summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* Merge branch 'tpm' of git://git.denx.de/u-boot-x86Tom Rini2013-06-05-280/+462
|\
| * tpm: Reorganize the I2C TPM driverTom Wai-Hong Tam2013-06-03-268/+383
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does a similar code reogranzation from http://patchwork.ozlabs.org/patch/132179/ which is based on an old version of code (fdt support and bus selection still not in). It merges this tidy-up on top of the recent code. It does not make any logical change. tpm.c implements the interface defined in tpm.h based on underlying LPC or I2C TPM driver. tpm.c and the underlying driver communicate throught tpm_private.h. Note: Merging the LPC driver with tpm.c is left to future patches. Change-Id: Ie1384f5f9e3935d3bc9a44adf8de80c5a70a5f2b Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
| * tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)Vincent Palatin2013-06-03-23/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Infineon's new SLB 9645 TT 1.2 I2C TPMs, which supports clockstretching, combined reads and a bus speed of up to 400khz. The device also has a new device id. This is based on the kernel patch provided by Infineon : https://gerrit.chromium.org/gerrit/42332 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Tested-by: Tom Wai-Hong Tam <waihong@chromium.org> Tested-by: Vincent Palatin <vpalatin@chromium.org>
| * tpm: Rename generic_lpc_tpm to tpm_tis_lpcChe-liang Chiou2013-06-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | The new name is more aligned with Linux kernel's naming of TPM driver. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Wai-Hong Tam <waihong@chromium.org>
* | input: simplify key_matrix_decode_fdt()Stephen Warren2013-06-04-40/+26
| | | | | | | | | | | | | | | | | | We know the exact property names that the code wants to process. Look these up directly with fdt_get_property(), rather than iterating over all properties within the node, and checking each property's name, in a convoluted fashion, against the expected name. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | input: fix unaligned access in key_matrix_decode_fdt()Stephen Warren2013-06-04-1/+1
|/ | | | | | | | | | | | | Initialized character arrays on the stack can cause gcc to emit code that performs unaligned accessess. Make the data static to avoid this. Note that the unaligned accesses are made when copying data to prefix[] on the stack from .rodata. By making the data static, the copy is completely avoided. All explicitly written code treats the data as u8[], so will never cause any unaligned accesses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2013-05-31-1518/+1834
|\
| * mtd: resync with Linux-3.7.1Sergey Lapin2013-05-31-1494/+1772
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is essentially an update of u-boot MTD subsystem to the state of Linux-3.7.1 with exclusion of some bits: - the update is concentrated on NAND, no onenand or CFI/NOR/SPI flashes interfaces are updated EXCEPT for API changes. - new large NAND chips support is there, though some updates have got in Linux-3.8.-rc1, (which will follow on top of this patch). To produce this update I used tag v3.7.1 of linux-stable repository. The update was made using application of relevant patches, with changes relevant to U-Boot-only stuff sticked together to keep bisectability. Then all changes were grouped together to this patch. Signed-off-by: Sergey Lapin <slapin@ossfans.org> [scottwood@freescale.com: some eccstrength and build fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand/fsl_ifc: Convert to self-initPrabhakar Kushwaha2013-05-22-5/+37
| | | | | | | | | | | | Convert NAND IFC driver to support CONFIG_SYS_NAND_SELF_INIT. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
| * mtd: nand: use ssize_t instead of size_t to prevent infinite loophtbegin2013-05-22-1/+2
| | | | | | | | | | | | | | | | | | | | | | When a all 0xFF buffer is passed to drop_ffs, the no-0xFF check loop will loop forever. After the fix, If ssize_t i = -1 and size_t l = i + 1, the value of l will still be 0 as expected. Signed-off-by: Tao Hou <hotforest@gmail.com> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: Scott Wood <scottwood@freescale.com>
| * mtd: nand: fix the partial page write conditionhtbegin2013-05-22-1/+1
| | | | | | | | | | | | | | When writelen is mtd->writesize - 1, it is still a partial page write Signed-off-by: Tao Hou <hotforest@gmail.com> Cc: Scott Wood <scottwood@freescale.com>
| * nand/fsl_elbc: detect page size at runtimeScott Wood2013-05-22-17/+22
| | | | | | | | | | | | | | | | | | | | | | This avoids needing a separate U-Boot config when some revisions of a board have small-page NAND and other revisions have large-page NAND (except for NAND SPL targets). CONFIG_FSL_ELBC_FMR is removed -- it was never used nor documented, and it gets in the way of this change. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-30-1030/+1976
|\ \ | | | | | | | | | | | | | | | Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
| * | sf: spansion: Add support for S25FL128SXie Xiaobo2013-05-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | SPANSION recommend S25FL128S supersedes S25FL129P, and the two flash memory have the same device ID and Memory architecture. So they can use the same config parameters. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Enable XAUI interface for B4860QDSSuresh Gupta2013-05-24-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Added SERDES2 PRTCLs = 0x98, 0x9E - Default Phy Addresses for Teranetics PHY on XAUI card The PHY addresses of Teranetics PHY on XAUI riser card are assigned based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1 and slot2 - Configure MDIO for 10Gig Mac Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | net/phy: fix select line for TN80xxShaohui Xie2013-05-24-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TN80xx has same PHY ID as TN2020, but it needs different setting to register 30.93 which used to select line, so we read register 30.32 which has bit 15:12 to indicate PHY hardware version, for TN20xx we will get 3 or 2, for TN80xx we will get 5 or 4. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | cfi_flash: return NULL for invalid base address inputMasahiro Yamada2013-05-23-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When base address given was out of valid flash address ranges, flash_get_info() function returned the pointer to the last element of flash_info[i] array. This patch changes this function to return NULL pointer in such a case, which is more correct behaviour. The function flash_protect_default() calls flash_protect() immediately after flash_get_info() invocation. With this correction, flash_protect() function would be able to return soon, for NULL flash_info. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | cosmetic: cfi_flash: delete a space after an unary operatorMasahiro Yamada2013-05-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Linux Kernel Documentation/CodingStyle says: Do not add a space after unary operators such as &, *, ... Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | cfi_flash: Fix unaligned accesses to cfi_qry structureAndrew Gabbasov2013-05-23-6/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Packed structure cfi_qry contains unaligned 16- and 32-bits members, accessing which causes problems when cfi_flash driver is compiled with -munaligned-access option: flash initialization hangs, probably due to data error. Since the structure is supposed to replicate the actual data layout in CFI Flash chips, the alignment issue can't be fixed in the structure. So, unaligned fields need using of explicit unaligned access macros. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-By: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Stefan Roese <sr@denx.de>
| * powerpc/esdhc: Correct judgement for DATA PIO modeHaijun.Zhang2013-05-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The logic for the whether to configure for polling or DMA was mistakenly reversed in this patch: Commit 7b43db92110ec2f15c5f7187a165f2928464966b drivers/mmc/fsl_esdhc.c: fix compiler warnings Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> CC: Sun Yusong-R58495 <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * mmc: update Faraday FTSDC010 for rw performanceKuo-Jung Su2013-05-15-688/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Faraday FTSDC010 is a MMC/SD host controller. Although there is already a driver in current u-boot release, which is modified from eSHDC and contributed by Andes Tech. Its performance is too terrible on Faraday A36x SoC platforms, so I turn to implement this new version of driver which is 10+ times faster than the old one. It's carefully designed to be compatible with Andes chips, so it should be safe to replace it. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Andy Fleming <afleming@gmail.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxTom Rini2013-05-15-4/+113
| |\
| | * T4/usb: move usb 2.0 utmi dual phy init code to cpu_init.cRoy Zang2013-05-14-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is what we have done for the UTMI PHY on P3041/P5020. Then the PHY initialization can be reused in kernel without “usb start” command. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * net/phy: add VSC8574 supportShaohui Xie2013-05-14-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. This driver supports SGMII and QSGMII MAC mode. For now SGMII mode is tested. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * net/fm: fixup ethernet for mEMACShengzhou Liu2013-05-14-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | - set proper compatible property name for mEMAC. - fixed ft_fixup_port for dual-role mEMAC, which will lead to MAC node disabled incorrectly. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * powerpc/mpc85xx: Add T4160 SoCYork Sun2013-05-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4160 SoC is low power version of T4240. The T4160 combines eight dual threaded Power Architecture e6500 cores and two memory complexes (CoreNet platform cache and DDR3 memory controller) with the same high-performance datapath acceleration, networking, and peripheral bus interfaces. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * T4/USB: Add USB 2.0 UTMI dual phy supportRoy Zang2013-05-14-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240 internal UTMI phy is different comparing to previous UTMI PHY in P3041. This patch adds USB 2.0 UTMI Dual PHY new memory map and enable it for T4240. The phy timing is very sensitive and moving the phy enable code to cpu_init.c will not work. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * Fman/t4240: some fix for 10G XAUIShaohui Xie2013-05-14-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. fix 10G mac offset by plus 8; 2. add second 10G port info for FM1 & FM2 when init ethernet info; 3. fix 10G lanes name to match lane protocol table; Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-15-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
| * | drivers/mmc: move spl_mmc.c to common/splYing Zhang2013-05-15-140/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc85xx repuires a special layout on the memory device that is connected to the eSDHC controller interface. But the file spl_mmc.c didn't handle this specfic case, there needs a special treatmen, in the powerpc drictory. So, there is no longer to keep spl_mmc.c on mpc85xx, CONFIG_SPL_FRAMEWORK is not set. When CONFIG_SPL_MMC_SUPPORT is set and CONFIG_SPL_FRAMEWORK is not set, there was an error in drivers/mmc/spl_mmc.c: drivers/mmc/libmmc.o:(.got2+0x8): undefined reference to `spl_image'. Now, the solution is to move the file "spl_mmc.c" to directory "common/spl". Signed-off-by: Ying Zhang <b40530@freescale.com>
| * | smc911x: fix the timeout detectionMasahiro Yamada2013-05-15-2/+2
| | | | | | | | | | | | | | | | | | | | | If timeout is occurred at the while loop above, the value of 'timeout' is -1, not 0. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | OMAP5: Enable USB Ethernet support with LAN9730Lubomir Popov2013-05-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Added the LAN9730 to list of supported devices. This chip is used in the sEVM, uEVM and som5_evb. Tested on the som5_evb with dhcp and ping. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
| * | bfin: Move gpio support for bf54x and bf60x into the generic driver folder.Sonic Zhang2013-05-13-0/+441
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx. A lot of machine macros are used to accomodate both code in one gpio driver. This patch split the old gpio driver and move new gpio2 support to the generic gpio driver folder. - To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's config header file. - The gpio2 driver supports bf54x, bf60x and future ADI processors, while the older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561. - All blackfin specific gpio function names are replaced by the generic gpio APIs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | blackfin: The buf variable in bfin_mac.c is not used and produces warning,Marek Vasut2013-05-13-2/+0
| | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang2013-05-13-0/+412
| | | | | | | | | | | | | | | | | | | | | | | | - Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | blackfin: Move blackfin watchdog driver out of the blackfin arch folder.Sonic Zhang2013-05-13-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Enable hw_watchdog_init() in watchdog.h if CONFIG_HW_WATCHDOG is defined. - Move blackfin hw watchdog driver to the generic driver folder. - Call hw_watchdog_init() from blackfin board init code. - Reuse macro CONFIG_WATCHDOG_TIMEOUT_MSECS - Update README.watchdog accordingly Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | bfin: discard invalid data and clear RXS in bf5xx spi driverScott Jiang2013-05-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | There may be dirty data in RDBR, so we should discard invalid data. This operation also clears RXS bit in STAT register. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | bfin: Remove spi dma function in bf5xx.Scott Jiang2013-05-13-102/+1
| |/ | | | | | | | | | | | | | | | | BF5xx rx dma causes spi flash random read error. Accually spi controller has problems both on tx and rx dma. So remove spi dma support in u-boot. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * gpio: Add support for microblaze xilinx GPIOMichal Simek2013-05-09-0/+365
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microblaze uses gpio which is connected to the system reset. Currently gpio subsystem wasn't used for it. Add gpio driver and change Microblaze reset logic to be done via gpio subsystem. There are various configurations which Microblaze can have that's why gpio_alloc/gpio_alloc_dual(for dual channel) function has been introduced and gpio can be allocated dynamically. Adding several gpios IP is also possible and supported. For listing gpio configuration please use "gpio status" command This patch also remove one compilation warning: microblaze-generic.c: In function 'do_reset': microblaze-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-mmcTom Rini2013-05-07-39/+157
| |\
| | * mmc: fsl_esdhc: Use calloc()Fabio Estevam2013-05-06-2/+1
| | | | | | | | | | | | | | | | | | | | | A malloc() followed by memset() can be simply replaced by calloc(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * mmc: sdhci: return error when failed add_sdhci().Jaehoon Chung2013-05-06-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | If failed the add_host(), it is reasonable that return value of add_sdhci(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * sdhci: Add sdhci support for spear devicesVipin Kumar2013-05-06-0/+45
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * davinci, mmc: Added a delay reading ext CSD registerDavide Bonfanti2013-05-06-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this additional delay, some eMMC don't negotiate properly bus width Tested on: - Toshiba THGBM2G8D8FBAIB - Toshiba THGBM4G4D1HBAR - Micron MTFC4GMVEA (the one giving the problem) - Hynix H26M64002BNR - SanDisk SDIN5E1-32G Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * mmc: Split device init to decouple OCR-polling delayChe-Liang Chiou2013-05-06-32/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of time that MMC driver spends on initializing a device is polling OCR (operation conditions register). To decouple this polling loop, device init is split into two parts: The first part fires the OCR query command, and the second part polls the result. So the caller is now no longer bound to the OCR-polling delay; he may fire the query, go somewhere and then come back later for the result. To use this, call mmc_set_preinit() on any device which needs this. This can save significant amounts of time on boot (e.g. 200ms) by hiding the MMC init time behind other init. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | usb: common: Use a global definition for 'min3'Vivek Gautam2013-05-06-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | We can use a common global method for calculating minimum of 3 numbers. Put the same in 'common header' and let 'ehci' use it. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Tom Rini <trini@ti.com>
| * | USB: ohci-at91: make OHCI work on at91sam9g10 SoCBo Shen2013-05-05-2/+2
| | | | | | | | | | | | | | | | | | The at91sam9g10 need to configure HCK0 to make OHCI work Signed-off-by: Bo Shen <voice.shen@atmel.com>
| * | usb: Add new command to set USB 2.0 port test modesJulius Werner2013-05-05-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new 'usb test' command, that will set a port to a USB 2.0 test mode (see USB 2.0 spec 7.1.20). It supports all five test modes on both downstream hub ports and ordinary device's upstream ports. In addition, it supports EHCI root hub ports. Signed-off-by: Julius Werner <jwerner@chromium.org>
| * | USB: EHCI: Add weak functions to support new chipJim Lin2013-05-05-12/+28
| |/ | | | | | | | | | | | | Add ehci_get_port_speed() and ehci_set_usbmode() weak functions for platform driver to support new chip. Signed-off-by: Jim Lin <jilin@nvidia.com>
* | USB: ohci-at91: support sama5d3x devicesBo Shen2013-05-21-2/+12
| | | | | | | | | | | | | | Add OHCI support for sama5d3x devices Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
generated by cgit v1.1 at 2024-12-25 23:21:57 +0000