summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* drivers/crypto/fsl: enable raw data instead of von Neumann dataAlex Porosanu2015-08-03-1/+10
| | | | | | | | | | | | The sampling of the oscillator can be done in multiple modes for generating the entropy value. By default, this is set to von Neumann. This patch changes the sampling to raw data, since it has been discovered that the generated entropy has a better 'quality'. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Acked-by: Ruchika Gupta<ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/crypto/fsl: disable RNG oscillator maximum frequency checkAlex Porosanu2015-08-03-2/+2
| | | | | | | | | | | | | | | | | The rtfrqmax & rtfrqmin set the bounds of the expected frequency of the oscillator, when SEC runs at its maximum frequency. For certain platforms (f.i. T2080), the oscillator is very fast and thus if the SEC runs at a lower than normal frequency, the ring oscillator is incorrectly detected as being out of bounds. This patch effectively disables the maximum frequency check, by setting a high enough maximum allowable frequency for the oscillator. The reasoning behind this is that usually a broken oscillator will run too slow (i.e. not run at all) rather than run too fast. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Acked-by: Ruchika Gupta<ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/qe: use strncpy instead of strcpyZhao Qiang2015-08-03-1/+1
| | | | | | | strncpy is safer than strcpy, use it to instead of strcpy. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* drivers/qe: transform parameter to compatible typeZhao Qiang2015-08-03-2/+3
| | | | | | | | when using printf, the parameter type need to be compatible type, so transform them to compatible type Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl_esdhc.c: Always make check_and_invalidate_dcache_range availableTom Rini2015-08-02-2/+0
| | | | | | | This function is called from esdhc_send_cmd so we need it available to everyone. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-27/+139
|\
| * mxc: gpio add i.MX6UL supportPeng Fan2015-08-02-0/+4
| | | | | | | | | | | | i.MX6UL does not have GPIO6/7, so do not include them for i.MX6UL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * sf: kconfig: add kconfig options for spi flashesNikita Kiryanov2015-08-02-0/+44
| | | | | | | | | | | | | | | | | | | | Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig. Cc: Jagan Teki <jteki@openedev.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * usb: kconfig: create a menu for usbNikita Kiryanov2015-08-02-0/+2
| | | | | | | | | | | | | | | | | | | | With recent additions to USB Kconfig the number of USB options had grown large enough to warrant a separate menu for USB. Add a Kconfig menu for USB. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * usb: kconfig: usb keyboard kconfigNikita Kiryanov2015-08-02-0/+27
| | | | | | | | | | | | | | | | | | | | Add Kconfig options for USB keyboard and use them for cm-fx6. Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig optionNikita Kiryanov2015-08-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb config to defconfig. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * mmc:fsl_esdhc invalidate dcache before readPeng Fan2015-07-26-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DCIMVAC is upgraded to DCCIMVAC for the individual processor (Cortex-A7) that the DCIMVAC is executed on. We should follow the linux dma follow. Before DMA read, first invalidate dcache then after DMA read, invalidate dcache again. With the DMA direction DMA_FROM_DEVICE, the dcache need be invalidated again after the DMA completion. The reason is that we need explicity make sure the dcache been invalidated thus to get the DMA'ed memory correctly from the physical memory. Any cache-line fill during the DMA operations such as the pre-fetching can cause the DMA coherency issue, thus CPU get the stale data. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * power: pmic: Add support for MAX77696 PMICFabio Estevam2015-07-26-0/+33
| | | | | | | | | | | | Add support for MAX77696 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-07-17-1044/+445
| |\
| * | thermal: imx_thermal: fix busywait if IMX6 temp <0CTim Harvey2015-07-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The temperature calculation must be typecasted to keep the compiler from sign extending a negative value prior to division. This fixes an issue where if the CPU temperature is <0C it will get stuck in the busywait loop until the CPU heats up to 0C. Cc: Ye Li <b37916@freescale.com> Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | i2c: fix vf610 supportAlbert ARIBAUD \(3ADEV\)2015-07-10-1/+2
| | | | | | | | | | | | | | | | | | | | | Add support in mxc_i2c driver, iomux_v3 and vf610 architecture for the four I2C instances available in VF610. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | net: fec_mxc: remove useless struct nbufAlbert ARIBAUD \(3ADEV\)2015-07-10-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | This locally defined struct is actually only used once and as an opaque type. Remove it for clarity. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | thermal:imx_thermal: enter busywait cooling loop when over max CPU tempTim Harvey2015-07-10-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the check for temperature being within the min/max range and enter the busywait cooling loop whenever the CPU temperature is over the critical temp. This fixes the issue where if a board was booted at a temp greater than the CPU temperature max, it would skip the loop and never indicate or try to address the overtemp issue. Cc: Ye Li <b37916@freescale.com> Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-07-29-10/+49
|\ \ \
| * | | ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-28-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | mmc: tegra: Build warning fixes for 64-bitThierry Reding2015-07-27-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | i2c: tegra: Build warning fixes for 64-bitThierry Reding2015-07-27-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | dfu: fix 64-bit compile warningsStephen Warren2015-07-27-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use %p to print pointers. The max value of (i_buf - i_buf_start) should be dfu_buf_size, which is an unsigned long, so cast the pointer difference to that type to print. Change-Id: Iee242df9f8eb091aecfe0cea4c282b28b547acfe Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | | dm: pci: Support bridge device configuration correctlyBin Meng2015-07-28-18/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit aec241d "dm: pci: Use the correct hose when configuring devices" was an attempt to fix pci bridge device configuration, but unfortunately that does not work 100%. In pciauto_config_devices(), the fix tried to call pciauto_config_device() with a ctlr_hose which is supposed to be the root controller hose, however when walking through a pci topology with 2 or more pci bridges this logic simply fails. The call chain is: pciauto_config_devices()->pciauto_config_device() ->dm_pci_hose_probe_bus(). Here the call to dm_pci_hose_probe_bus() does not make any sense as the given hose is not the bridge device's hose, instead it is either the root controller's hose (case#1: if it is the 2nd pci bridge), or the bridge's parent bridge's hose (case#2: if it is the 3rd pci bridge). In both cases the logic is wrong. For example, for failing case#1 if the bridge device to config has the same devfn as one of the devices under the root controller, the call to pci_bus_find_devfn() will return the udevice of that pci device under the root controller as the bus, but this is wrong as the udevice is not a bus which does not contain all the necessary bits associated with the udevice which causes further failures. To correctly support pci bridge device configuration, we should still call pciauto_config_device() with the pci bridge's hose directly. In order to access valid pci region information, we need to refer to the root controller simply by a call to pci_bus_to_hose(0) and get the region information there in the pciauto_prescan_setup_bridge(), pciauto_postscan_setup_bridge() and pciauto_config_device(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | | dm: pci: Pass only device/function to pci_bus_find_devfn()Bin Meng2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In dm_pci_hose_probe_bus(), pci_bus_find_devfn() is called with a bdf which includes a bus number, but it really should not as this routine only expects a device/function encoding. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | | dm: pci: Use complete bdf in all pci config read/write routinesBin Meng2015-07-28-27/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently pci_bus_read_config() and pci_bus_write_config() are called with bus number masked off in the parameter bdf, and bus number is supposed to be added back in the bridge driver's pci config read/write ops if the device is behind a pci bridge. However this logic only works for a pci topology where there is only one bridge off the root controller. If there is addtional bridge in the system, the logic will create a non-existent bdf where its bus number gets accumulated across bridges. To correct this, we change all pci config read/write routines to use complete bdf all the way up to the root controller. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | | dm: pci: Correct primary/secondary/subordinate bus number assignmentBin Meng2015-07-28-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In driver model, each pci bridge device has its own hose structure. hose->first_busno points to the bridge device's device number, so we should not substract hose->first_busno before programming the bridge device's primary/secondary/subordinate bus number registers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-07-28-9/+21
|\ \ \ \
| * | | | spi: zynq_spi: Simplify debug macroMichal Simek2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | net: gem: Extend timeout valueMichal Simek2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend time for MDIO. (Because of zed board) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | spi: Fix zynq SPI bindingMichal Simek2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zynq is using Cadence IP where binding is documented in the Linux kernel and there is no reason to use different binding. Synchronize it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynq: gem: Setting up WRAP bit for one TX bdMichal Simek2015-07-28-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting up WRAP bit to indicate that this is the last TX BD in the chain. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynq: gem: Increase the Rx buffer descriptors to 32Siva Durga Prasad Paladugu2015-07-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the Rx Buffer descriptors to 32. This will avoid Rx buffer descriptors overflow if more packets were received at one shot before we process the received ones. This fixes the issue of intermittent timeouts during tftp on a 1Gb connection with tftp server running on windows. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynqmp: gem: Flush the rx buffers while transmittingSiva Durga Prasad Paladugu2015-07-28-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flush and invalidate the rx buffers while sending the tx packet it self as armv8 does flush also while doing invalidation. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | zynqmp: gem: Set data bus width to 64bit for arm64Siva Durga Prasad Paladugu2015-07-28-1/+8
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the data bus width to 64-bit AMBA Databus width in config register. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | | keystone2: net: add mcast function to keyston2 Ethernet driverVitaly Andrianov2015-07-27-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MCAST_TFTP support requires that network drivers has mcast functon implemented. This commit adds dummy keystone2_eth_bcast_addr() to meet the requirement. As far as the driver doesn't use ALE and doesn't filter any incoming packets, the function is empty. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | | misc: led: pca9551_led: Fix problem with multiple blink frequenciesStefan Roese2015-07-27-10/+22
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only 2 frequencies are supported. The current driver implementation does not always use the 2 last configured blink frequencies. This patch fixes this problem. So that the last two entered frequencies are active. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-25-20/+119
|\ \ \
| * | | sunxi: musb: Stop treating not having a vbus-det gpio as an errorHans de Goede2015-07-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some boards the otg is wired up in host-only mode in this case we have no vbus-det gpio. Stop logging an error from sunxi_usb_phy_vbus_detect() in this case, and stop treating sunxi_usb_phy_vbus_detect() returning a negative errno, as if a charger is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: musb: Improve output during probingHans de Goede2015-07-25-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we return an error the usb core will print an error-message, so in this case do not print anything. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ian.campbell@citrix.com>
| * | | sunxi: musb: Use device-model for musb host modeHans de Goede2015-07-25-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the sunxi musb glue to use the device-model for musb host mode. This allows using musb in host mode together with other host drivers such as ehci / ohci, which is esp. useful on boards which use the musb controller in host-only mode, these boards have e.g. an usb-a receptacle or an usb to sata converter attached to the musb controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede2015-07-25-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: musb: Add id pin supportHans de Goede2015-07-25-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When in host mode check if there is a host cable inserted into the otg port by checking the id pin. If there is no host cable return an error to make usb_lowlevel_init() exit early, rather then waiting for 1 second for a device which will never show up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: musb: Move vbus check to sunxi_musb_enableHans de Goede2015-07-25-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This way it can be re-checked on "usb reset". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Create helper function veryfing valid boot signature on MMCDaniel Kochmański2015-07-24-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extracts checking for valid SD card "eGON.BT0" signature from `board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`. Buffer for mmc sector is allocated and freed at runtime. `panic` is triggered on malloc failure. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | mmc: Protect `mmc_initialize` from initialising mmc multiple timesDaniel Kochmański2015-07-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `mmc_initialize` might be called multiple times leading to the mmc-controllers being initialised twice, and initialising the `mmc_devices` list head twice which may lead to memory leaks. Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu> CC: Roy Spliet <r.spliet@ultimaker.com> Cc: Ian Campbell <ijc@hellion.org.uk> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | | Merge git://git.denx.de/u-boot-usbTom Rini2015-07-24-286/+346
|\ \ \ \ | |/ / / |/| | |
| * | | usb: ci_udc: fix request allocation when endpoints are disabledRob Herring2015-07-24-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ci_udc driver request allocation assumes that the endpoint descriptor pointer is set to retrieve the endpoint number, but that is only true when the endpoint is enabled. This results in a NULL ptr dereference which for me happens to return 0 value. This causes the EP0 request struct to be returned for other endpoints. Some gadget drivers like fastboot and USB MS work fine, but ethernet does not. Really, the ci_udc driver is the oddball here doing this EP0 special case handling Stephen added. All the other drivers alloc/free functions are pretty much the same with the only variation being the size of the private struct. This could all be consolidated to a common function. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marek Vasut <marex@denx.de> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | | ci_udc: fix 64-bit compile warningsStephen Warren2015-07-23-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the same as f72d8320b605 "usb: ci_udc: fix warnings on 64-bit builds", but more. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | usb: ehci-marvell: Drop wrl accessor functionStefan Roese2015-07-22-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the wrl accessor function from the Marvell EHCI driver by replacing it with the writel function. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-09-19 21:04:17 +0000