summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* exynos: video: Drop old unused codeSimon Glass2016-05-25-74/+0
| | | | | | | | | Now that we are using driver model, we can drop the weak functions and LCD init in the board file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Convert several boards to driver model for videoSimon Glass2016-05-25-198/+357
| | | | | | | | | | | | | | | | | | | | | | | | | | Update several boards to use driver model for video. This involves changes to the EDP and FIMD (frame buffer) drivers. Existing PWM, simple-panel and pwm-backlight drivers are used. These work without additional configuration since they use the device tree settings in the same way as Linux. Boards converted are: - snow - spring - peach-pit - peach-pi All have been tested. Not converted: - MIPI display driver - s5pc210_universal - smdk5420 - smdk5250 - trats - trats2 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Rename variables for driver modelSimon Glass2016-05-25-372/+369
| | | | | | | | Use 'priv' for a private pointer and 'regs' for a register pointer. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Rename edp_device_info to exynos_dp_privSimon Glass2016-05-25-15/+15
| | | | | | | | | Rename this function to better fit with driver model. It is the private data for the exynos EDP driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: Simplify calling of exynos_dp_phy_ctrl()Simon Glass2016-05-25-7/+2
| | | | | | | | This function controls enabling the EDP PHY. Rename it and drop the existing weak functions, which are confusing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: pwm: Add a driver for the exynos5 PWMSimon Glass2016-05-25-0/+130
| | | | | | | | This driver supports the standard PWM API. There are 5 PWMs. Four are used normally and the last is normally used as a timer. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Combine LCD driver into one fileSimon Glass2016-05-25-406/+387
| | | | | | | | | | At present exynos_fimd.c is the controller and exynos_fb.c is the U-Boot LCD interface. With driver model we want these in one file, so join them in preparation. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move mipi_lcd_device_dt into a functionSimon Glass2016-05-25-8/+9
| | | | | | | | | In preparation for making this a parameter, move it into the function that sets it up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move struct exynos_platform_mipi_dsim into vidinfoSimon Glass2016-05-25-16/+5
| | | | | | | | | Put the pointer to this structure in struct vidinfo so that we can reference it without it being global. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move dsim_config_dt into a functionSimon Glass2016-05-25-18/+19
| | | | | | | | | In preparation for making this a parameter, move it into the function that sets it up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop static variables in exynos_dp_lowlevel.cSimon Glass2016-05-25-285/+351
| | | | | | | | Drop these and use parameters instead. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop static variables in exynos_fb.cSimon Glass2016-05-25-6/+2
| | | | | | | | Drop these and use the existing variables instead. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop static variables in exynos_fimd.cSimon Glass2016-05-25-23/+30
| | | | | | | | Drop these and use parameters instead. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop the static lcd_base_addr variableSimon Glass2016-05-25-34/+15
| | | | | | | | Drop this and use parameters instead. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Remove use of vidinfo_t typedefSimon Glass2016-05-25-11/+11
| | | | | | | | | Use 'struct vidinfo' instead so that we can change this to a struct with a different name in future. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop dead codeSimon Glass2016-05-25-26/+0
| | | | | | | | | | We always use device tree with video, so can drop these #ifdefs. Some of the hardware addresses are not needed either. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move driver files into their own directorySimon Glass2016-05-25-7/+15
| | | | | | | | Move all the exynos video drivers into one place for ease of maintenance. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* serial: s5p: use clock api to get clock rateThomas Abraham2016-05-25-1/+14
| | | | | | | | | | On Exynos platforms that support clock driver API, allow the driver to use clock api get the SCLK clock rate. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* serial: s5p: get the port id number from the alias of the device nodeThomas Abraham2016-05-25-2/+2
| | | | | | | | | | The port id, if not specified in the device node, can be obtained from the alias of the device node listed in the aliases node. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* clk: exynos: add clock driver for Exynos7420 SocThomas Abraham2016-05-25-0/+307
| | | | | | | | | | | | Add a clock driver for Exynos7420 SoC. There are about 25 clock controller blocks in Exynos7420 out of which support for topc, top0 and peric1 blocks are added in this initial version of the driver. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* pinctrl: Add pinctrl driver support for Exynos7420 SoCThomas Abraham2016-05-25-0/+359
| | | | | | | | | | | | | | | | | | | Add pinctrl driver support for Samsung's Exynos7420 SoC. The changes have been split into Exynos7420 specific and common Exynos specific portions so that this implementation is reusable on other Exynos SoCs as well. The Exynos pinctrl driver supports only device tree based pin configuration. The bindings used are similar to the ones used in the linux kernel. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devicesThomas Abraham2016-05-25-0/+1
| | | | | | | | | | | | It is possible to have multiple pin controllers in the system. Use the DM_UC_FLAG_SEQ_ALIAS flag so that the pinctrl instances are assigned a sequence number. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-05-24-156/+381
|\
| * driver/ddr/fsl: Add workaround for erratum A-010165Shengzhou Liu2016-05-18-1/+9
| | | | | | | | | | | | | | | | | | During DDR-2133 operation, the transmit data eye margins determined during the memory controller initialization may be sub-optimal, set DEBUG_29[12] and DEBUG_29[13:16] = 4'b0100 before MEM_EN is set. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * crypto/fsl: add support for multiple SEC engines initializationAlex Porosanu2016-05-18-115/+159
| | | | | | | | | | | | | | | | | | For SoCs that contain multiple SEC engines, each of them needs to be initialized (by means of initializing among others the random number generator). Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * sf: Disable 4-KB erase command for SPANSION S25FS-S familyYuan Yao2016-05-18-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. The default status of the flash is in this hybrid architecture. The parameter sectors and the uniform sectors have different erase commands. This patch disable the hybrid sector architecture then the flash will has uniform sector size and uniform erase command. This configuration is temporary, the flash will revert to hybrid architecture after power on reset. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * spi: fsl_qspi: Enable Spansion S25FS-S family flashesYuan Yao2016-05-18-6/+57
| | | | | | | | | | | | | | | | | | | | The flash type of LS2085AQDS QSPI is S25FS256S. It has special write any device register command and read any device register command. This patch enable support for those commands. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * spi: fsl_qspi: Assign AMBA mem according CS num in dtsYuan Yao2016-05-18-12/+43
| | | | | | | | | | | | | | | | | | | | | | QSPI controller automatic enable the chipselect signal according the dest AMBA memory address. Now we distribute the AMBA memory zone averagely to every chipselect slave device according chipselect numbers got from dts node. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * spi: fsl_qspi: Fix issues on arm64Yuan Yao2016-05-18-19/+27
| | | | | | | | | | | | | | | | | | | | | | The address value and size value get from dts "reg" property have type of u64 on arm64. If we assign those values to "u32" variables, driver can't work correctly. Converting the type of those variables to fdt_xxx_t. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * driver/ddr/fsl: Add workaround for erratum A-009801Shengzhou Liu2016-05-17-0/+7
| | | | | | | | | | | | | | | | The initial training for the DDRC may provide results that are not optimized. The workaround provides better read timing margins. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * drivers/ddr/fsl: update workaround for erratum A-008511Shengzhou Liu2016-05-17-3/+7
| | | | | | | | | | | | | | | | Per the latest erratum document, update step 4 and step 8, only DEBUG_29[21] is changed, all other bits should not be changed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-05-24-530/+1172
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/zynq_gem.c
| * | net: phy: dp83867: Add SGMII helper for configurationDan Murphy2016-05-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code assumed that if the interface is not RGMII configured then it must be SGMII configured. This device has the ability to support most of the MII interfaces. Therefore add the helper for SGMII and only configure the device if the interface is configured for SGMII. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: Move is_rgmii helper to phy.hDan Murphy2016-05-24-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the phy_interface_is_rgmii to the phy.h file for all phy's to be able to use the API. This now aligns with the Linux kernel based on commit e463d88c36d42211aa72ed76d32fb8bf37820ef1 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: ti: Allow the driver to be more configurableDan Murphy2016-05-24-10/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all devices use the same internal delay or fifo depth. Add the ability to set the internal delay for rx or tx and the fifo depth via the devicetree. If the value is not set in the devicetree then set the delay to the default. If devicetree is not used then use the default defines within the driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq_gem: Add the passing of the phy-handle nodeDan Murphy2016-05-24-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to pass the phy-handle node offset to the phy driver. This allows the phy driver to access the DT subnode's data and parse accordingly. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: cpsw: Add reading of DT phy-handle nodeDan Murphy2016-05-24-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to read the phy-handle node of the cpsw slave. Upon reading this handle the phy-id can be stored based on the reg node in the DT. The phy-handle also needs to be stored and passed to the phy to access any phy data that is available. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: cpsw: add support for reading mac address from efuseMugunthan V N2016-05-24-17/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different TI platforms has to read with different combination to get the mac address from efuse. So add support to read mac address based on machine/device compatibles. The code is taken from Linux drivers/net/ethernet/ti/cpsw-common.c done by Tony Lindgren. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: cpsw: fix get mdio base and gmii_sel reg from DTMugunthan V N2016-05-24-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dra7x platforms address bus is define as 64 bits to support LAPE, fdtdec_get_addr() returns a invalid address for mdio based and gmii_sel register address. Fixing this by using fdtdec_get_addr_size_auto_noparent() which will derive address cell and size cell from its parent. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: cpsw: fix cpsw dp parse when num slaves as 1Mugunthan V N2016-05-24-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some boards number of slaves can be 1 when only one port ethernet is pinned out. So do not break when slave_index and num slaves check fails, instead continue to parse the next child. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: core: device: add support to check dt compatible for a device/machineMugunthan V N2016-05-24-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide an api to check whether the given device or machine is compatible with the given compat string which helps in making decisions in drivers based on device or machine compatible. Idea taken from Linux. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: Add PHY driver for mv88e61xx switchesKevin Smith2016-05-24-0/+1020
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous mv88e61xx driver was a driver for configuring the switch, but did not integrate with the PHY/networking system, so it could not be used as a PHY by U-boot. This is a complete rework to support this device as a PHY. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: Remove unused mv88e61xx switch driverKevin Smith2016-05-24-598/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No boards are using this driver. Remove in preparation for a new driver with integrated PHY support. Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-05-24-73/+152
|\ \ \
| * | | phy: marvell: Do not reset phy after negotiationMichal Simek2016-05-24-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "net: phy: do not read configuration register on reset" (sha1: a058052c358c3ecf5f394ff37def6a45eb26768c) was causing regression on zynq zc702 board where Marwell 88e1118 phy was resetted after negotiation was setup. Phy reset is done pretty early in phy_connect_dev() and doens't need to be called again in phy code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | phy: Wire return value from phy_config()Michal Simek2016-05-24-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix zynq_gem driver to handle error from phy_config correctly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | net: phy: Handle phy_startup() error codes properlyMichal Simek2016-05-24-56/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Propagate error code from genphy_update_link() to phy startup(). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | | phy: Return correct error code when timeout happensMichal Simek2016-05-24-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Return -ETIMEDOUT if timeout happens. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | | net: xilinx: Handle error value from phy_startup()Michal Simek2016-05-24-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle error returned by phy_startup() properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | | fpga: Fix typo in function commentMichal Simek2016-05-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-11-06 05:53:21 +0000