summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* gpio: at91: Fix getting address of private dataAxel Lin2015-02-12-5/+5
| | | | | | | | Use dev_get_priv() rather than dev_get_platdata() to get correct address of private data. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-10-83/+228
|\
| * x86: Add SPI support to quark/galileoBin Meng2015-02-06-1/+2
| | | | | | | | | | | | | | | | | | | | The Quark SoC contains a legacy SPI controller in the legacy bridge which is ICH7 compatible. Like Tunnel Creek and BayTrail, the BIOS control register offset in the ICH SPI driver is wrong for the Quark SoC too, unprotect_spi_flash() is added to enable the flash write. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: spi: Support ValleyView in ICH SPI driverSimon Glass2015-02-06-20/+47
| | | | | | | | | | | | | | | | The base address is found in a different way and the protection bit is also in a different place. Otherwise it is very similar. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: mmc: Move common FSP functions into a common fileSimon Glass2015-02-06-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | Since these board functions seem to be the same for all boards which use FSP, move them into a common file. We can adjust this later if future FSPs need more flexibility. This creates a generic PCI MMC device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: bootstage: Add time measurement for vesa start-upSimon Glass2015-02-05-0/+2
| | | | | | | | | | | | | | | | Since we must run a PCI BIOS ROM, and this can take a calamitous amount of time, measure it using bootstage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: video: Allow video ROM execution to fall back to the other methodSimon Glass2015-02-05-10/+28
| | | | | | | | | | | | | | | | If the BIOS emulator is not available, allow use of native execution if available, and vice versa. This can be controlled by the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * usb: pci: Add XHCI driver for PCISimon Glass2015-02-05-0/+61
| | | | | | | | | | | | | | | | Add a driver which locates the available XHCI controllers on the PCI bus and makes them available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * usb: pci: Use pci_find_class() to find the deviceSimon Glass2015-02-05-52/+1
| | | | | | | | | | | | | | Use the new utility function instead of local code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: video: Enable video for Minnowboard MaxSimon Glass2015-02-05-0/+1
| | | | | | | | | | | | | | This board uses a new PCI ID. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * pci: Add a function to find a device by classSimon Glass2015-02-05-0/+43
| | | | | | | | | | | | | | | | There is an existing function prototype in the header file but it is not implemented. Implement something similar. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-02-10-1/+34
|\ \
| * | arm, at91, wdt: make timeout configurableHeiko Schocher2015-02-07-0/+4
| | | | | | | | | | | | | | | | | | | | | make the HW WDT timeout configurable through the define CONFIG_AT91_HW_WDT_TIMEOUT. Signed-off-by: Heiko Schocher <hs@denx.de>
| * | mtd: atmel_nand: according to pmecc version to perform 0xff page correctionWu, Josh2015-02-07-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the PMECC hardware has different version. In SAMA5D4 chip, the PMECC ip can generate 0xff pmecc ECC value for all 0xff sector. According to this, add PMECC version check, if it's SAMA5D4 then we always let PMECC hardware to correct it. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | ARM: atmel: cleanup: remove at91cap9 related codeBo Shen2015-02-07-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | As the at91cap9adk board is removed by commit: b5508344 (ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2015-02-10-0/+108
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: include/splash.h Signed-off-by: Tom Rini <trini@ti.com>
| * | lcd: introduce lcd_set_cmapNikita Kiryanov2015-02-10-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel-specific code for setting cmap for bitmap images into a new function lcd_set_cmap(). A default version is implemented with the remainder of the code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
| * | lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.cNikita Kiryanov2015-02-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the bitmap_plot #ifdef complexity by extracting MPC823-specific code for setting cmap into its own implementation of lcd_logo_set_cmap(), implemented in mpc8xx_lcd.c. In the MPC823 implementation, ARRAY_SIZE(bmp_logo_palette) is switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which would cause a compilation error because the logo data and palette arrays would be defined twice. This is a step towards cleaning bitmap_plot() of platform-specific code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
| * | lcd: atmel: introduce lcd_logo_set_cmapNikita Kiryanov2015-02-10-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the bitmap_plot #ifdef complexity by extracting Atmel-specific code for setting cmap into a new function lcd_logo_set_cmap(), which is implemented in atmel_lcdfb driver and defined as part of common/lcd.c api with a weak dummy version. In the Atmel implementation, ARRAY_SIZE(bmp_logo_palette) is switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which would cause a compilation error because the logo data and palette arrays would be defined twice. This is a step towards cleaning bitmap_plot() of platform-specific code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
| * | lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.cNikita Kiryanov2015-02-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the amount of platform-specific code in common/lcd.c by moving MPC823 implementation of fb_put_byte() to mpc8xx_lcd.c. Since we must also have a default implementation for everybody else, make the remainder of the code into a weak function. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
| * | lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfbNikita Kiryanov2015-02-10-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the amount of platform-specific code in common/lcd.c by moving Atmel implementation of fb_put_word() to atmel_lcdfb.c. Since we must also have a default implementation for everybody else, make the remainder of the code into a weak function. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Bo Shen <voice.shen@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
| * | lcd: split configuration_get_cmapNikita Kiryanov2015-02-10-0/+40
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | configuration_get_cmap() is multiple platform-specific functions stuffed into one function. Split it into multiple versions, and move each version to the appropriate driver to reduce the #ifdef complexity. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bo Shen <voice.shen@atmel.com> Tested-by: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* | arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdrStefan Roese2015-02-06-0/+15419
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini2015-02-04-0/+8
|\
| * ubi: reset mtd_devs when ubi part failHeiko Schocher2015-01-28-0/+8
| | | | | | | | | | | | | | if "ubi part" fails, reset also mtd_devs to 0, as further "ubi part" would use wrong mtd_devs. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-02-02-0/+4
|\ \
| * | omap3: mmc: add 1.8v bias setting for MMC1Albert ARIBAUD \(3ADEV\)2015-01-29-0/+4
| |/ | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2015-02-02-13/+17
|\ \
| * | sunxi: mmc: Add 'sunxi_' prefix to the static functionsSiarhei Siamashka2015-02-02-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This results in a much more readable callgraph, because now they can't be confused with the function having exactly the same name in the generic mmc code. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: video: Force h/vsync active high when using ext. vga dac on some boardsHans de Goede2015-02-02-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On both my A13-OLinuxIno and my A13-OLinuxIno-Micro, the vga output gives an unstable image when active low v or hsync is used. The problem seems to be specific to the OLinuxIno A13 (normal & micro) boards. I've just looked up the schematics and they use an opendrain driver for the vga sync lines, and with sync pulses it is the logical high->low edge of the pulse which counts for the timing, which with an active low sync is being driven by the pull-up, and that simply seems to not drive it hard enough to get a stable image. So force v and hsync active high on these boards. independent of what the modeline says. This fixes the unstable image. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()Hans de Goede2015-02-02-3/+1
| |/ | | | | | | | | | | | | | | It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call into rsb_init(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-01-31-2/+93
|\ \
| * | net/designware: add error message on DMA reset timeoutAlexey Brodkin2015-01-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If for some reason DMA module fails to reset user oserves only this: --->--- # dhcp Trying dwmac.e0018000 FAIL --->--- This message makes not much sense. With proposed change error message will be more helpful: --->--- # dhcp Trying dwmac.e0018000 DMA reset timeout FAIL --->--- For example user may do power toggle to recover board functionality. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: micrel: add support for KSZ8895 switch in SMI modePhilippe De Muyter2015-01-30-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a phy driver for the Micrel KSZ8895 switch. As the SoC MAC is directly connected to the switch MAC the link to the switch is always up. But the KSZ8895 switch can be hardwired in three configuration modes : - not configurable with eventually an eeprom-stored configuration - configurable by the mdio/mdc connection (SMI protocol) - configurable by a SPI connection. In not configurable mode, the switch starts automatically, but in the other modes, it must be started programmatically, by writing 1 in configuration register 1. We only support the not configurable and mdio/mdc (aka SMI) modes here. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | Add MS7206SE ethernet supportYoshinori Sato2015-01-30-1/+30
| | | | | | | | | | | | | | | Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Fix NULL access in case init_phy() failsClaudiu Manoil2015-01-30-0/+2
| |/ | | | | | | | | | | | | | | If the PHY is not recognized don't access phydev (NULL) and return 0 to signal failure. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2015-01-30-569/+2016
|\ \
| * | dm: cros_ec: Convert cros_ec_i2c over to driver modelSimon Glass2015-01-29-53/+29
| | | | | | | | | | | | | | | | | | | | | Move this driver to use driver model and update the snow configuration to match. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: i2c: Add two more I2C init functions to the compatibility layerSimon Glass2015-01-29-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | These functions are useful in case the board calls them. Also fix a missing parameter caused by applying the wrong patch (actually I failed to send v2 and applied v1 by mistake). Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: i2c: dts: Support an offset-len device tree propertySimon Glass2015-01-29-1/+2
| | | | | | | | | | | | | | | | | | | | | Since U-Boot can support different offset lengths (0-4 bytes), add a device tree property to specify this. This avoids hard-coding it in the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: i2c: s3c24x0: adjust to dm-i2c apiPrzemyslaw Marczak2015-01-29-43/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adjusts the s3c24x0 driver to new i2c api based on driver-model. The driver supports standard and high-speed i2c as previous. Tested on Trats2, Odroid U3, Arndale, Odroid XU3 Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Tested-by: Simon Glass <sjg@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dm: i2c-uclass-compat: fix missed argumentPrzemyslaw Marczak2015-01-29-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes build error for CONFIG_DM_I2C_COMPAT. In i2c_get_chip_for_busnum() call, one of argument was missed, which was offset_len. Now it is set to 'alen' as previous. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | DM: crypto/fsl - Add Freescale rsa DM driverRuchika Gupta2015-01-29-0/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | Driver added for RSA Modular Exponentiation using Freescale Hardware Accelerator CAAM. The driver uses UCLASS_MOD_EXP Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * | DM: crypto/rsa_mod_exp: Add rsa Modular Exponentiation DM driverRuchika Gupta2015-01-29-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new rsa uclass for performing modular exponentiation and implement the software driver basing on this uclass. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * | dm: cros_ec_spi: Remove old pre-driver-model codeSimon Glass2015-01-29-49/+2
| | | | | | | | | | | | | | | | | | This is no-longer needed since all platforms use SPI for cros_ec. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: cros_ec: Don't require protocol 3 supportSimon Glass2015-01-29-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | I2C is now deprecated on ARM platforms and there are no devices that use it with the v3 protocol. We can't require v3 support if we want to support I2C. Adjust the error handling to suit. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: core: Ignore disabled devices when bindingSimon Glass2015-01-29-0/+5
| | | | | | | | | | | | | | | | | | | | | We don't want to bind devices which should never be used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | dm: i2c: Move slave details to child platdataSimon Glass2015-01-29-87/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we go through various contortions to store the I2C's chip address in its private data. This only exists when the chip is active so must be set up when it is probed. Until the device is probed we don't actually record what address it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the address when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | dm: spi: Move slave details to child platdataSimon Glass2015-01-29-63/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: spi: Set up the spi_slave device pointer in child_pre_probe()Simon Glass2015-01-29-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-10-30 09:31:03 +0000