summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* video: Track whether a display is in useSimon Glass2016-11-25-1/+17
| | | | | | | Mark a display as in use when display_enable() is called. This can avoid a display being used by multiple video-output devices. Signed-off-by: Simon Glass <sjg@chromium.org>
* video: Use cache-alignment in video_sync()Simon Glass2016-11-25-1/+2
| | | | | | | | Sometimes the frame buffer is not a multiple of the cache line size. Adjust the cache-flushing code to avoid cache warnings/errors in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
* spi: Add a debug() on bind failureSimon Glass2016-11-25-1/+4
| | | | | | | This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spi: Honour the deactivation delaySimon Glass2016-11-25-0/+8
| | | | | | | This is not currently implemented. Add support for this so that the Chrome OS EC can be used on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spi: Add support for of-platdataSimon Glass2016-11-25-1/+35
| | | | | | Allow this driver to be used with of-platdata on rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
* spi: Add of-platdata support to SPI and SPI flashSimon Glass2016-11-25-2/+13
| | | | | | | Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: video: Correct VOP clock selectionSimon Glass2016-11-25-6/+1
| | | | | | | | This code incorrectly uses the oscillator. It should use the clock selected in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 135aa95 (clk: convert API to match reset/mailbox style)
* rockchip: video: Correct HDMI data source selectionSimon Glass2016-11-25-1/+2
| | | | | | | | | | This code currently always selects the second source. It only worked because both sources are set up. With the change to only init video devices that are present in the stdout environment variable, this fails. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* power: regulator: Add limits checking while setting currentKeerthy2016-11-25-0/+7
| | | | | | | | | | Currently the specific set ops functions are directly called without any check for min/max current limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixed checking of current limits: Signed-off-by: Simon Glass <sjg@chromium.org>
* power: regulator: Add limits checking while setting voltageKeerthy2016-11-25-0/+7
| | | | | | | | | | | Currently the specific set ops functions are directly called without any check for voltage limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed checking of voltate limits: Signed-off-by: Simon Glass <sjg@chromium.org>
* power: regulator: Introduce regulator_set_value_force functionKeerthy2016-11-25-0/+14
| | | | | | | | | In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-11-22-453/+399
|\
| * sf: Add support for MX66U51235F, MX66L1G45G, MT25QU02G, MT25QL02GRadu Bacrau2016-11-22-0/+4
| | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Macronix MX66U51235F, MX66L1G45G and Micron MT25QU02G, MT25QL02G flash parts. Signed-off-by: Radu Bacrau <dumitru.bacrau@intel.com> Cc: Chin Liang See <clsee@altera.com> Cc: Radu Bacrau <radu.bacrau@gmail.com> [Update proper commit header and 80-line cut on body] Reviewed-by: Jagan Teki <jagan@openedev.com>
| * drivers: SPI: sunxi SPL: fix warningAndre Przywara2016-11-21-1/+2
| | | | | | | | | | | | | | | | | | Somehow an int returning function without a return statement sneaked in, fix it. Also fix some whitespace damage on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: Fix s25fs512s id tableJagan Teki2016-11-19-1/+1
| | | | | | | | | | | | | | | | | | s25fs512s and s25fl512s_256k have common id information till 5 bytes and 6th byte have different family id like FS and FL-S as 0x81 and 0x80. Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * sf: dataflash: Minor cleanupsJagan Teki2016-11-19-23/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fix single line comments - remove unneeded spaces - ascending order of include files - rename SPI DATAFLASH to dataflash - rename SPI DataFlash to dataflash - return NULL replaced with error code Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: dataflash: Fix add_dataflash return logicJagan Teki2016-11-19-66/+61
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixed the add_dataflash return logic, so-that it can handle both jedec and older chips same as Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: dataflash: Move flash id detection into jedec_probeJagan Teki2016-11-19-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Flash id detection should be the first step to enumerate the connected flash on the board, once ie done checking with respective id codes locally in the driver all this should be part of jedec_probe instead of id detection and validated through flash_info{} table separatly. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: dataflash: Remove unneeded spi dataJagan Teki2016-11-19-5/+1
| | | | | | | | | | | | | | | | | | | | | | dataflash doesn't require options, memory_map from spi. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * spi: Remove dual flash options/flagsJagan Teki2016-11-19-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dual flash code in spi are usually take the spi controller to work with dual connected flash devices. Usually these dual connection operation's are referred to flash controller protocol rather with spi controller protocol, these are still present in flash side for the usage of spi-nor controllers. So, this patch remove the dual_flash options or flags in sf which are triggered from spi controller side. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: Rename few local functionsJagan Teki2016-11-18-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_flash_write_bar-> write_bar spi_flash_write_bar -> read_bar spi_flash_cmd_wait_ready -> spi_flash_wait_till_ready Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: ids: Use small letter in ext_jedecJagan Teki2016-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use small 'd' in s25s512s ext_jedec Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: ids: Use small letter's with flash nameJagan Teki2016-11-18-110/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For readability use small letter's with flash name. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: Rename sf_params.c to spi_flash_ids.cJagan Teki2016-11-18-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the flash params table as renamed to spi_flash_ids structure, so rename the sf_params.c to spi_flash_ids.c and remove the legacy. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: Remove non-meaningful commentsJagan Teki2016-11-18-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded/non-meaningful commit message on params and flash. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: Remove spansion_s25fss_disable_4KB_eraseJagan Teki2016-11-18-86/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. For this: - Removed spansion_s25fss_disable_4KB_erase code - Add SECT_4K for S25FS512S chip Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * sf: params: Add S25FS256S_64K spi flash supportJagan Teki2016-11-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Spansion S25FS256S_64K spi flash to the list of spi_flash_ids. In spansion S25FS-S family the physical sectors are grouped as normal and parameter sectors. Parameter sectors are 4kB in size with 8 set located at the bottom or top address of a device. Normal sectors are similar to other flash family with sizes of 64kB or 32 kB. To erase whole flash using sector erase(D8h or DCh) won't effect the parameter sectors, so in order to erase these we must use 4K sector erase commands (20h or 21h) separately. So better to erase the whole flash using 4K sector erase instead of detecting these family parts again and do two different erase operations. Cc: Yunhui Cui <yunhui.cui@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: Add INFO6 flash_info macroJagan Teki2016-11-18-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO6 is for tabulating 6 byte flash parts, Ex: S25FS256S_64K Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * sf: Increase max id length by 1 byteJagan Teki2016-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So, now SPI_FLASH_ID_MAX_LEN is 6 bytes useful for few spansion flash families S25FS-S Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: Add SPI_FLASH_MAX_ID_LENJagan Teki2016-11-18-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add id length of 5 bytes numerical value to macro. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * sf: nr_sectors -> n_sectorsJagan Teki2016-11-18-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename nr_sectors as n_sectors to sync with Linux. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
| * sf: Cleanup spi_flash_info{}Jagan Teki2016-11-18-24/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Proper tabs spaces - Removed unnecessary - Add comments in spi_flash_info members - Add comments for spi_flash_info.flags Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sf: sandbox: Use JEDEC_MFR|ID in id exctractJagan Teki2016-11-18-3/+2
| | | | | | | | | | | | | | | | | | | | | | Instead of extracting id's separately better to use JEDEC_MFR|ID for code simplicity. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * sf: Simplify lock ops detection codeJagan Teki2016-11-18-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the flash_lock ops detection code and added meaningful comment. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * sf: Adopt flash table INFO macro from LinuxJagan Teki2016-11-18-180/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO macro make flash table entries more adjustable like adding new flash_info attributes, update ID length bytes and so on and more over it will sync to Linux way of defining flash_info attributes. - Add JEDEC_ID - Add JEDEC_EXT macro - Add JEDEC_MFR - spi_flash_params => spi_flash_info - params => info Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * spi: kirkwood_spi: implement mvebu_spi_set_mode()Chris Packham2016-11-18-0/+15
| | | | | | | | | | | | | | | | | | Set the appropriate bits in the interface config register based on the SPI_ mode flags. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Chris Packham <judge.packham@gmail.com>
* | gpio: dwapb: Add support for port BPhil Edworthy2016-11-21-10/+10
|/ | | | | | | | | | The IP supports two ports, A and B, each providing up to 32 gpios. The driver already creates a 2nd gpio bank by reading the 2nd node from DT, so this is quite a simple change to support the 2nd bank. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of http://git.denx.de/u-boot-mmcTom Rini2016-11-17-5/+12
|\
| * mmc: sunxi: Enable 8bits bus width for sun8iMaxime Ripard2016-11-16-1/+1
| | | | | | | | | | | | | | | | | | The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the support for those too. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
| * mmc: Retry the switch commandMaxime Ripard2016-11-16-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | Some eMMC will fail at the first switch, but would succeed in a subsequent one. Make sure we try several times to cover those cases. The number of retries (and the behaviour) is currently what is being used in Linux. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini2016-11-17-2/+22
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080
| * | ls2080: Exit dpaa only right before exiting U-BootAlexander Graf2016-11-17-2/+22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
* | net: zynq_gem: Correct SGMII enable bit settingSiva Durga Prasad Paladugu2016-11-15-1/+1
| | | | | | | | | | | | | | | | | | Correct the SGMII enable bit position to 27 instead of 31. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | net: zynq_gem: Modify the nwcfg bit definitionsSiva Durga Prasad Paladugu2016-11-15-8/+8
| | | | | | | | | | | | | | | | | | Modify the nwcfg bit definitions to have 32-bit by removing the extra nibble. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | nand: arasan_nfc: Clear ecc on bit while sending read commandSiva Durga Prasad Paladugu2016-11-15-0/+2
| | | | | | | | | | | | | | | | | | | | Clear ecc ON bit while sending read command as all types of read command(like reading spare) doesnt need ECC to be enabled. It has been anyway taken care in other places whereever required using arasan_nand_enable_ecc(). Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | mtd: nand: zynq_nand: Add nand driver support for zynqSiva Durga Prasad Paladugu2016-11-15-0/+1194
|/ | | | | | | Add nand flash controller driver support for zynq SoC. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabledStefan Roese2016-11-13-3/+3
| | | | | | | | | | | | | | | | | | | | | Compiling the 'bmp' command with DM and having one of the following macros enabled: CONFIG_BMP_16BPP, CONFIG_BMP_24BPP ONFIG_BMP_32BPP generates this error: drivers/video/video_bmp.c: In function ‘video_bmp_display’: drivers/video/video_bmp.c:315:22: error: ‘lcd_line_length’ undeclared (first use in this function) fb -= width * 2 + lcd_line_length; ^ This patch moves to using the correct variable instead and enables the 'bmp' command for DM again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* spi: ti_qspi: Fix baudrate divider calculationVignesh R2016-11-13-9/+7
| | | | | | | | | Fix the divider calculation logic to choose a value so that the resulting baudrate is either equal to or closest possible baudrate less than the requested value. While at that, cleanup ti_spi_set_speed(). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* net: mvgbe: Fix build error with CONFIG_PHYLIBChris Packham2016-11-07-22/+3
| | | | | | | | | | | | | | Commit 5a49f17481bb ("net: mii: Use spatch to update miiphy_register") updated the mvgbe implementation of smi_reg_read/smi_reg_write. Prior to that change mvgbe_phy_read and mvgbe_phy_write where used as wrappers to satisfy the phylib APIs. Because these functions weren't updated in that commit build errors where triggered when CONFIG_PHYLIB was enabled. Fix these build errors by removing mvgbe_phy_read and mvgbe_phy_write and using smi_reg_read/smi_reg_write directly. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: micrel: center FLP burst timing at 16msAsh Charles2016-11-07-0/+23
| | | | | | | | | | | | | Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms specified by the IEEE802.3 standard from the chip's default of 8ms. For more details, see the "Auto-Negotiation Timing" section of the KSZ9031RNX datasheet. [1] https://patchwork.kernel.org/patch/6558371/ Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-11-06 14:24:41 +0000