summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* spl: add USB Gadget config optionStefan Agner2016-11-28-4/+4
| | | | | | | | | Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
* spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner2016-11-28-2/+9
| | | | | | | | | | | | | | | | The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* bootcounter_ram: Fix misaligned cache warningStefan Roese2016-11-28-1/+2
| | | | | | | | | | This patch fixes the warning about misaligned cache on Armada XP: CACHE: Misaligned operation at range [7ffff000, 7fffffac] Signed-off-by: Stefan Roese <sr@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sun8i_emac: Fix mdio read sequencePhilipp Tomsich2016-11-28-1/+1
| | | | | | | | | | | | | | To send a parametrized command to the PHY over MDIO, we should write the data first, the trigger the execution by the command register write. Fix the access pattern in our MDIO write routine. Apparently this doesn't really matter with the Realtek PHY on the Pine64, but other PHYs (which require more setup) will choke on the wrong order. [Andre: add commit message] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
* mtd: nand: add support for the TC58NVG2S0H chipBoris Brezillon2016-11-28-0/+3
| | | | | | | | | | Add the description of the Toshiba TC58NVG2S0H SLC nand to the nand_ids table so we can use the NAND ECC infos and the ONFI timings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-11-26-28/+141
|\
| * rockchip: video: Avoid using u8 in the HDMI driverSimon Glass2016-11-25-15/+15
| | | | | | | | | | | | | | | | It makes not sense using u8 to hold a value on a 32-bit or 64-bit machine. It can only bloat the code by forcing the compiler to mask the value. Change it to uint. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: clk: Support setting ACLKSimon Glass2016-11-25-0/+7
| | | | | | | | | | | | | | | | Add basic support for setting the ARM clock, since this allows us to run at maximum speed in U-Boot. Currently only a single speed is supported (1.8GHz). Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Check for device in useSimon Glass2016-11-25-0/+9
| | | | | | | | | | | | | | | | | | | | Check whether a display device is in use before using it. Add a comment as to why two displays cannot currently be used at the same time. This allows us to remove the device-tree change that disables vopb on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Track whether a display is in useSimon Glass2016-11-25-1/+17
| | | | | | | | | | | | | | Mark a display as in use when display_enable() is called. This can avoid a display being used by multiple video-output devices. Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Use cache-alignment in video_sync()Simon Glass2016-11-25-1/+2
| | | | | | | | | | | | | | | | Sometimes the frame buffer is not a multiple of the cache line size. Adjust the cache-flushing code to avoid cache warnings/errors in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
| * spi: Add a debug() on bind failureSimon Glass2016-11-25-1/+4
| | | | | | | | | | | | | | This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: spi: Honour the deactivation delaySimon Glass2016-11-25-0/+8
| | | | | | | | | | | | | | This is not currently implemented. Add support for this so that the Chrome OS EC can be used on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: spi: Add support for of-platdataSimon Glass2016-11-25-1/+35
| | | | | | | | | | | | Allow this driver to be used with of-platdata on rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
| * spi: Add of-platdata support to SPI and SPI flashSimon Glass2016-11-25-2/+13
| | | | | | | | | | | | | | Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Correct VOP clock selectionSimon Glass2016-11-25-6/+1
| | | | | | | | | | | | | | | | This code incorrectly uses the oscillator. It should use the clock selected in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 135aa95 (clk: convert API to match reset/mailbox style)
| * rockchip: video: Correct HDMI data source selectionSimon Glass2016-11-25-1/+2
| | | | | | | | | | | | | | | | | | | | This code currently always selects the second source. It only worked because both sources are set up. With the change to only init video devices that are present in the stdout environment variable, this fails. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * power: regulator: Add limits checking while setting currentKeerthy2016-11-25-0/+7
| | | | | | | | | | | | | | | | | | | | Currently the specific set ops functions are directly called without any check for min/max current limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixed checking of current limits: Signed-off-by: Simon Glass <sjg@chromium.org>
| * power: regulator: Add limits checking while setting voltageKeerthy2016-11-25-0/+7
| | | | | | | | | | | | | | | | | | | | | | Currently the specific set ops functions are directly called without any check for voltage limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed checking of voltate limits: Signed-off-by: Simon Glass <sjg@chromium.org>
| * power: regulator: Introduce regulator_set_value_force functionKeerthy2016-11-25-0/+14
| | | | | | | | | | | | | | | | | | In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-11-25-2/+8
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/Kconfig
| * | driver: net: ldpaa_eth: Fix missing bracket issuePriyanka Jain2016-11-21-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | lpuart: add a get_lpuart_clk functionShaohui Xie2016-11-21-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's not always true that LPUART clock is CONFIG_SYS_CLK_FREQ. This patch provides a weak function get_lpuart_clk(), so that the clock can be ovreridden on a specific board which uses different clock for LPUART. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Reformat commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* | | serial: pxa: integrate optional driver model handlingMarcel Ziswiler2016-11-23-70/+113
| | | | | | | | | | | | | | | | | | | | | Optional driver model handling integration. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | | serial: pxa: use kconfig for serial configurationMarcel Ziswiler2016-11-23-0/+6
| |/ |/| | | | | | | | | | | Migrate the PXA serial driver to be configured via Kconfig. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-11-22-453/+399
|\ \
| * | sf: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02GRadu Bacrau2016-11-22-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Macronix MX66U51235F, MX66L1G45G and Micron MT25QU02G, MT25QL02G flash parts. Signed-off-by: Radu Bacrau <dumitru.bacrau@intel.com> Cc: Chin Liang See <clsee@altera.com> Cc: Radu Bacrau <radu.bacrau@gmail.com> [Update proper commit header and 80-line cut on body] Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | drivers: SPI: sunxi SPL: fix warningAndre Przywara2016-11-21-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Somehow an int returning function without a return statement sneaked in, fix it. Also fix some whitespace damage on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: Fix s25fs512s id tableJagan Teki2016-11-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | s25fs512s and s25fl512s_256k have common id information till 5 bytes and 6th byte have different family id like FS and FL-S as 0x81 and 0x80. Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * | sf: dataflash: Minor cleanupsJagan Teki2016-11-19-23/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix single line comments - remove unneeded spaces - ascending order of include files - rename SPI DATAFLASH to dataflash - rename SPI DataFlash to dataflash - return NULL replaced with error code Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: dataflash: Fix add_dataflash return logicJagan Teki2016-11-19-66/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixed the add_dataflash return logic, so-that it can handle both jedec and older chips same as Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: dataflash: Move flash id detection into jedec_probeJagan Teki2016-11-19-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flash id detection should be the first step to enumerate the connected flash on the board, once ie done checking with respective id codes locally in the driver all this should be part of jedec_probe instead of id detection and validated through flash_info{} table separatly. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: dataflash: Remove unneeded spi dataJagan Teki2016-11-19-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dataflash doesn't require options, memory_map from spi. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | spi: Remove dual flash options/flagsJagan Teki2016-11-19-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dual flash code in spi are usually take the spi controller to work with dual connected flash devices. Usually these dual connection operation's are referred to flash controller protocol rather with spi controller protocol, these are still present in flash side for the usage of spi-nor controllers. So, this patch remove the dual_flash options or flags in sf which are triggered from spi controller side. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: Rename few local functionsJagan Teki2016-11-18-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_flash_write_bar-> write_bar spi_flash_write_bar -> read_bar spi_flash_cmd_wait_ready -> spi_flash_wait_till_ready Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: ids: Use small letter in ext_jedecJagan Teki2016-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use small 'd' in s25s512s ext_jedec Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: ids: Use small letter's with flash nameJagan Teki2016-11-18-110/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For readability use small letter's with flash name. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: Rename sf_params.c to spi_flash_ids.cJagan Teki2016-11-18-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the flash params table as renamed to spi_flash_ids structure, so rename the sf_params.c to spi_flash_ids.c and remove the legacy. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: Remove non-meaningful commentsJagan Teki2016-11-18-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded/non-meaningful commit message on params and flash. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: Remove spansion_s25fss_disable_4KB_eraseJagan Teki2016-11-18-86/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. For this: - Removed spansion_s25fss_disable_4KB_erase code - Add SECT_4K for S25FS512S chip Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | sf: params: Add S25FS256S_64K spi flash supportJagan Teki2016-11-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Spansion S25FS256S_64K spi flash to the list of spi_flash_ids. In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: Add INFO6 flash_info macroJagan Teki2016-11-18-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO6 is for tabulating 6 byte flash parts, Ex: S25FS256S_64K Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | sf: Increase max id length by 1 byteJagan Teki2016-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So, now SPI_FLASH_ID_MAX_LEN is 6 bytes useful for few spansion flash families S25FS-S Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: Add SPI_FLASH_MAX_ID_LENJagan Teki2016-11-18-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add id length of 5 bytes numerical value to macro. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | sf: nr_sectors -> n_sectorsJagan Teki2016-11-18-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename nr_sectors as n_sectors to sync with Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * | sf: Cleanup spi_flash_info{}Jagan Teki2016-11-18-24/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Proper tabs spaces - Removed unnecessary - Add comments in spi_flash_info members - Add comments for spi_flash_info.flags Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | sf: sandbox: Use JEDEC_MFR|ID in id exctractJagan Teki2016-11-18-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of extracting id's separately better to use JEDEC_MFR|ID for code simplicity. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | sf: Simplify lock ops detection codeJagan Teki2016-11-18-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the flash_lock ops detection code and added meaningful comment. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | sf: Adopt flash table INFO macro from LinuxJagan Teki2016-11-18-180/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO macro make flash table entries more adjustable like adding new flash_info attributes, update ID length bytes and so on and more over it will sync to Linux way of defining flash_info attributes. - Add JEDEC_ID - Add JEDEC_EXT macro - Add JEDEC_MFR - spi_flash_params => spi_flash_info - params => info Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * | spi: kirkwood_spi: implement mvebu_spi_set_mode()Chris Packham2016-11-18-0/+15
| |/ | | | | | | | | | | | | | | | | Set the appropriate bits in the interface config register based on the SPI_ mode flags. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Chris Packham <judge.packham@gmail.com>
generated by cgit v1.1 at 2024-09-17 22:23:06 +0000