointer to statically allocated data. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* ext4: avoid calling ext4fs_mount() twice, which leaksStephen Warren2015-09-11-9/+0
| | | | | | | | | | | | | ext4_write_file() is only called from the "fs" layer, which calls both ext4fs_mount() and ext4fs_close() before/after calling ext4_write_file(). Fix ext4_write_file() not to call ext4fs_mount() again, since the mount operation malloc()s some RAM which is leaked when a second mount call over-writes the pointer to that data, if no intervening close call is made. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* FIX: fat: Provide correct return code from disk_{read|write} to upper layersŁukasz Majewski2015-09-11-4/+18
| | | | | | | | | | | | | | | | | | | | | | It is very common that FAT code is using following pattern: if (disk_{read|write}() < 0) return -1; Up till now the above code was dead, since disk_{read|write) could only return value >= 0. As a result some errors from medium layer (i.e. eMMC/SD) were not caught. The above behavior was caused by block_{read|write|erase} declared at struct block_dev_desc (@part.h). It returns unsigned long, where 0 indicates error and > 0 indicates that medium operation was correct. This patch as error regards 0 returned from block_{read|write|erase} when nr_blocks is grater than zero. Read/Write operation with nr_blocks=0 should return 0 and hence is not considered as an error. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid XU3 - Exynos 5433
* Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h headerSimon Glass2015-09-11-0/+4
| | | | | | | Now that we have a new header file for cache-aligned allocation, we should move the stack-based allocation macro there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* Move malloc_cache_aligned() to its own headerSimon Glass2015-09-11-0/+5
| | | | | | | | | | | | | | | | | | | At present malloc.h is included everywhere since it recently was added to common.h in this commit: 4519668 mtd/nand/ubi: assortment of alignment fixes This seems wasteful and unnecessary. We have been trying to trim down common.h and put separate functions into separate header files and that change goes in the opposite direction. Move malloc_cache_aligned() to a new header so that this can be avoided. The header would perhaps be better named as alignmem.h but it needs to be included after common.h and people might be confused by this. With the name memalign.h it fits nicely after malloc() in most cases. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* fat: handle paths that include ../Stephen Warren2015-09-11-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FAT code contains a special case to parse the root directory. This is needed since the root directory location/layout on disk is special cased for FAT12/16. In particular, the location and size of the FAT12/16 root directory is hard-coded and contiguous, whereas all FAT12/16 non-root directories, and all FAT32 directories, are stored in a non-contiguous fashion, with the layout represented by a linked-list of clusters in the FAT. If a file path contains ../ (for example /extlinux/../bcm2835-rpi-cm.dtb), it is possible to need to parse the root directory for the first element in the path (requiring application of the special case), then a sub- directory (in the general way), then re-parse the root directory (again requiring the special case). However, the current code in U-Boot only applies the special case for the very first path element, and never for any later path element. When reparsing the root directory without applying the special case, any file in a sector (or cluster?) other than the first sector/cluster of the root directory will not be found. This change modifies the non-root-dir-parsing loop of do_fat_read_at() to detect if it's walked back to the root directory, and if so, jumps back to the special case code that handles parsing of the root directory. This change was tested using sandbox by executing: ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/.." ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/" ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/.." ./u-boot -c "host bind 0 ../sd-p1.bin; ls host 0:0 /extlinux/../backup/../" ./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /bcm2835-rpi-cm.dtb" ./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../bcm2835-rpi-cm.dtb" ./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /backup/../bcm2835-rpi-cm.dtb" ./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/..backup/../bcm2835-rpi-cm.dtb" ./u-boot -c "host bind 0 ../sd-p1.bin; load host 0:0 0 /extlinux/../backup/../bcm2835-rpi-cm.dtb" (/extlinux and /backup are in different sectors so trigger some different cases, and bcm2835-rpi-cm.dtb is in a sector of the root directory other than the first). In all honesty, this change is a bit of a hack, using goto and all. However, as demonstrated above it appears to work well in practice, is quite minimal, likely doesn't introduce any risk of regressions, and hopefully doesn't introduce any maintenance issues. The correct fix would be to collapse the root and non-root loops in do_fat_read_at() and get_dentfromdir() into a single loop that has a small special-case when moving from one sector to the next, to handle the layout difference of root/non-root directories. AFAIK all other aspects of directory parsing are identical. However, that's a much larger change which needs significantly more thought before it's implemented. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* mtd/nand/ubi: assortment of alignment fixesMarcel Ziswiler2015-08-28-4/+5
| | | | | | | | | | | | | | Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer alignment into account which led to failures of the following form: ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108 ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1f7f1108 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Scott Wood <scottwood@freescale.com> [trini: Add __UBOOT__ hunk to lib/zlib/zutil.c due to malloc.h in common.h] Signed-off-by: Tom Rini <trini@konsulko.com>
* fs/fs.c: read up to EOF when len would read past EOFMax Krummenacher2015-08-13-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | http://lists.denx.de/pipermail/u-boot/2012-September/134347.html allows for reading files in chunks from the shell. When this feature is used to read past the end of a file an error was returned instead of returning the bytes read up to the end of file. Thus the following fails in the shell: offset = 0 len = chunksize do read file, offset, len write data until bytes_read < len The patch changes the behaviour to printing an informational message and returning the actual read number of bytes aka read(2) behaviour for convenient use in U-Boot scripts. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* JFFS2: Use merge sort when parsing filesystemMark Tomlinson2015-08-12-35/+69
| | | | | | | | | | | | | When building the file system the existing code does an insertion into a linked list. It attempts to speed this up by keeping a pointer to where the last entry was inserted but it's still slow. Now the nodes are just inserted into the list without searching through for the correct place. This unsorted list is then sorted once using mergesort after all the entries have been added to the list. This speeds up the scanning of the flash file system considerably. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Use CLEANMARKER to reduce scanning timeMark Tomlinson2015-08-12-0/+25
| | | | | | | | | | | | If a sector has a CLEANMARKER at the beginning, it indicates that the entire sector has been erased. Therefore, if this is found, we can skip the entire block. This was not being done before this patch. The code now does the same as the kernel does when encountering a CLEANMARKER. It still checks that the next few words are FFFFFFFF, and if so, the block is assumed to be empty, and so is skipped. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Change scansize to match linux kernelMark Tomlinson2015-08-12-1/+1
| | | | | | | | | | | | The scan code is similar to the linux kernel, but the kernel defines a much smaller size to scan through before deciding a sector is blank. Assuming that what is in the kernel is OK, make these two match. On its own, this change makes no difference to scanning of any sectors which have a clean marker at the beginning, since the entire sector is not blank. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Optimize building lists during scanMark Tomlinson2015-08-12-4/+21
| | | | | | | If the flash is slow, reading less from the flash into buffers makes the process faster. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Improve speed reading flash filesMark Tomlinson2015-08-12-6/+21
| | | | | | | | | | | | | | jffs2_1pass_read_inode() would read the entire data for each node in the filesystem, regardless of whether it was part of the file to be loaded or not. By only reading the header data for an inode, and then reading the data only when it is found to be part of the file to be loaded, much copying of data is saved. jffs2_1pass_list_inodes() read each inode for every file in the directory into a buffer. By using NULL as a buffer pointer, NOR flash simply returns a pointer, and therefore avoids a memory copy. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Only list each directory entry onceMark Tomlinson2015-08-12-5/+33
| | | | | | | | | | | | | If multiple versions of a file exist, only the most recent version should be used. The scheme to write 0 for the inode in older versions did not work, since this would have required writing to flash. The only time this caused an issue was listing a directory, where older versions of the file would still be seen. Since the directory entries are sorted, just look at the next entry in the list, and if it's the same move to that entry instead. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Speed up and fix comparison functionsMark Tomlinson2015-08-12-40/+47
| | | | | | | | | | | | | | | Copying complete nodes from flash can be slow if the flash is slow to read. By only reading the data needed, the sorting operation can be made much faster. The directory entry comparison function also had a two bugs. First, it did not ensure the name was copied, so the name comparison may have been faulty (although it would have worked with NOR flash). Second, setting the ino to zero to ignore the entry did not work, since this was either writing to a temporary buffer, or (for NOR flash) directly to flash. Either way, the change was not remembered. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* JFFS2: Return early when file read not necessaryMark Tomlinson2015-08-12-0/+6
| | | | | | | | | If a destination is not provided, jffs2_1pass_read_inode() only returns the length of the file. In this case, avoid reading all the data nodes, and return as soon as the length of the file is known. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
* sandbox: only do sandboxfs for hostfs interfaceSjoerd Simons2015-04-19-1/+5
| | | | | | | | | | | Only do sandbox filesystem access when using the hostfs device interface, rather then falling back to it in all cases. This prevents confusion situations due to the fallback being taken rather then an unsupported error being raised. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* common: Make sure arch-specific map_sysmem() is definedJoe Hershberger2015-04-18-0/+1
| | | | | | | | | | | In the case where the arch defines a custom map_sysmem(), make sure that including just mapmem.h is sufficient to have these functions as they are when the arch does not override it. Also split the non-arch specific functions out of common.h Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-09 10:03:00 +0000