summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* ENGR00325255 pcie:enable pcie support on imx6sx sdYe Li2017-04-05-1/+71
| | | | | | | | | | | | | | | | | Enable pcie support in uboot on imx6sx sd boards - enable_pcie_clock should be call before ssp_en is set, since that ssp_en control the phy_ref clk gate, turn on it after the source of the pcie clks are stable. - add debug info - add rx_eq of gpr12 on imx6sx - there are random link down issue on imx6sx. It's pcie ep reset issue. solution:reset ep, then retry link can fix it. (cherry picked from commit ec78595a24b5ff1020baa97b6d6e79a3a3326307) Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 81fd30250110d72992758f08b66c07306126892b)
* MLK-12452-1 FEC: Update fec driver to support two MDIOYe Li2017-04-05-1/+24
| | | | | | | | | | | | | | | | | | | | On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. Some boards share the MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. Without defining this configuration, the enet will uses own MDIO port. Also add this configurationfor FEC DM driver, since the ENET PHY currently does not support FDT. Modify the dev_id for DM driver, the first fec will set dev_id with 0, while second fec sets the dev_id with 1. So the MII bus name won't be duplicated. Then we can add two FEC devices from DTB. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 088afc073c480bd02208145bfb04259ccdf391c1)
* ENGR00315894-81 gis: Add gis moduleYe.Li2017-04-05-0/+579
| | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) (cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2) (cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
* ENGR00315894-80 pxp: Add pxp moduleYe.Li2017-04-05-0/+324
| | | | | | | | | | | | Add pxp module. Support csc between YUV444 and RGB888 and scaling. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 4c6e1f9ed1b2f5c98a34502b44b6414593fdd290) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 92295fafcdbaa3a3fe0a63ede15f896dfc9ce0b0) (cherry picked from commit 096a63e81a8c78b3f8bbc65a9d418aa032d62231)
* ENGR00315894-79 csi: Add csi moduleYe.Li2017-04-05-0/+425
| | | | | | | | | | | Add csi module. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 854ae26758ec8132ef749b98645dd2f43b84e5e2) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 5f133bd9420109951fd03bd5168801327e929c3b) (cherry picked from commit 16960e59fa3334162d2e2212ee4bc1e7f0c420a3)
* ENGR00315894-78 vadc: Add vadc moduleYe.Li2017-04-05-0/+603
| | | | | | | | | | | | Add vadc module. Both PAL and NTSC mode can work. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 03c31ae30c1e81c99f6824221e4801433445e04a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit b5d776ffc1519c16091736445b3217ffb7fcd7db) (cherry picked from commit 2377eb9fd299b76888f11faf76383b68e77bcc8a)
* MLK-10655 Video: Fix second line string display issueYe.Li2017-04-05-4/+5
| | | | | | | | | | | | The string display on second line repeats the last word of first line and does not show full. This is the bug introduced by the fixing to MLK-10542. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ac430cee8c42f0acad9e126631d772b99f1166ea) (cherry picked from commit ff62c5b275a9b5e47d570d3eb10622799bf12070) (cherry picked from commit bd265a064c8f797e542955352d170e7f20f7b0d1) (cherry picked from commit aaa55881de3e9aa8232c819a2c8a3abb285b682f)
* MLK-10542 video: Support multiple lines version string displayYe.Li2017-04-05-7/+23
| | | | | | | | | | | | | | The caculation of left space for version string is not correct, should use VIDEO_COLS not VIDEO_LINE_LEN / 2, otherwise we will get larger space than actual have and cause string to overlay logo picture. Also current version string display only supports two lines words at max. This also causes overlay when the LCD pixel colume size is not enough. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ed53487d36a886fb4557088804a4b5232b168889) (cherry picked from commit 253936bb920c5bb8e7d26e0425d155fb2576ab77) (cherry picked from commit a12ec4c29b4cbdf03ae68a5ecb739253f79b59fc)
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2017-04-05-10/+61
| | | | | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit d7f49b9378547c3a57b96bcdb907fc44616beb3d) (cherry picked from commit e1343191b9de227c582847e7eeb5ce9238be0754)
* MLK-12425-2: video: epdc: introduce epdc supportPeng Fan2017-04-05-0/+478
| | | | | | | | | | | | | | | | | | | | | | | | | Support EPDC. E-Ink feature is supported by i.MX6DL/SL and i.MX7D. For now this driver only supports i.MX6DL/SL, because the i.MX7D EPDC driver needs pxp support which is not included in U-Boot. Support user defined logo file, if there is no logo file, it will draw a black border around a white screen. If need to enable EPDC, a waveform file is required to let all work. Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME support. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a7244f279cc3c3994bcd103f5e9a183b1075ae71)
* MLK-11952 Video: IPU: Fix dereferencing NULL pointer problemYe.Li2017-04-05-0/+4
| | | | | | | | | | By Coverity check, the clk_set_rate function dereferences the clk pointer without checking whether it is NULL. This may cause problem when clk is NULL. Fix the problem by adding NULL check. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ded2f2958d568411274eeecd265fcc1181638335) (cherry picked from commit b58ac1502391d87470918ff8d172b2b8dc1e7a68)
* MLK-10747-2 video: ipu: Enable/disable LDB_DI clock when necessaryLiu Ying2017-04-05-8/+67
| | | | | | | | | This patch adds enable/disable hooks support for ldb_di[0/1] clocks and enables/disables them when necessary. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 615d4c51679a6c2ee0ed4c5e3922eec76646eef1) (cherry picked from commit 152192507c3bbaba093783d7da32b88327705c63)
* MLK-10747-1 video: ipu: Build ldb_di clock relevant code only for MX6 and MX53Liu Ying2017-04-05-1/+13
| | | | | | | | | The LDB is found in MX6 variants and MX53, so this patch makes the ldb_di clock relevant code be built only for them. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 3e40c7466ae7d1d6ca74011bfe69ae059d412a3b) (cherry picked from commit 0c47d4138fd2fe8aa864160e23428b2ef95f16ae)
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2017-04-05-1/+1
| | | | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5028519b434d5dfbe53c48ac4b115ff8b69bbac7) (cherry picked from commit 8dcbd43b971616fb67dc3b2af32e2d33f68ed0ce)
* MLK-12865 Nand: Fix BCH debug1 register access issueYe Li2017-04-05-1/+1
| | | | | | | Should have "&" to access the register address, otherwise uboot will hang. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 0b65071afaae9d6a49fb7dda2902f5c8bcd678c2)
* MLK-12693-2 nand: mxs: correct bitflip for erased NAND pagePeng Fan2017-04-05-1/+18
| | | | | | | | | | | | | | | | | | | | This patch is a porting of http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38 " i.MX6QP and i.MX7D BCH module integrated a new feature to detect the bitflip number for erased NAND page. So for these two platform, set the erase threshold to gf/2 and if bitflip detected, GPMI driver will correct the data to all 0xFF. Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q with the one for i.MX6QP. " In this patch, i.MX6UL is added and threshold changed to use ecc_strength. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 489929be0221bb7d4c46bb5bc6083650b78f73e0) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12693-1 nand: mxs: fix the bitflips for erased page when uncorrectable errorPeng Fan2017-04-05-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is porting from linux: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_4.1.15_1.0.0_ga&id=3d42fcece496224fde59f9343763fb2dfc5b0768 " We may meet the bitflips in reading an erased page(contains all 0xFF), this may causes the UBIFS corrupt, please see the log from Elie: ----------------------------------------------------------------- [ 3.831323] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry [ 3.845026] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry [ 3.858710] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry [ 3.872408] UBI error: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read 16384 bytes ... [ 4.011529] UBIFS error (pid 36): ubifs_recover_leb: corrupt empty space LEB 27:237568, corruption starts at 9815 [ 4.021897] UBIFS error (pid 36): ubifs_scanned_corruption: corruption at LEB 27:247383 [ 4.030000] UBIFS error (pid 36): ubifs_scanned_corruption: first 6569 bytes from LEB 27:247383 ----------------------------------------------------------------- This patch does a check for the uncorrectable failure in the following steps: [0] set the threshold. The threshold is set based on the truth: "A single 0 bit will lead to gf_len(13 or 14) bits 0 after the BCH do the ECC." For the sake of safe, we will set the threshold with half the gf_len, and do not make it bigger the ECC strength. [1] count the bitflips of the current ECC chunk, assume it is N. [2] if the (N <= threshold) is true, we continue to read out the page with ECC disabled. and we count the bitflips again, assume it is N2. (We read out the whole page, not just a chunk, this makes the check more strictly, and make the code more simple.) [3] if the (N2 <= threshold) is true again, we can regard this is a erased page. This is because a real erased page is full of 0xFF(maybe also has several bitflips), while a page contains the 0xFF data will definitely has many bitflips in the ECC parity areas. [4] if the [3] fails, we can regard this is a page filled with the '0xFF' data. " Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit ceb324a2914487aa517a6c70a06a20b5e3438fda)
* MLK-12603: mtd: gpmi: may use legacy bch geometry in u-bootHan Xu2017-04-05-0/+13
| | | | | | | | | | | | provide one config "CONFIG_NAND_MXS_BCH_LEGACY_GEO" to keep using legacy bch geometry. NOTICE: the feature must be enabled/disabled in both u-boot and kernel. Signed-off-by: Han Xu <han.xu@nxp.com> (cherry picked from commit 0abc9c182c24f88522bd74fa1b53cd2fa3477184) (cherry picked from commit 772af34b1216acc8e6a1a3faf43fef7c90b26a2f) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12214 NAND:apbh_dma: Fix logically dead code issueYe.Li2017-04-05-3/+3
| | | | | | | | | | | The list_first_entry always assumes the list is not empty, it won't return NULL pointer when the list is empty. So the "if (pdesc == NULL)" becomes a dead code. Fix the issue by calling the list_empty before the list_first_entry. (Coverity CID 29934) Signed-off-by: Ye.Li <ye.li@nxp.com> (cherry picked from commit ff3923f294cc2e15f436d7520b4042736b1b48a6)
* MLK-11718-2: mtd: nand: change the BCH layout setting for large oob NANDHan Xu2017-04-05-38/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | The cod change updated the NAND driver BCH ECC layout algorithm to support large oob size NAND chips(oob > 1024 bytes). Current implementation requires each chunk size larger than oob size so the bad block marker (BBM) can be guaranteed located in data chunk. The ECC layout always using the unbalanced layout(Ecc for both meta and Data0 chunk), but for the NAND chips with oob larger than 1k, the driver cannot support because BCH doesn’t support GF 15 for 2K chunk. The change keeps the data chunk no larger than 1k and adjust the ECC strength or ECC layout to locate the BBM in data chunk. General idea for large oob NAND chips is 1.Try all ECC strength from the minimum value required by NAND spec to the maximum one that works, any ECC makes the BBM locate in data chunk can be chosen. 2.If none of them works, using separate ECC for meta, which will add one extra ecc with the same ECC strength as other data chunks. This extra ECC can guarantee BBM located in data chunk, of course, we need to check if oob can afford it. Signed-off-by: Han Xu <b45815@freescale.com> (cherry picked from commit 78f620a6d6ab44bd34e42f00abe4673db099ca73)
* ENGR00315894-60 GPIO: Modify driver mxc_gpio to support RDC SemaphoresYe.Li2017-03-14-0/+53
| | | | | | | | | | | | | | | | | | | | | | For GPIO group which shared by multiple masters, it may set in RDC to shared and semaphore required. Before access the GPIO register, the GPIO driver must get the RDC semaphore, and release the semaphore after the GPIO register access. When CONFIG_MXC_RDC is set, the features related to RDC semaphores is enabled in mxc_gpio driver. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 84d63e2e2ce12f714e88baad8b2325684614a7c1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: drivers/gpio/mxc_gpio.c (cherry picked from commit c9943b9c8a78bb2c9886bfe582e82978387d8dee) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit faf94726cac8316c4342e19936f1e03ef283ace3) (cherry picked from commit 6c0474fe0e4fc543c62b22c05c2702a881f56418)
* MLK-13440-5 fsl_usdhc: Remove the CONFIG_SYS_FSL_ESDHC_FORCE_VSELECTYe Li2017-03-14-4/+0
| | | | | | | | | | Since we have added the "vs18_enable" parameter for fixed 1.8v I/O, remove the CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT. This configuration can only work with one MMC device. If more devices are supported, this will set 1.8v to all controllers, so will cause problem to 3.3v devices. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit c1de6a58e44f4770b32a41e3689884abf7449e1b)
* MLK-13440-1: fsl_usdhc: Add configuration parameter for using fixed 1.8V I/OYe Li2017-03-14-0/+20
| | | | | | | | | | | | | | | | | | When using eMMC with 1.8V I/O, we have to set the VSELECT bit at this USDHC controller setup and init. The CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT has problem that it will apply to all USDHC controllers and it only set the 1.8V at init phase. So if user does not select to the eMMC device, the voltage on the I/O pins are not correct. This patch adds a parameter "vs18_enable" in fsl_esdhc_cfg structure and priv data, so each controller can have different settings. The default value is 0 for 3.3V, which is compatible with current codes. When setting this value to 1, at USDHC setup and init phase the driver will set the VSELECT bit. For DM driver, the vqmmc-supply property will be searched for current usdhc node. If the vqmmc-supply is set to 1800000 uV, the vs18_enable in priv data will be set to 1. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit ebd872f491af27c38a0698d226222ea5093c563c)
* MLK-14423-2 gpio: 74x164: make oe-pins optionalPeng Fan2017-03-14-2/+1
| | | | | | | Make oe-pins optional because some boards have fixed it to enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14423-1 spi: kconfig: add soft spi Kconfig entryPeng Fan2017-03-14-0/+6
| | | | | | | | Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-11035 imx: mx6 update thermal slope factorsPeng Fan2017-03-14-2/+2
| | | | | | | | | | | | | | | | | | | | | From temp sensor guys: " I confirmed the math with him(had do the accuracy study) today. The new, final equation is: Tmeas = (Nmeas - n1) / slope + t1 + offset n1= fused room count t1= 25 offset=3.580661 slope= 0.4148468 – 0.0015423*n1 " 87723f903454aaf17336e0fe9098ea7911c19f3c update the thermal with not accurate slope parameters. This patch fix it. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 0d4904f5929cecd66f0b60cf8ebdcb0e6a2f733e)
* MLK-10827 imx: mx6 update thermal driver according new equationPeng Fan2017-03-14-17/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From IC guys: " After a thorough accuracy study of the Temp sense circuit, we found that with our current equation, an average part can read 7 degrees lower than a known forced temperature. We also found out that the standard variance was around 2C; which is the tightest distribution that we could create. We need to change the temp sense equation to center the average part around the target temperature. Old Equation: Temp = Troom,cal – slope*(Count measured – Count room fuse) Where Troom,cal = 25C and Slope = 0.4297157 – (0.0015974 * Count room fuse) New Equation: Temp = Troom,cal – slope*(Count measured – Count room fuse) +offset Where Troom,cal = 25C and Slope = 0.4445388 – (0.0016549 * Count room fuse) Offset = 3.580661 " According the new equation, update the thermal driver. c1 and c2 changed to u64 type and update comments. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 87723f903454aaf17336e0fe9098ea7911c19f3c) (cherry picked from commit 3392203fc3ae2f0701461143094cfbb112f7bc04)
* sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0Rask Ingemann Lambertsen2017-03-09-1/+1
| | | | | | | | | | | | | | | | | | | | | The execution flow is currently like this for aldo_num == 1 or 2: int axp_set_aldo(int aldo_num, unsigned int mvolt) { ... if (mvolt == 0) return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); ... return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); } I.e. aldo1 and aldo2 will always be disabled. This patch fixes it by setting (rather than clearing) the enable bit when mvolt != 0. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Fixes: 795857df413a ("sunxi: power: add AXP809 support")
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2017-03-08-5/+5
|\
| * video: cfb_console: fix 32-bit display on 64-bit architecturesAndre Przywara2017-03-07-5/+5
| | | | | | | | | | | | | | | | | | | | | | "unsigned long" is a lousy data type when it comes to match peripheral hardware registers with a fixed size. Just do the obvious and match a 32-bit display format with an "u32" data type for casting. This fixes the logo display on 64-bit architectures, which produced a black line on the right side of the logo with non-black backgrounds. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* | net: zynq_gem: Fix masking of supported phydev featuresNathan Rossi2017-03-07-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | When the zynq_gem driver initializes the phy it sets the supported features that the phy can support and advertise. However instead of masking the supported features such that it limits the available features it sets the phy to have the exact supported features of the zynq_gem. This is problematic as it will enable features that a phy does not have or cannot advertise. Specifically this appears as an issue when using a phy that is only capable of 10/100, but the zynq_gem driver will override this and try to enable and advertise 10/100/1000. Reported-by: Arno Steffens <star@gmx.li> Fixes: 80243528ef ("net: gem: Fix gem driver on 1Gbps LAN") Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Arno Steffens <star@gmx.li> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* net: macb: Fix ETH not found when clock not supportWenyou Yang2017-03-01-4/+9
| | | | | | | | | | | | | For the boards such as smartweb on which the clock driver isn't supported, the ethernet fail to be found when booting up with the below log. ---8<--- Net: No ethernet found. --->8--- Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/net/Kconfig: Correct use of apostropheTom Rini2017-02-27-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-02-27-1/+1
|\
| * mtd: nand: build MXS driver for MX7 as wellAndrey Yurovsky2017-02-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | The i.MX7 has the same GPMI controller as i.MX6 and is covered by the MXS driver. Tell Kconfig that we can use this driver on the MX7 platform (the MXS driver already has the few i.MX7-specific changes needed for basic operation and the board itself sets the pinmux correctly). Tested on i.MX7D with the Sabre board and a NAND Flash soldered to U12. Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
* | rockchip: video: fix 83500000 clock mistake in rockchip HDMINickey Yang Nickey Yang2017-02-27-1/+1
| | | | | | | | | | | | | | There is one "0" too many in 83500000 mpixelclock in rockchip_mpll_cfg[]. fix it. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2017-02-26-38/+40
|\ \
| * | usb: gadget: f_dfu: set serial number if serial# is validFelipe Balbi2017-02-26-0/+5
| | | | | | | | | | | | | | | | | | | | | With this patch, USB Command Verifier is happy with our DFU implementation on Chapter 9 tests. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: g_dnl: fix g_dnl_set_serialnumber()Felipe Balbi2017-02-26-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | instead of only copying if strlen(s) is less than 32 characters, let's just copy at most 31 characters regardless of the size of serial#. This will guarantee that we always have a serial number if serial# environment variable is set to anything. Note that without a proper serial number, USB Command Verifier fails our test of Device Descriptor since we will claim to have a serial number without really providing one when requested. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * | usb: gadget: f_dfu: write req->actual bytesFelipe Balbi2017-02-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | If last packet is short, we shouldn't write req->length bytes to non-volatile media, we should write only what's available to us, which is held in req->actual. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
| * | usb: gadget: dfu: add result for handle_getstatus()Patrick Delaunay2017-02-26-22/+13
| | | | | | | | | | | | | | | | | | | | | | | | harmonize result with other handle_XXX() functions: return int for size remove the define RET_STAT_LEN : no more necessary Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
| * | usb: gadget: dfu: correct size for USB_REQ_DFU_GETSTATE resultPatrick Delaunay2017-02-26-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return the correct size for DFU_GETSTATE result (1 byte in DFU 1.1 spec) to avoid issue in USB protocol and the variable "value" is propagated to req->lenght as all the in the other request with answer - DFU_GETSTATUS - DFU_DNLOAD - DFU_UPLOAD Then the buffer is correctly treated in USB driver NB: it was the only request witch directly change "req->actual" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
| * | usb: gadget: dfu: add functional descriptor in descriptor setPatrick Delaunay2017-02-26-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "DFU descriptor set" must contain the "DFU functional descriptor" but it is missing today in U-Boot code (cf: DFU spec 1.1, chapter 4.2 DFU Mode Descriptor Set) This patch only allocate buffer and copy DFU functional descriptor after interfaces. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
| * | usb: dwc3: gadget: Remove unused header inclusionVincent Tinelli2017-02-26-1/+0
| | | | | | | | | | | | | | | | | | | | | Remove sys_proto.h inclusion which is not used by the driver. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* | | pinctrl: uniphier: support pin configurationMasahiro Yamada2017-02-23-12/+134
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the following DT properties: "bias-disable" "bias-pull-up" "bias-pull-down" "bias-pull-pin-default" "input-enable" "input-disable" My main motivation is to support pull up/down biasing. For Pro5 and later SoCs, the pupdctrl register number is the same as the pinmux number, so this feature can be supported without having big pin tables. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | video: mxsfb: Fix reset hang when videomode variable is not presentFabio Estevam2017-02-22-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | Currently the system hangs when the 'videomode' variable is not present and a reset command is issued: => setenv videomode => saveenv => reset (Board hangs) lcdif_power_down() assumes that the LCDIF controller has been properly configured and enabled, which may not be true. To fix this issue check whether panel.frameAdrs has been initialized and in case it has not been initialized, do not continue with the LCDIF powerdown sequence. Tested on a imx7dsabresd board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* fsl_i2c.c: Fix warning on gcc-6.xTom Rini2017-02-17-2/+2
| | | | | | | | | | | | | With gcc-6.x we see: drivers/i2c/fsl_i2c.c:86:3: warning: ‘fsl_i2c_speed_map’ defined but not used [-Wunused-const-variable=] The easy way to fix this is that since we only use fsl_i2c_speed_map at all on __M68K__ move the existing guards around slightly. Reported-by: Thomas Schaefer <Thomas.Schaefer@kontron.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: sandbox: remove code snippet from Kconfig helpMasahiro Yamada2017-02-13-22/+1
| | | | | | | | | | | | | | | With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* flash: complete CONFIG_SYS_NO_FLASH move with renamingMasahiro Yamada2017-02-12-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2017-02-09-1/+1
|\
generated by cgit v1.1 at 2024-11-07 21:05:51 +0000