summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* ehci-hcd: Boost transfer speedBenoît Thébaudeau2012-09-01-29/+138
| | | | | | | | | | | | | | | | | | | This patch takes advantage of the hardware EHCI qTD queuing mechanism to avoid software and transfer splitting overhead so as to make transfers as fast as possible. The only drawback is a call to memalign. However, this is fast compared to the transfer timings, and the heap size to allocate is small, e.g. 128 kiB in the worst case for a transfer length of 65535 packets of 512 bytes. Tested on i.MX25, i.MX35 and i.MX51. In my test conditions, the speed gain was very significant (several times faster), which is really appreciable when accessing large files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* ehci: cosmetic: Define used constantsBenoît Thébaudeau2012-09-01-69/+118
| | | | | | | | | Make some light cosmetic code cleanup by the way. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* ehci: Fail for multi-transaction interrupt transfersBenoît Thébaudeau2012-09-01-1/+10
| | | | | | | | | | | Interrupt transfers requiring several transactions are not supported by submit_int_msg() because bInterval is ignored. This patch returns a failure code and prints an error message in this case. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* dfu: MMC specific routines for DFU operationLukasz Majewski2012-09-01-0/+163
| | | | | | | | Support for MMC storage devices to work with DFU framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: DFU backend implementationLukasz Majewski2012-09-01-0/+281
| | | | | | | | | | New, separate driver at ./drivers/dfu has been added. It allows platform and storage independent operation of DFU. It has been extended to use new MMC level of command abstraction. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadgetLukasz Majewski2012-09-01-0/+850
| | | | | | | | Support for f_dfu USB function. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu:usb: Support for g_dnl composite download gadget.Lukasz Majewski2012-09-01-0/+203
| | | | | | | | | Composite USB download gadget support (g_dnl) for download functions. This code works on top of composite gadget. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* ehci: cosmetic: Define the number of qt_buffersBenoît Thébaudeau2012-09-01-7/+8
| | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* Consolidate bootcount code into drivers/bootcountStefan Roese2012-09-01-0/+343
| | | | | | | | | | | | | | | | | | | This patch moves all bootcount implementations into a common directory: drivers/bootcount. The generic bootcount driver is now usable not only by powerpc platforms, but others as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk2012-09-01-13/+40
|\ | | | | | | | | | | | | | | | | | | | | | | | | * 'sf' of git://git.denx.de/u-boot-blackfin: sf: spansion: Add support for S25FL256S sf: winbond: fix page_size sf: stmicro: add support for N25Q128A sf: stmicro: add support N25Q128 parts sf: stmicro: support JEDEC standard two-byte signature sf: winbond: add W25Q32 cmd_spi: remove superfluous semicolon Signed-off-by: Wolfgang Denk <wd@denx.de>
| * sf: spansion: Add support for S25FL256SMichal Simek2012-08-14-0/+7
| | | | | | | | | | | | | | Add support for Spansion S25FL256S SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: fix page_sizeStephen Warren2012-08-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit a4ed3b6 "sf: inline data constants" modified winbond.c's page_size from 256 to 4096. This prevents either/both of "sf write" writing the correct data, or "sf read" from reading the correct data back. This allows U-Boot running on Compulab Tegra to upgrade itself. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support for N25Q128AMichal Simek2012-08-10-0/+6
| | | | | | | | | | | | | | Add support for Numonyx N25Q128A SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support N25Q128 partsStephan Linz2012-08-09-0/+6
| | | | | | | | | | | | | | | | | | Adds support for Numonyx's N25Q128 SPI flash. These devices are used on (among others) Avnet Spartan-6 LX9 micro-evaluation boards. Tested with "sf" commands and CONFIG_ENV_IS_IN_SPI_FLASH. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: support JEDEC standard two-byte signatureStephan Linz2012-08-09-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are more than the M25Pxx serial flashs that can be used with the stmicro driver, for example: the M25PXxx or N25Qxx serie. All these chips have burned in the original stmicro manufacture id 0x20 together with a standard two-byte signature. In preperation to support all these chips the stmicro driver have to decode the full two-byte signature. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: add W25Q32Rajeshwari Shinde2012-08-09-0/+5
| | | | | | | | | | | | | | | | | | SMDK EVT1 has a different Winbond part, added its part details to the SPI flash table. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashsHolger Brunck2012-08-13-22/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Philippe De Muyter <phdm@macqel.be> cc: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: add support for Spansion flash PPB sector protectionAnatolij Gustschin2012-08-13-0/+52
| | | | | | | | | | | | | | | | | | | | Erasing flash sectors protected with persistent protection bit (PPB) mechanism on Spansion flash chips doesn't work. Add sector protection status checking and sector lock and unlock commands to fix this. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Add support for DS1388.Kenth Eriksson2012-08-10-0/+27
|/ | | | | | | | | | Support for DS1388 is added by extending the DS1337 driver. DS1388 is similar to DS1337. The time registers are offset by 1 (due to support for hundreds of seconds), and there is no century bit. The configuration and trickle charge registers are also different. Tested on hardware with Freescale P2010 and DS1388. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com>
* sh: Add support pin function control using GPIONobuhiro Iwamatsu2012-08-08-0/+630
| | | | | | | | Renesas SH and R-Mobile set up device using PFC. This provide the framework. Most codes were brought from linux kernel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support Renesas R8A7740Hideyuki Sano2012-08-08-7/+14
| | | | | | | The serial device of R8A7740 has the same structure as SH7372 of SH, etc. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support Renesas SH73A0Nobuhiro Iwamatsu2012-08-08-7/+14
| | | | | | | The serial device of SH73A0 has the same structure as SH7372 of SH, etc. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* spi: Fix merge conflicts - MakefileMichal Simek2012-08-07-1/+0
| | | | | | | | | | | | | | | The patch "spi: tegra2: rename tegra2_spi.* to tegra_spi.*" (sha1: edffa63d3d6e76991998789f9fcbaa483731ca65) renamed tegra2_spi.c to tegra_spi.c and the patch "Merge branch 'master' of git://git.denx.de/u-boot-microblaze" (sha1: d978780b2e676c005460cd561f4f15b5220bdf49) has wrongly resolved confict. This patch fix it. Signed-off-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2012-07-31-291/+442
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-i2c: km/common: remove printfs for i2c deblocking code CONFIG: SMDK5250: I2C: Enable I2C I2C: Add support for Multi channel I2C: Modify the I2C driver for EXYNOS5 I2C: Move struct s3c24x0_i2c to a common place. EXYNOS: PINMUX: Add pinmux support for I2C EXYNOS5: define EXYNOS5_I2C_SPACING EXYNOS: Add I2C base address. EXYNOS: CLK: Add i2c clock mx6qsabrelite: add i2c multi-bus support imx-common: add i2c.c for bus recovery support i.mx53: add definition for I2C3_BASE_ADDR i.mx: iomux-v3.c: move to imx-common directory i.mx: iomux-v3.h: move to imx-common include directory iomux-v3: remove include of mx6x_pins.h mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support mxc_i2c: add bus recovery support mxc_i2c: prep work for multiple busses support mxc_i2c: add i2c_regs argument to i2c_imx_stop mxc_i2c: add retries mxc_i2c: check for arbitration lost mxc_i2c: change slave addr if conflicts with destination. mxc_i2c: don't disable controller after every transaction mxc_i2c: place i2c_reset code inline mxc_i2c: place imx_start code inline mxc_i2c: remove redundant read mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state mxc_i2c.c: code i2c_probe as a 0 length i2c_write mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write mxc_i2c: create i2c_init_transfer mxc_i2c: clear i2sr before waiting for bit mxc_i2c: create tx_byte function mxc_i2c: remove ifdef of CONFIG_HARD_I2C mxc_i2c: fix i2c_imx_stop i2c: deblock i2c bus also if accessed before realocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * I2C: Add support for Multi channelRajeshwari Shinde2012-07-31-0/+27
| | | | | | | | | | | | | | | | This adds multiple i2c channel support for I2C. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * I2C: Modify the I2C driver for EXYNOS5Rajeshwari Shinde2012-07-31-77/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the S3C I2C driver to suppport EXYNOS5. The cahnges made to driver are as follows: - I2C base address is passed as a parameter to many functions to avoid multiple #ifdef - Channel initialisation is moved to a commom funation as it is required by i2c_init. - Hardcoding for I2CCON_ACKGEN removed. - Replaced printf with debug. - Checkpatch issues resolved. - Pinmux setting will be done in board/samsung/smdk5250/smdk5250.c to avoid repeated setting of gpio lines, as it have multi bus support. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * I2C: Move struct s3c24x0_i2c to a common place.Rajeshwari Shinde2012-07-31-0/+33
| | | | | | | | | | | | | | | | | | | | struct s3c24x0_i2c is being moved to common local header file so that the same can be used by s3c series and exynos series SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-1/+1
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS supportTroy Kisky2012-07-31-0/+17
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: add bus recovery supportTroy Kisky2012-07-31-0/+26
| | | | | | | | | | | | | | | | | | Add support for calling a function that will toggle the SCL line to return the bus to idle condition. The actual toggling function is added in a later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: prep work for multiple busses supportTroy Kisky2012-07-31-21/+104
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: add i2c_regs argument to i2c_imx_stopTroy Kisky2012-07-31-12/+7
| | | | | | | | | | | | | | This is prep work for CONFIG_I2C_MULTI_BUS. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: add retriesTroy Kisky2012-07-31-9/+27
| | | | | | | | | | | | | | Retry unexpected hardware errors. This will not retry a received NAK. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: check for arbitration lostTroy Kisky2012-07-31-0/+7
| | | | | | | | | | | | | | No need to continue waiting if arbitration lost. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: change slave addr if conflicts with destination.Troy Kisky2012-07-31-0/+2
| | | | | | | | | | | | | | The i2c controller cannot be both master and slave in the same transaction. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: don't disable controller after every transactionTroy Kisky2012-07-31-15/+13
| | | | | | | | | | | | | | This helps in a multiple bus master environment which is why I also added a wait for bus idle. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: place i2c_reset code inlineTroy Kisky2012-07-31-12/+3
| | | | | | | | | | | | | | | | imx_reset is only referenced once so move to that location. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: place imx_start code inlineTroy Kisky2012-07-31-33/+20
| | | | | | | | | | | | | | | | imx_start is only referenced once so move to that location. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: remove redundant readTroy Kisky2012-07-31-1/+0
| | | | | | | | | | | | | | | | wait_for_sr_state returns i2sr on success so no need to read again. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into ↵Troy Kisky2012-07-31-51/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_for_sr_state Not using udelay gives a more accurate timeout. The current implementation of udelay in imx-common does not seem to wait at all for a udelay(1). Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> ---- V2: Added WATCHDOG_RESET as suggested by Marek Vasut add error message when stop fails mxc_i2c: code i2c_probe as a 0 length i2c_write Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c.c: code i2c_probe as a 0 length i2c_writeTroy Kisky2012-07-31-17/+8
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_writeTroy Kisky2012-07-31-3/+7
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: create i2c_init_transferTroy Kisky2012-07-31-26/+18
| | | | | | | | | | | | | | | | | | Initial code of i2c_read and i2c_write is identical, move to subroutine. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c: clear i2sr before waiting for bitTroy Kisky2012-07-31-4/+5
| | | | | | | | | | | | | | | | | | | | | | Let's clear the sr register before waiting for bit to be set, instead of clearing it after hardware sets it. No real operational difference here, but allows combining of i2c_imx_trx_complete and i2c_imx_bus_busy in later patches. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: create tx_byte functionTroy Kisky2012-07-31-58/+24
| | | | | | | | | | | | | | | | Use tx_byte function instead of having 3 copies of the code. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: remove ifdef of CONFIG_HARD_I2CTroy Kisky2012-07-31-5/+1
| | | | | | | | | | | | | | | | This is always selected when CONFIG_I2C_MXC is selected, so it adds no value. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: fix i2c_imx_stopTroy Kisky2012-07-31-1/+1
| | | | | | | | | | | | | | | | | | | | Instead of clearing 2 bits, all the other bits were set because '|=' was used instead of '&='. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2012-07-31-0/+351
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Wire up SPI driver spi: microblaze: Adds driver for Xilinx SPI controller microblaze: intc: Clear interrupt code microblaze: Call serial multi initialization microblaze: Move __udelay implementation microblaze: Remove extern from board.c microblaze: Wire up dts configuration fdt: Add board specific dts inclusion microblaze: Move individual board linker scripts to common script in cpu tree. microblaze: Add gpio.h microblaze: Add missing undefs for UBI and UBIFS microblaze: Expand and correct configuration comments microblaze: Enable ubi support microblaze: Avoid compile error on systems without cfi flash microblaze: Remove wrong define CONFIG_SYS_FLASH_PROTECTION Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | spi: microblaze: Adds driver for Xilinx SPI controllerStephan Linz2012-07-31-0/+350
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an improved version of the driver patch original submitted by Graeme Smecher <graeme.smecher@mail.mcgill.ca> The changes are: - remove hard coded Xilinx BSP defines (XPAR_SPI_*) and use CONFIG_SYS_SPI_BASE from config.h instead - add extensive register struct definitions - remove offset calculation for register access and use the new register struct instead - move default SPI controller configuration from spi_setup_slave() to spi_claim_bus() - add spi_set_speed() - insert SPI controller deactivation in spi_release_bus() - protect while loops in spi_xfer() with counter / timeouts - support SPI mode flags: LSB_FIRST, CPHA, CPOL, LOOP Come from: http://patchwork.ozlabs.org/patch/71797/ Signed-off-by: Stephan Linz <linz@li-pro.net> Tested-by: Michal Simek <monstr@monstr.eu>
* | | sf: stmicro: add geometrical info for N25Q256 from MicronJérôme Carretero2012-04-08-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Note: because 4-byte addressing is not supported yet, at the moment only the first 16MiB of the device are available. Signed-off-by: Jérôme Carretero <cJ@zougloub.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-10 00:39:12 +0000