summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOULHeiko Schocher2009-12-08-4/+0
| | | | | | | | | There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' into nextWolfgang Denk2009-12-07-3/+3
|\ | | | | | | | | | | | | Conflicts: lib_generic/zlib.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Fix computation in nand_util.c:get_len_incl_badDaniel Hobi2009-12-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on offset, flash size and the number of bad blocks, get_len_incl_bad may return a too small value which may lead to: 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the bad block aware read/write code. This may hurt performance, but does not have any adverse effects. 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose the bad block unaware read/write code (if len_incl_bad == *length) which leads to corrupted data. Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
| * smc911x: fix typo in smc911x_handle_mac_address nameMike Rapoport2009-12-07-2/+2
| | | | | | | | Signed-off-by: Mike Rapoport <mike@compulab.co.il>
* | Merge branch 'master' into nextWolfgang Denk2009-12-05-18/+358
|\ \ | |/ | | | | | | | | | | | | Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * RTC: Fix return code in MC13783 RTC driver.Magnus Lilja2009-12-02-1/+1
| | | | | | | | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * m41t11: Remove unused functionsPeter Tyser2009-12-02-14/+0
| | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
| * Add support for CS2 dataflash for Atmel-SPI.Remy Bohmer2009-11-23-2/+16
| | | | | | | | | | | | | | The only missing chipselect line support is CS2, and I need it on CS2... Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * sf: fix stmicro offset setup while erasingMike Frysinger2009-11-22-1/+2
| | | | | | | | | | Reported-by: Peter Gombos <gombos@protecta.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: new driver for Winbond W25X16/32/64 devicesJason McMullan2009-11-22-0/+339
| | | | | | | | | | Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Add driver for FTRTC010 real time clockPo-Yu Chuang2009-11-22-0/+125
| | | | | | | | | | | | | | Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | omap3_mmc: Encapsulate twl4030 under option CONFIG_TWL4030_POWERVaibhav Hiremath2009-11-27-0/+2
| | | | | | | | | | | | | | Fixes the build/compilation error if we try to re-use the omap3_mmc code without TWL4030_POWER. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
* | arm: A320: driver for FTRTC010 real time clockPo-Yu Chuang2009-11-27-0/+125
| | | | | | | | | | | | This patch adds an FTRTC010 driver for Faraday A320 evaluation board. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
* | Add a unified s3c24x0 header filekevin.morfitt@fearnside-systems.co.uk2009-11-27-18/+5
| | | | | | | | | | | | | | | | | | | | This patch adds a unified s3c24x0 cpu header file that selects the header file for the specific s3c24x0 cpu from the SOC and CPU configs defined in board config file. This removes the current chain of s3c24-type #ifdef's from the s3c24x0 code. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | s5pc1xx: serial: fix the error check logicMinkyu Kang2009-11-27-7/+17
| | | | | | | | | | | | | | Because of Frame error, Parity error and Overrun error are occured only receive operation, need to masking when error checking. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xxMinkyu Kang2009-11-27-3/+3
| | | | | | | | | | | | | | This patch moves the s3c64xx header files from include/ to include/asm-arm/arch-s3c64xx Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Move s3c24x0 header files to asm-arm/arch-s3c24x0/kevin.morfitt@fearnside-systems.co.uk2009-11-27-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the s3c24x0 header files from include/ to include/asm-arm/arch-s3c24x0/. checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due to a non-UTF8 character in David M?ller's name: ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8 #489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3: + * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch As David's name correctly contains a non-UTF8 character I haven't fixed these errors. The 3 warnings were all because of the use of 'volatile' in s3c24x0.h: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt #673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35: +typedef volatile u8 S3C24X0_REG8; +typedef volatile u16 S3C24X0_REG16; +typedef volatile u32 S3C24X0_REG32; I'll fix these errors in another patch. Tested by running MAKEALL for ARM8 targets and ensuring there were no new errors or warnings. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Fix for Void function returning value in sbc35-a9g20Sandeep Paulraj2009-11-27-1/+0
| | | | | | | | | | | | | | Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | at91: Extended soft_i2c driver for AT91SAM9263 SoCDaniel Gorsulowski2009-11-23-0/+5
| | | | | | | | | | | | | | | | While hard_i2c support is not available (see http://lists.denx.de/pipermail/u-boot/2009-March/049751.html), this patch enables soft_i2c on AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
* | Merge branch 'next' of git://git.denx.de/u-boot-nand-flash into nextWolfgang Denk2009-11-21-12/+44
|\ \
| * | NAND: Add Support for 4K page size in DaVinci NAND driverSandeep Paulraj2009-11-20-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for NAND devices with a page size of 4K in the DaVinci NAND driver. The layout matches the layout that TI uses for 4K page size NAND devices in the kernel NAND driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | S3C2410 NAND Flash Add Missing FunctionHui.Tang2009-11-18-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | This patch add nand_read_buf() for S3C2410 NAND SPL. In nand_spl/nand_boot.c, nand_boot() will check nand->select_chip, so nand->select_chip should also be initialized. Signed-off-by: Hui.Tang <zetalabs@gmail.com>
| * | NAND: Update read_read_subpage API checkSandeep Paulraj2009-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | This patch updates a check condition in the NAND driver. The check condition is similat to what is in linux/next. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | | OMAP2/3: I2C: Add support for second and third busDirk Behme2009-11-16-67/+99
|/ / | | | | | | | | | | | | | | | | | | Add support to use second and third I2C bus, too. Bus 0 is still the default, but by calling i2c_set_bus_num(1/2) before doing I2C accesses, code can switch to bus 1 and 2, too. Don't forget to switch back afterwards, then. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | Merge branch 'master' into nextWolfgang Denk2009-11-15-45/+54
|\ \ | |/
| * smc911x: make smc911x_initialize return correct valueMike Rapoport2009-11-12-2/+2
| | | | | | | | | | | | | | | | | | Make smc911x_initialize return -1 on error and number of interfaces detected otherwise. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-11-11-28/+35
| |\
| | * mxc_fec: avoid free() calls to already freed pointers.javier Martin2009-11-11-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes, inside NetLoop, eth_halt() is called before eth_init() has been called. This is harmless except for free() calls to pointers which have not been allocated yet. This patch initializes those pointers to NULL and allocates them only the first time. This way we can get rid of free calls in halt callback. This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * mxc_fec: fix some erroneous PHY accesses.javier Martin2009-11-11-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes erroneous access to the ethernet PHY which broke the driver. 1. Selector field in the auto-negotiation register must be 0x00001 for using 802.3, not 0x00000 which is reseved. 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not 0x0 fixed address. This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains. Now using proper defines for auto-negotiation register. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * SMC91111: Clean up SMC_inx macros on xsengine and xaeniaxBen Warren2009-11-09-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following warnings: Configuring for xaeniax board... smc91111_eeprom.c: In function 'print_macaddr': smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of & smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of & ... Configuring for xsengine board... smc91111_eeprom.c: In function 'print_macaddr': smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * Fix CS8900 regression on impa7 boardBen Warren2009-11-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following error was seen on impa7 board, due to its use of a 32-bit bus on CS8900. cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1 This patch gives the macro the correct number of arguments Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * Fix cs8900 dev->priv not init issueHui.Tang2009-11-09-3/+4
| | | | | | | | | | | | | | | | | | | | | Ensure all CS8900 data structures are assigned before accessing device Signed-off-by: Hui.Tang <zetalabs@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * Fix DM9000 MAC address handlingBen Warren2009-10-29-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | Proper behavior is to pull MAC address from NVRAM in the initialization() an stuff it in dev->address, then program the device from dev->address in the init() function. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | fsl_pci_init_port end-point initialization is brokenEd Swarthout2009-11-04-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 70ed869e broke fsl pcie end-point initialization. Returning 0 is not correct. The function must return the first free bus number for the next controller. fsl_pci_init() must still be called and a bus allocated even if the controller is an end-point. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"Kumar Gala2009-11-04-16/+2
| |/ | | | | | | | | | | | | | | | | | | | | This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc. There isn't any need to modify the API for fsl_pci_init_port to pass the status of host/agent(end-point) status. We can determine that internally to fsl_pci_init_port. Revert the patch that makes the API change. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Flex-OneNAND driver supportAmul Kumar Saha2009-11-13-98/+662
| | | | | | | | | | | | | | This patch adds support for Flex-OneNAND devices. Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com> Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>
* | fsl_elbc_nand: remove the bbt descriptors relocation fixupMingkai Hu2009-11-13-4/+0
| | | | | | | | | | | | | | The commit 66372fe2 manually relocated the bbt pattern pointer, which can be removed by using full relocation. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
* | NAND: fix "raw" reads with ECC syndrome layoutsDavid Brownell2009-11-13-4/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The syndrome based page read/write routines store ECC, and possibly other "OOB" data, right after each chunk of ECC'd data. With ECC chunk size of 512 bytes and a large page (2KiB) NAND, the layout is: data-0 OOB-0 data-1 OOB-1 data-2 OOB-2 data-3 OOB-3 OOB-leftover Where OOBx is (prepad, ECC, postpad). However, the current "raw" routines use a traditional layout -- data OOB, disregarding the prepad and postpad values -- so when they're used with that type of ECC hardware, those calls mix up the data and OOB. Which means, in particular, that bad block tables won't be found on startup, with data corruption and related chaos ensuing. The current syndrome-based drivers in mainline all seem to use one chunk per page; presumably they haven't noticed such bugs. Fix this, by adding read/write page_raw_syndrome() routines as siblings of the existing non-raw routines; "raw" just means to bypass the ECC computations, not change data and OOB layout. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | NAND: Don't walk past end of oobfree[]Sandeep Paulraj2009-11-13-1/+2
| | | | | | | | | | | | | | | | When computing oobavail from the list of free areas in the OOB, don't assume there will always be an unused slot at the end. This syncs up with the kernel NAND driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Update check condition for nand_read_page_hwecc APISandeep Paulraj2009-11-13-1/+1
| | | | | | | | | | | | | | | | The patch updates the check condition for determining whether the ECC corrections has failed. This makes it similar to what is in the kernel NAND driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Updating comments/explanations in the NAND driverSandeep Paulraj2009-11-13-4/+8
| | | | | | | | | | | | | | Patch updates the comments and explanations for the arguments to various functions. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Subpage shift for ecc_steps equal to 16Sandeep Paulraj2009-11-13-0/+1
| | | | | | | | | | | | | | | | | | This was originally part of Thomas Gleixner's patch for adding support for 4KiB pages. This is not part of the U-Boot NAND driver so updating the driver with this to sync up with the kernel NAND driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Remove commented out codeSandeep Paulraj2009-11-13-1/+0
| | | | | | | | | | | | Patch removes already commented out dead code Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Correct the "chip_shift" calculationSandeep Paulraj2009-11-13-1/+1
| | | | | | | | | | | | | | | | This patch updates the "chip_shift" calculation in the NAND driver. This is being done to sync up the NAND driver with the kernel NAND driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | NAND: Update to support 64 bit device sizeSandeep Paulraj2009-11-13-28/+39
| | | | | | | | | | | | | | | | This patch adds support for NANDs greater than 2 GB. Patch is based on the MTD NAND driver in the kernel. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'next' of git://git.denx.de/u-boot-video into nextWolfgang Denk2009-10-31-3/+51
|\ \
| * | video: mb862xx: add option VIDEO_FB_16BPP_WORD_SWAP for IPEK01Wolfgang Grandegger2009-10-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 16 bpp mode, the new IPEK01 board only requires swapping of D16 words for D32 accesses due to the diffferent connecting to the GDC bus. This patch introduces the configuration option VIDEO_FB_16BPP_WORD_SWAP, which should be set for all board using the mb862xx in 16 bpp mode. For the IPEK01, VIDEO_FB_16BPP_PIXEL_SWAP should not be set. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
| * | video: mb862xx: add option CONFIG_VIDEO_MB862xx_ACCEL for 32bpp modeAnatolij Gustschin2009-10-31-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new IPEK01 board can use the 32 bpp mode for the Lime graphics controller. For this mode, video accelaration does not work. This patch makes the accelaration configurable via CONFIG_VIDEO_MB862xx_ACCEL, which is enabled for the lwmon5 and the socrates board for backward compatibility. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Wolfgang Grandegger <wg@denx.de>
| * | video: mb862xx: improve board-specific Lime configurationWolfgang Grandegger2009-10-31-1/+33
| |/ | | | | | | | | | | | | | | | | | | | | To avoid board-specific code accessing the mb862xx registers directly, the public function mb862xx_probe() has been introduced. Furthermore, the "Change of Clock Frequency" and "Set Memory I/F Mode" registers are now defined by CONFIG_SYS_MB862xx_CCF and CONFIG_SYS_MB862xx__MMR, respectively. The BSPs for the socrates and lwmon5 boards have been adapted accordingly. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
* | new PCA9564 i2c bridge driverValentin Yakovenkov2009-10-30-0/+190
| | | | | | | | | | Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-30 00:35:49 +0000