summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write ↵Grant Likely2007-02-20-4/+3
| | | | | | | | | buffer pointers Block device read/write is anonymous data; there is no need to use a typed pointer. void * is fine. Also add a hook for block_read functions Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* [PATCH 7_9] Replace ace_readw_ace_writeb functions with macrosGrant Likely2007-02-20-26/+10
| | | | | | | Register read/write does not need to be wrapped in a full function. The patch replaces them with macros. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.cGrant Likely2007-02-20-1/+265
| | | | | | | | The code in this file is not a command; it is a device driver. Put it in the correct place. There are zero functional changes in this patch, it only moves the file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driverHeiko Schocher2007-01-19-16/+10
| | | | | | | if you must swap the bytes between reading/writing. (Needed for the SC3 board) Signed-off-by: Heiko Schocher <hs@denx.de>
* [PATCH] Fix: Compilerwarnings for SC3 board.Heiko Schocher2007-01-18-3/+3
| | | | | | | The EBC Configuration Register is now by CFG_EBC_CFG definable Added JFFS2 support for the SC3 board. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge with /home/hs/SC3/u-bootWolfgang Denk2007-01-15-2/+10
|\ | | | | | | Some code cleanup.
| * Added support for the SOLIDCARD III board from EurodesignHeiko Schocher2007-01-11-2/+10
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | [PATCH] nand: Fix problem with oobsize calculationStefan Roese2007-01-05-1/+1
|/ | | | | | | | | | | | | | | | | | Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part returns a 0x15. In the code fragment below bits [1:0] determine the page size, it is ANDed via "(extid & 0x3)" then shifted out. The next field is also ANDed with 0x3. However this is a one bit field as defined in the Hynix and Samsung parts in the 4th ID byte that determins the oobsize, not a two bit field. It works on Samsung as bits[3:2] are 01. However for the Hynix there is a 11 in these two bits, so the oob size gets messed up. I checked the correct linux code and the suggested fix from Brian is also available in the linux nand mtd driver. Signed-off-by: Stefan Roese <sr@denx.de>
* Fix bug in adaption of Stefano Babic's CFI driver patch.Wolfgang Denk2006-12-27-15/+21
|
* Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-12-24-1/+2
|\
| * Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different ↵Stefano Babic2006-12-24-1/+2
| | | | | | | | offset to go into CFI mode)
* | Merge with /home/hs/TQ/u-boot-devWolfgang Denk2006-12-24-7/+10
|\ \ | |/ |/|
| * Added support for the TQM8272 board from TQHeiko Schocher2006-12-21-7/+12
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | Code cleanup.Wolfgang Denk2006-11-30-574/+580
| |
* | Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.gitWolfgang Denk2006-11-30-47/+4008
|\ \
| * | Make fsl-i2c not conflict with SOFT I2CJoakim Tjernlund2006-11-29-7/+10
| | | | | | | | | | | | Signed-off-by: Timur Tabi <timur@freescale.com>
| * | Fix I2C master address initialization.Joakim Tjernlund2006-11-29-1/+1
| | | | | | | | | | | | Signed-off-by: Timur Tabi <timur@freescale.com>
| * | Merge http://www.denx.de/git/u-bootKim Phillips2006-11-28-61/+163
| |\ \
| * | | Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.cKim Phillips2006-11-28-3/+3
| | | | | | | | | | | | | | | | | | | | give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src since they are passed by reference to ucc_get_cmxucr_reg and assigned.
| * | | mpc83xx: Update 83xx to use fsl_i2c.cTimur Tabi2006-11-03-32/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. Added multiple I2C bus support to fsl_i2c.c. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: Replace CFG_IMMRBAR with CFG_IMMRTimur Tabi2006-11-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx tree matches the other 8xxx trees. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | mpc83xx: add QE ethernet supportDave Liu2006-11-03-0/+3910
| | | | | | | | | | | | | | | | this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
| * | | mpc83xx: Add support for the MPC8349E-mITXTimur Tabi2006-11-03-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | NAND Flash verify across block boundariesNick Spence2006-11-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is defined and the write crosses a block boundary. The pointer to the verification buffer (bufstart) is not being updated to reflect the starting of the new block so the verification of the second block fails. CHANGELOG: * Fix NAND FLASH page verification across block boundaries
| * | | Added RGMII support to the TSECs and Marvell 881111 PhyNick Spence2006-11-03-4/+4
| | |/ | |/| | | | | | | | | | | | | | | | Added a phy initialization to adjust the RGMII RX and TX timing Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode Signed-off-by: Nick Spence <nick.spence@freescale.com>
* | | [PATCH] nand: Fix patch merge problemStefan Roese2006-11-28-2/+2
| |/ |/| | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with /home/sr/git/u-boot/denx-alpr-merge-testWolfgang Denk2006-11-27-0/+2
|\ \
| * \ Merge with /home/stefan/git/u-boot/denxStefan Roese2006-11-27-57/+157
| |\ \
| * \ \ Merge with /home/stefan/git/u-boot/denxStefan Roese2006-11-10-397/+2766
| |\ \ \ | | | |/ | | |/|
| * | | CFG_NAND_QUIET_TEST added to not warn upon missing NAND deviceStefan Roese2006-10-07-0/+2
| | | | | | | | | | | | | | | | Patch by Stefan Roese, 07 Oct 2006
* | | | [PATCH] nand_wait() timeout fixesStefan Roese2006-11-27-4/+4
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two fixes for the nand_wait() function in drivers/nand/nand_base.c: 1. Use correct timeouts. The original timeouts in Linux source are 400ms and 20ms not 40s and 20s 2. Return correct error value in case of timeout. 0 is interpreted as OK. Signed-off-by: Rui Sousa <rui.sousa@laposte.net> Signed-off-by: Stefan Roese <sr@denx.de>
* | | [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]Stefan Roese2006-11-13-57/+157
| |/ |/| | | | | | | | | | | | | | | | | | | | | * Adds support for AMD command set Top Boot flash geometry reversal * Adds support for reading JEDEC Manufacturer ID and Device ID * Adds support for displaying command set, manufacturer id and device ids (flinfo) * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined * Removes outdated change history (refer to git log instead) Signed-off-by: Tolunay Orkun <listmember@orkun.us> Signed-off-by: Stefan Roese <sr@denx.de>
* | [PATCH] NAND: Partition name support added to NAND subsystemStefan Roese2006-10-28-9/+2
| | | | | | | | | | | | | | | | chpart, nboot and NAND subsystem related commands now accept also partition name to specify offset. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | Fix TSEC driver (now for real): avoid crashes if PHY is not attachedBen Warren2006-10-26-3/+6
| | | | | | | | | | | | | | to a TSEC (e.g. a switch is connected via RMII) or if the PHY is defective/incorrectly configured. Signed-off-by: Ben Warren <bwarren@qstreams.com>
* | Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-10-24-1/+403
|\ \
| * | Add common serial driver for Atmel AT32 and AT91 chipsWolfgang Denk2006-10-24-1/+403
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Haavard Skinnemoen, 06 Sep 2006 This is a first attempt at creating a common serial driver for Atmel chips. For now, it supports the AT32AP7000 AVR32 chip, but it should be possible to support AT91RM9200 and other ARM-based chips with some minor modifications. There's nothing fundamentally AVR32-specific in this driver, but it does use some features which are currently only defined for the AT32AP CPU port: * pm_get_clock_freq: Obtain the clock frequency of a given domain * gd->console_uart: A "struct device" containing information about register mappings, gpio resources and clocks associated with the UART device. For more information about these features, please see the "AT32AP CPU" patch.
* | | Merge with http://www.jdl.com/software/u-boot-86xx.gitWolfgang Denk2006-10-20-384/+1480
|\ \ \ | |/ / |/| |
| * | Converted all 85xx boards to use a common FSL I2C driver.Jon Loeliger2006-10-20-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | Introduced COFIG_FSL_I2C to select the common FSL I2C driver. And removed hard i2c path from a few u-boot.lds scipts too. Minor whitespace cleanups along the way. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | Rewrite a series of goto statements as a sequences ofJon Loeliger2006-10-19-31/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | conditional expressions instead. Use consistent return code 0/-1 for good/bad indicators. Include one fewer file if the driver isn't used at all. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.cJon Loeliger2006-10-19-1/+249
| | | | | | | | | | | | | | | | | | | | | in an effort to begin to unify the umpteen FSL I2C drivers that are all otherwise very similar. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-10-12-3/+3
| |\ \
| * | | Remove unneeded include files and local variable.Jon Loeliger2006-10-12-3/+0
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-10-11-1/+870
| |\ \ \
| * \ \ \ Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-10-10-8/+7
| |\ \ \ \
| * | | | | Ran lindent and cleaned up whitespace issues.Jon Loeliger2006-10-10-441/+455
| | | | | | | | | | | | | | | | | | | | | | | | Format for 80-columns too.
| * | | | | Merge branch 'mpc85xx'Jon Loeliger2006-09-19-13/+77
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/tsec.c
| | * | | | | Add support for eTSEC 3 & 4 on 8548 CDSAndy Fleming2006-09-19-10/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. This will only work on rev 1.3 boards (but doesn't break older boards) * Cleaned up some comments to reflect the expanded role of tsec in other systems
| * | | | | | Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-09-19-29/+211
| |\ \ \ \ \ \ | | | |_|_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/stxxtc/Makefile
| * | | | | | Merge branch 'mpc86xx'Jon Loeliger2006-08-23-142/+138
| |\ \ \ \ \ \
| | * | | | | | Cleanup and lindent new AHCI driver.Jon Loeliger2006-08-23-142/+138
| | | | | | | |
generated by cgit v1.1 at 2024-12-25 07:32:54 +0000