summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* usb: ehci: do not set the LSB of Current qTD pointerMasahiro Yamada2014-11-19-1/+0
| | | | | | | According to EHCI specification, the LSB of DWORD 3 of Queue Head (Current qTD Pointer) is not T-bit, but always zero. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dfu: thor: fix: Modify dfu_get_alt() function to support absolute pathsLukasz Majewski2014-11-14-2/+27
| | | | | | | | | | | | | | | | Recently the ext4 file system imposed passing absolute path with its file name parameter. As a result dfu_alt_info env variable has been modified to provide absolute path when ext4 file system is accessed (e.g. /uImage ext4 0 2;). Unfortunately, lthor flashing program provides plain file name (like uImage) and hence those two file names do not match anymore. Presented commit also allows lthor to write files to sub directories (like /boot/bin/uImage). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
* usb:ehci-mx6 add phy mode query functionPeng Fan2014-11-14-2/+25
| | | | | | | | | | | | | | | | usb_phy_enable should return status bit, but not phy mode bit, thus add a new function usb_phy_mode to query the PHY for it's mode and make usb_phy_enable just return 0 but not 'phy_ctrl & USBPHY_CTRL_OTG_ID'. Include a new board weak function board_usb_phy_mode. If board code does not reimplement this function, it just call usb_phy_mode and return usb_phy_mode's return value. The reason to include such a weak function is: " SOC OTG core <--connect--> board HOST port, but no pin id for the board host port, so board can not use usb_phy_mode to return the phy mode, but define it's own rule." Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <B37916@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2014-11-13-26/+288
|\
| * sun6i: ehci: Add sun6i ehci supportHans de Goede2014-11-13-16/+29
| | | | | | | | | | | | | | | | Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Marek Vasut <marex@denx.de>
| * sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-sHans de Goede2014-11-13-10/+25
| | | | | | | | | | | | | | | | | | Add proper Kconfig options to select the usb Vbus gpio-s, besides moving to Kconfig being the right thing to do, an added advantage of this is that it allows for boards without Vbus gpio-s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sun6i: Add basic axp221 driverOliver Schinagl2014-11-13-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A31 uses the AXP221 pmic for various voltages. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> -- Changes in v2: -Rebase Changes in v3: -Add support for all dldo and aldo-s -Add Kconfig option to select building AXP221 and to select voltage of dldo and aldo-s Changes in v4: -Add axp221_setbits helper function -Use symbolic names for enabled bits in CTRL1 - CTRL3 registers
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-11-11-75/+124
|\ \ | |/ |/|
| * usb: eth: fix MakefileRene Griessl2014-11-07-3/+1
| | | | | | | | | | | | fix obj-y term Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
| * usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of ↵Nobuhiro Iwamatsu2014-11-07-4/+4
| | | | | | | | | | | | | | CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Marek Vasut <marex@denx.de>
| * usb: ehci: fix Interrupt on Doorbell flag of USBCMDMasahiro Yamada2014-11-07-2/+2
| | | | | | | | | | | | | | CMD_IAAD (Interrupt on Async Advance Doorbell) is bit 6, not bit 5. While we are here, sort the flags. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * usb: s3c-otg: Allow custom gusbcfgMarek Vasut2014-11-07-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow passing in a custom configuration of the gusbcfg register via platform data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: s3c-otg: Split out PHY controlMarek Vasut2014-11-07-62/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split the Samsung specific PHY control into a separate file and compile this into the S3C OTG driver only if used on a Samsung system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: s3c-otg: Encapsulate PHY controlMarek Vasut2014-11-06-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Encapsulate the Samsung PHY control and its register accesses into the otg_phy_init() and otg_phy_off() functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
| * usb: s3c-otg: Remove useless includeMarek Vasut2014-11-06-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove the useless inclusion of arch/arm/gpio.h , which is completely bogus in this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Stefan Roese <sr@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* | usb: UniPhier: add UniPhier on-chip EHCI host driver supportMasahiro Yamada2014-11-12-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | Support EHCI host driver used on Panasonic UniPhier platform. Since Device Tree is not supported on UniPhier yet, the base address of USB cores are passed from board files (platdevice.c). TODO for me: Move the base address to device trees. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* | usb: add basic USB configs in KconfigMasahiro Yamada2014-11-12-0/+94
| | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* | serial: UniPhier: borrow macros from linux/serial_reg.hMasahiro Yamada2014-11-12-13/+2
| | | | | | | | | | | | | | | | | | The same bit-field macros are defined in include/linux/serial_reg.h so let's include it and delete duplicated defines. Also, remove unnecessary inclusion of <common.h>. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2014-11-10-7/+29
|\ \
| * | i2c: rcar_i2c: Fix order of restart and clear statusNobuhiro Iwamatsu2014-11-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of repeated START condition, the restart has to be kicked before clear status (MSR register). If it is kicked after clear status, R-Car I2C may transfer data (TXD register) or receive data (RXD register) instead of transferring slave address (MAR register). Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | drivers/i2c/fsl_i2c: Change CONFIG_I2C_TIMEOUT to 100msShaveta Leekha2014-11-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some slow I2C devices like Power Monitor(ZM7304) at times do not work well with low timeout value, so I2C bus get stuck during read cycle with this device, changing it to 100ms from 10ms works fine A lot of other i2c drivers like mxc and i2c drivers of BOOTROM also use relax timeouts to give sufficient ticks to work well with slower devices Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
| * | ppc4xx: Handle i2c stuck on combined xferDirk Eibach2014-11-10-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ppc4xx i2c master gets stuck on errors while repeated start is active. Can be easily reproduced by "i2c md" on an unpopulated i2c address. There is not stop condition given, scl remains pulled low. The only way out seems to be doing a stop manually and then a soft reset. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Fix i2c repeated startDirk Eibach2014-11-10-4/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Debugging some i2c trouble I saw on my scope that repeated start is not working properply. The 4xx even held clock pulled down after transfers. Having a look in the driver I realized that IIC_CNTL_RPST is set on that part of the transfer that should begin with a repeated start. But repeated start is about not sending a stop condition, so IIC_CNTL_RPST has to be set on the last transfer before the repeated start happens. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
* | drivers/net/uli526x.c: fix syntax errorWolfgang Denk2014-11-07-1/+1
| | | | | | | | | | | | | | | | | | | | Fix error detected by cppcheck: [drivers/net/uli526x.c:551]: (error) printf format string requires 3 parameters but only 2 are given. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | power_spi.c: Rewrite pmic_reg functionTom Rini2014-11-07-23/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The pmic_spi_free function isn't ever used, and as the frameworks stand today, cannot be, so remove it. Integrate the probe function into pmic_reg as it's not really a "probe" today. Finally, add an err label for the common failure cases. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | net: smc911x: Keep MAC programmedMarek Vasut2014-11-07-0/+1
| | | | | | | | | | | | | | | | | | | | Make sure to keep the MAC address programmed in the SMC911x ADDRH and ADDRL registers. Linux can read those registers to determine the MAC address on EEPROM-less configurations. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Tom Rini <trini@ti.com>
* | sort drivers/mmc/MakefilePavel Machek2014-11-07-10/+12
| | | | | | | | | | | | | | Sort drivers/mmc makefile, as requested by wd. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
* | Merge git://git.denx.de/u-boot-tiTom Rini2014-11-07-16/+60
|\ \ | |/ |/|
| * omap: hsmmc: assume cd gpio is active lowIgor Grinberg2014-11-06-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch the default CD GPIO polarity to active low. The current hsmmc driver assumption that the CD GPIO is active high, but in the real hardware, usually the opposite holds. The usual SD card socket has a mechanical switch which is grounded as soon as a card is inserted. Of course there might be some board logic which inverts the signal, but as far as current users are concerned, there is no such logic. Current U-Boot users either not using the CD functionality, or have a different way (e.g. external to SoC GPIO controller) for checking the card presence. This patch also brings the polarity assumption in line with the Linux kernel and adds appropriate comments. This patch also might spare issues once the TWL GPIO driver will be converted to the DM. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * dma: keystone_nav: remove spurious qm_cfg verificationKhoronzhuk, Ivan2014-11-06-12/+0
| | | | | | | | | | | | | | | | The verification qm_cfg existence is done at ksnav_init(). So, there is no need to verify it after initialization. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * net: phy: marvell: add errata w/a for 88E151* chipsHao Zhang2014-11-06-1/+52
| | | | | | | | | | | | | | | | | | | | | | As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514 Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires that certain registers get written in order to restart autonegotiation. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * net: keystone_net: add Keystone2 K2L SoC supportKhoronzhuk, Ivan2014-11-05-1/+4
| | | | | | | | | | | | | | | | The Keystone2 Lamar SoC uses the same keystone net driver. This patch adds opportunity to use it by K2L SoCs. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * net: keystone_serdes: add keystone K2L SoC supportKhoronzhuk, Ivan2014-11-05-1/+1
| | | | | | | | | | | | | | | | | | Keystone2 Lamar SoC uses the same keystone SerDes driver. All Keystone2 EVM boards currently use SerDes driver, so move CONFIG_TI_KEYSTONE_SERDES to common configuration file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-2/+7
|\ \ | |/ |/|
| * mtd: nand: mxs: Add ECC geometry for 2048b/112b NANDMarek Vasut2014-10-30-2/+7
| | | | | | | | | | | | | | Add ECC geometry for NAND which has 2048b pagesize and 112b OOB size. This is for example Macronix MX30LF2G28AB chip. Signed-off-by: Marek Vasut <marex@denx.de>
* | Merge git://www.denx.de/git/u-boot-sunxiTom Rini2014-11-05-13/+245
|\ \
| * | dm: sunxi: Request USB vbus gpioHans de Goede2014-11-05-0/+10
| | | | | | | | | | | | | | | | | | | | | This is necessary for the device-model enabled builds to work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dm: sunxi: Request card detect gpioHans de Goede2014-11-05-10/+22
| | | | | | | | | | | | | | | | | | | | | This is necessary for the device-model enabled builds to work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dm: sunxi: Add support for serial using driver modelSimon Glass2014-11-05-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the designware serial UART used on sunxi. This just redirects to the normal ns16550 driver. Add a stdout-path to the device tree so that the correct UART is chosen. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | dm: sunxi: Modify the GPIO driver to support driver modelSimon Glass2014-11-05-0/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds driver model support to the sunxi GPIO driver, using the device tree to trigger binding of the driver. The driver will still operate without driver model too. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?IIan Campbell2014-11-05-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly automatic with: sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I) followed by removing the relevant #defines from include/configs/sun?i.h by hand. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | Merge git://git.denx.de/u-boot-shTom Rini2014-11-04-62/+64
|\ \ \ | |/ / |/| |
| * | net: sh-eth: Add cache writeback control after setting bit of DMA descriptorNobuhiro Iwamatsu2014-11-04-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | A bit field of DMA descriptor is on memory area of DMA. If we set data to bit of DMA descriptor, we must be writeback data of DMA descriptor. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | net: sh-eth: Use memalign instead of orignal memroy alignment functionNobuhiro Iwamatsu2014-11-04-48/+41
| | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | net: sh-eth: Remove definition of RX_DESC_SIZE and TX_DESC_SIZENobuhiro Iwamatsu2014-11-04-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | RX_DESC_SIZE and TX_DESC_SIZE mean the size of the data descriptor for sh-eth. We can acquire this in sizeof. It is not necessary to define these in define. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | serial: sh: r8a7794: Add support external clockNobuhiro Iwamatsu2014-11-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The baud rate setting of external clock is enabled. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | net: sh-eth: Add support R8A7793Nobuhiro Iwamatsu2014-11-04-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | R8A7793 has the same sh-ether IP core as other SH/rmobile. This patch adds support of R8A7793. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | serial: sh: Add support R8A7793Nobuhiro Iwamatsu2014-11-04-4/+6
| | | | | | | | | | | | | | | | | | | | | This adds the preset value to register for R8A7793. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | serial: add prototypes for init functionsJeroen Hofstee2014-11-04-70/+70
| | | | | | | | | | | | | | | | | | | | | | | | While at it, sort them. Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* | | i2c: use __weakJeroen Hofstee2014-11-04-6/+2
| | | | | | | | | | | | | | | Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>