summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
...
* drivers: net: ldpaa: Memset pools_params as "0" before usePrabhakar Kushwaha2016-05-03-0/+1
| | | | | | | | Memset pools_params as "0" to avoid garbage value in dpni_set_pools. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* usb: dwc2: Init desc_before_addrMarek Vasut2016-05-03-0/+3
| | | | | | | | | | | Initialize desc_before_addr, otherwise the USB core won't send the first 64B Get Device Descriptor request in common/usb.c function usb_setup_descriptor() . There are some USB devices which expect this sequence and otherwise can misbehave. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Tom Rini <trini@konsulko.com>
* usb: dwc2: Make OC protection configurableMarek Vasut2016-05-03-3/+14
| | | | | | | | | | Introduce a new flag in the controller private data, which allows selectively disabling the OC protection. Use the standard 'disable-over-current' OF prop to set this flag. This OC protection must be disabled on EBV SoCrates rev 1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* usb: dwc2: Pull Ext VBUS macro from dwc_otg_core_init()Marek Vasut2016-05-03-7/+14
| | | | | | | | | | | Introduce a boolean flag in the dwc2 controller private data and set it according to the macro (for now) instead of having this macro directly in the dwc_otg_core_init(). This will let us configure the flag from DT or such later on, if needed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* usb: dwc2: Pass private data into dwc_otg_core_init()Marek Vasut2016-05-03-2/+3
| | | | | | | | | | Pass the whole bulk of private data instead of just the regs, since the private data will soon contain important configuration flags. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@kernel.org>
* Fix spelling of "occurred".Vagrant Cascadian2016-05-02-14/+14
| | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* drivers/video/am335x-fb: Properly point framebuffer behind paletteMartin Pietryka2016-04-28-4/+4
| | | | | | | | | | | | | | | | | | | | | The DMA was outputting the palette on the screen because the base for the DMA was not after the palette. In addition to that, the ceiling was also too high, this led that the output on the screen was shifted. NOTE: According to the TRM, even in 16/24bit mode a palette is required in the first 32 bytes of the framebuffer. See also: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/234967/834483#834483 "In this mode, the LCDC will assume all information is data and thus you need to ensure that the DMA points to the first pixel of data and not the first entry in the frame buffer which is the beginning of the 512 byte palette." Signed-off-by: Martin Pietryka <martin.pietryka@chello.at> Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* drivers/video/am335x-fb: Add support for 16bpp formatMartin Pietryka2016-04-28-3/+19
| | | | | | | | | | | | | | | To support 16bpp we just need to change the raster_ctrl register accordingly. Also 32bpp mode should work as well, but was not tested. According to the TRM the uppermost byte will be ignored when LCD_TFT_24BPP_UNPACK is set. The switch logic is based on the Linux kernel tilcdc driver: drivers/gpu/drm/tilcdc/tilcdc_crtc.c: lines 407 through 419 (kernel was checked out at commit: bcc981e9ed8) Signed-off-by: Martin Pietryka <martin.pietryka@chello.at> Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-04-25-1/+1
|\
| * drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definitionMartin Pietryka2016-04-25-1/+1
| | | | | | | | | | | | | | According to the TRM you have to set bits [21:20] to 0b10 for RAW mode, so (0x10 << 20) is obviously wrong here. Signed-off-by: Martin Pietryka <martin.pietryka@chello.at>
* | pci: Device scanning range fixYoshinori Sato2016-04-25-1/+1
| | | | | | | | | | | | | | | | The terminal condition in the area where a PCI device is scanned is wrong, and 1f.7 isn't scanned. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | mmc: sdhci: add const qualifier to the name of struct sdhci_hostMasahiro Yamada2016-04-25-3/+3
| | | | | | | | | | | | | | This allows to drop annoying (char *) casts when setting the host name of struct sdhci_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sf: fix timebase data type in _wait_ready()Stephen Warren2016-04-25-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | get_timer() returns an unsigned 64-bit value, but is currently assigned to a signed 32-bit variable. Due to sign extension and data truncation, this causes the timeout loop in spi_flash_cmd_wait_ready() to immediately (and incorrectly) fire for about 50% of all time values, based on whether bit 31 is set. In sandbox at least, this causes the test to pass or fail based on system uptime, as opposed to time since the U-Boot binary was started. Fixes: 4efad20a1751 ("sf: Update status reg check in spi_flash_cmd_wait_ready") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-uniphierTom Rini2016-04-25-106/+110
|\ \
| * | clk: uniphier: add Media I/O clock driver support for PH1-LD20Masahiro Yamada2016-04-24-0/+4
| | | | | | | | | | | | | | | | | | PH1-LD20 needs this for its SD card controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20Masahiro Yamada2016-04-24-4/+4
| | | | | | | | | | | | | | | | | | | | | I found many mistakes in the initial version. Fixes: 8a3328c209d0 ("pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | pinctrl: uniphier: rename function/array namesMasahiro Yamada2016-04-24-102/+102
| |/ | | | | | | | | | | Make function/array names match the file names for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-usbTom Rini2016-04-25-50/+81
|\ \
| * | dfu: ram: fix number base of RAM entity parametersStephen Warren2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot typically interprets unprefixed numbers as base 16, and DFU RAM entity parsing has historically done so. Reverse the change to default to base 10, so that values in previously working command-lines aren't mis-parsed, causing RAM corruption, crashes, hangs, etc. Fixes: 6aeb877afef0 ("drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env") Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> [Test HW: AM335x BBB]
| * | drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info envMugunthan V N2016-04-25-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot crashes when an invalid dfu_alt_info is set and tried using dfu command. Fixing this as it is handled in dfu-mmc. => dfu 0 ram 0 data abort pc : [<9ff893d6>] lr : [<9ff6edb9>] reloc pc : [<808323d6>] lr : [<80817db9>] sp : 9ef36cf0 ip : 00000158 fp : 9ffbc0b8 r10: 9ffbc0b8 r9 : 9ef36ed8 r8 : 00000000 r7 : 00000000 r6 : 9ffbc0c8 r5 : 9ef36cfc r4 : 9ef392c8 r3 : 00000004 r2 : 00000000 r1 : 9ff9a985 r0 : ffffffff Flags: Nzcv IRQs off FIQs on Mode SVC_32 Resetting CPU ... resetting ... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | usb: s3c-otg: Fix remaining bytes in debug messagesRoger Quadros2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remaining bytes means bytes that are not yet transferred and not the bytes that were transferred in the last transfer. Reported-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm28155_ap board]
| * | usb: s3c-otg: Fix short packet for request size > ep.maxpacketRoger Quadros2016-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Request size can be greater than ep.packet and still end in a short packet. We need to tackle this case as end of transfer (if short_not_ok is not set) as indicated in USB 2.0 Specification [1], else we get stuck up on certain protocols like fastboot. [1] - USB2.0 Specification, Section 5.3.2 Pipes Reported-by: Steve Rae <steve.rae@broadcom.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <steve.rae@broadcom.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
| * | fastboot: Clean up bulk-out logicRoger Quadros2016-04-25-27/+23
| | | | | | | | | | | | | | | | | | | | | | | | Just use ep->maxpacket to get the maxpacket size and simplify the bulk-out maxpacket alignment. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com>
| * | fastboot: Enable the respective speed endpoints at runtimeRoger Quadros2016-04-25-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a dual speed configuration we need to check at runtime if we want to enable the Full-Speed or High-Speed endpoint. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
| * | fastboot: Fix wMaxPacketSize for High-Speed IN endpointRoger Quadros2016-04-25-9/+27
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64. While fixing that we do some clean ups like - use cpu_to_le16(decimal_length) instead of hexadecimal length. - No need to initialize bInterval to 0. Static variables are 0 initialized. - Move descriptor setting from fastboot_add to to fastboot_bind. - check for dual speed configuration before setting the high speed descriptors. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
* | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2016-04-25-160/+361
|\ \
| * | i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)Stefan Roese2016-04-25-12/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the PCI(e) based I2C cores. Which can be found for example on the Intel Bay Trail SoC. It has 7 I2C controllers implemented as PCI devices. This patch also adds the fixed values for the timing registers for BayTrail which are taken from the Linux designware I2C driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | i2c: designware_i2c: Add DM supportStefan Roese2016-04-25-26/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds DM support to the designware I2C driver. It currently supports DM and the legacy I2C support. The legacy support should be removed, once all platforms using it have DM enabled. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
| * | i2c: designware_i2c: Prepare for DM driver conversionStefan Roese2016-04-25-83/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares the designware I2C driver for the DM conversion. This is mainly done by removing struct i2c_adapter from the functions that shall be used by the DM driver version as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
| * | i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()Stefan Roese2016-04-25-24/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Integrating set_speed() into dw_i2c_set_bus_speed() will make the conversion to DM easier for this driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
| * | i2c: designware_i2c: Add dw_i2c_enable() helper functionStefan Roese2016-04-25-20/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dw_i2c_enable() is used to dis-/en-able the I2C controller. It makes sense to add such a function, as the controller is dis-/en-abled multiple times in the code. Additionally, this function now checks, if the controller is really dis-/en-abled. This code is copied from the Linux I2C driver version. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | i2c: designware_i2c: Add ic_enable_status to ic_regs structStefan Roese2016-04-25-33/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ic_enable_status register to the i2c_regs struct. Additionally the register offsets are added, to better check, if the offset matches the register description in the datasheet. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
| * | dm: core: Add dev_get_addr_ptr() to return a pointer to the reg addressStefan Roese2016-04-25-0/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms (e.g. x86), the return value of dev_get_addr() can't be assigned to a pointer type variable directly. As there might be a difference between the size of fdt_addr_t and the pointer type. On x86 for example, "fdt_addr_t" is 64bit but "void *" only 32bit. So assigning the register base directly in dev_get_addr() results in this compilation warning: warning: cast to pointer from integer of different size This patch introduces the new function dev_get_addr_ptr() that returns a pointer to the 'reg' address that can be used by drivers in this case. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | mtd, ubi: set free_count to zero before walking through erase listHeiko Schocher2016-04-22-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | Set free_count to zero before walking through ai->erase list in wl_init(). As U-Boot has no workqueue/threads, it immediately calls erase_worker(), which increase for each erased block free_count. Without this patch, free_count gets after this initialized to zero in wl_init(), so the free_count variable always has the maybe wrong value 0. Detected this behaviour on the dxr2 board, where the UBI fastmap gets not written when attaching/dettaching on an empty NAND. It drops instead the error message: could not find any anchor PEB With this patch, fastmap gets written on dettach. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-04-20-3/+130
|\ | | | | | | | | | | | | | | | | | | Conflicts: configs/bcm28155_ap_defconfig configs/dra72_evm_defconfig configs/dra74_evm_defconfig configs/ma5d4evk_defconfig Signed-off-by: Tom Rini <trini@konsulko.com>
| * usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko2016-04-20-1/+14
| | | | | | | | | | | | And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-20-0/+17
| | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-20-0/+10
| | | | | | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-20-0/+23
| | | | | | | | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko2016-04-20-0/+6
| | | | | | | | | | | | | | While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-20-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to KconfigSam Protsenko2016-04-20-0/+21
| | | | | | | | | | | | | | | | | | | | | | The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
| * USB: g_dnl: Change device classJohn Tobias2016-04-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan). But, not in OS X (Yosemite). By applying the said patch, it extends the ums support. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid XU3 (./test/py UMS + DFU tests) Tested-by: John Tobias <john.tobias.ph@gmail.com> Linux: - Run ums to expose all my eMMC partition - shows all correctly - Run ums to expose only 1 partition of my eMMC - show correctly Windows: - Run ums to expose all my eMMC partition - it detects but it prompts, if I want to format it (due to a non windows partition) - Run ums to expose only the FAT32 partition - it show the partition correctly.
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-04-20-87/+97
|\ \
| * | ddr: altera: Repair DQ window centering codeMarek Vasut2016-04-20-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code uses a lot of signed numbers, which ended up in variables of unsigned type, which resulted in all sorts of underflows. This in turn caused incorrect calibration on certain boards. Moreover, repair the readout of the DQ delay, which was being pulled from wrong register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | ddr: altera: Staticize global variablesMarek Vasut2016-04-20-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Just staticize global variables in sequencer, since there is no point in having these symbols available outside of the DDR code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | ddr: altera: Make DLEVEL behavior inclusiveMarek Vasut2016-04-20-66/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, the DLEVEL selects the debug level within the sequencer code, but only displays the messages on that particular debug level. Tweak the handling such that for particular debug level, debug messages on that level and lower are displayed. This allows better regulation of debug message verbosity. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | ddr: altera: Zero DM IN delay in scc_mgr_zero_group()Marek Vasut2016-04-20-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This one last set of delay configuration registers was not properly zeroed out originally, fix it and zero them out. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | ddr: altera: Remove unnecessary ODT mode configMarek Vasut2016-04-20-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no point in resetting the ODT setting if the write test failed, since the code will always retry the calibration and thus reconfigure the ODT anyway OR the code will fail calibration and halt. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * | ddr: altera: Remove unnecessary update of the SCCMarek Vasut2016-04-20-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every invocation of the scc_mgr_set_dqs_en_delay_all_ranks() is followed by SCC manager update. Moreover, only this function triggers the SCC manager update internally. Thus, remove the internal invocation to avoid triggering the update twice. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
generated by cgit v1.1 at 2024-12-26 07:29:24 +0000