summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* mmc: Remove unused item flags in struct mmc_cmdKaspter Ju2012-09-02-28/+0
| | | | Signed-off-by: Kaspter Ju <nigh0st3018@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2012-09-02-135/+1799
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-usb: MUSB driver: Timeout is never detected as the while loop does not end usb: fix ulpi_set_vbus prototype pxa25x: Add UDC registers definitions USB: Fix strict aliasing in ohci-hcd usb: Optimize USB storage read/write ehci: Optimize qTD allocations usb_stor_BBB_transport: Do not delay when not required usb_storage: Remove EHCI constraints usb_storage: Restore non-EHCI support ehci-hcd: Boost transfer speed ehci: cosmetic: Define used constants ehci: Fail for multi-transaction interrupt transfers arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS arm:trats: Support for USB UDC driver at TRATS board. dfu:cmd: Support for DFU u-boot command dfu: MMC specific routines for DFU operation dfu: DFU backend implementation dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget dfu:usb: Support for g_dnl composite download gadget. ehci: cosmetic: Define the number of qt_buffers Signed-off-by: Wolfgang Denk <wd@denx.de>
| * MUSB driver: Timeout is never detected as the while loop does not endMatej Frančeškin2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Timeout variable is decremented once more when while condition is not met. Following "if" does not detect correctly that timeout has occurred. Because of this bug the "usb start" command on AM335X-EVM board did not detect correctly that USB device was not attached. timeout = musb_cfg.timeout; while (timeout--) if (readb(&musbr->devctl) & MUSB_DEVCTL_HM) break; /* if musb core is not in host mode, then return */ if (!timeout) return -1; Signed-off-by: Matej Franceskin <Matej.Franceskin@comtrade.com> CC: Marek Vasut <matex@denx.de>?
| * USB: Fix strict aliasing in ohci-hcdTroy Kisky2012-09-01-39/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5f6aa03fda2a0a79940765865c1e4266be8a75f8 USB: Fix complaints about strict aliasing in OHCI-HCD tried to fix this, but gcc4.4 still complains. So, this patch basically reverts the above and does a simpler fix. also, the above commit incorrectly changed /* corresponds to data_buf[4-7] */ datab [1] = 0; to /* corresponds to databuf.u8[4-7] */ databuf.u8[1] = 0; This patch also fixes that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * ehci: Optimize qTD allocationsBenoît Thébaudeau2012-09-01-30/+37
| | | | | | | | | | | | | | | | | | | | Relax the qTD transfer alignment constraints in order to need less qTDs for buffers that are aligned to 512 bytes but not to pages. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
| * ehci-hcd: Boost transfer speedBenoît Thébaudeau2012-09-01-29/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch takes advantage of the hardware EHCI qTD queuing mechanism to avoid software and transfer splitting overhead so as to make transfers as fast as possible. The only drawback is a call to memalign. However, this is fast compared to the transfer timings, and the heap size to allocate is small, e.g. 128 kiB in the worst case for a transfer length of 65535 packets of 512 bytes. Tested on i.MX25, i.MX35 and i.MX51. In my test conditions, the speed gain was very significant (several times faster), which is really appreciable when accessing large files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
| * ehci: cosmetic: Define used constantsBenoît Thébaudeau2012-09-01-69/+118
| | | | | | | | | | | | | | | | | | Make some light cosmetic code cleanup by the way. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
| * ehci: Fail for multi-transaction interrupt transfersBenoît Thébaudeau2012-09-01-1/+10
| | | | | | | | | | | | | | | | | | | | | | Interrupt transfers requiring several transactions are not supported by submit_int_msg() because bInterval is ignored. This patch returns a failure code and prints an error message in this case. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
| * dfu: MMC specific routines for DFU operationLukasz Majewski2012-09-01-0/+163
| | | | | | | | | | | | | | | | Support for MMC storage devices to work with DFU framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * dfu: DFU backend implementationLukasz Majewski2012-09-01-0/+281
| | | | | | | | | | | | | | | | | | | | New, separate driver at ./drivers/dfu has been added. It allows platform and storage independent operation of DFU. It has been extended to use new MMC level of command abstraction. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadgetLukasz Majewski2012-09-01-0/+850
| | | | | | | | | | | | | | | | Support for f_dfu USB function. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * dfu:usb: Support for g_dnl composite download gadget.Lukasz Majewski2012-09-01-0/+203
| | | | | | | | | | | | | | | | | | Composite USB download gadget support (g_dnl) for download functions. This code works on top of composite gadget. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
| * ehci: cosmetic: Define the number of qt_buffersBenoît Thébaudeau2012-09-01-7/+8
| | | | | | | | | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* | pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup doneAndrew Sharp2012-09-02-10/+25
| | | | | | | | | | | | | | | | | | | | | | Introduce CONFIG_PCI_ENUM_ONLY variable for platforms that just want a quick enumberation of the PCI devices, but don't need any setup work done. This is very beneficial on platforms that have u-boot loaded by another boot loader which does a more sophisticated job of setup of PCI devices than u-boot. That way, u-boot can just read what's there and get on with life. This is what SeaBIOS does. Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
* | pci: minor cleanup of CONFIG_PCI_PNP usageAndrew Sharp2012-09-02-6/+6
| | | | | | | | | | | | | | | | | | Refactor the common PCI code just a tiny bit surrounding the PCI_PNP (pciauto) stuff. Makes the code a tiny bit easier to read, and also makes it more obvious that almost no platform needs to setup or use the pci_config_table stuff. Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
* | pci: clean up some whitespace and formattingAndrew Sharp2012-09-02-70/+91
| | | | | | | | | | | | | | | | | | | | | | I tried to clean up the white space and formatting offenses and inconsistencies in the generic PCI code that obviously has been around for some time. Emphasis on large increases in readability and maintainability and consistency. I omitted the platform/processor specific files in the drivers/pci directory because I wanted to leave those file to those that care more about them. Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
* | pci: fix errant data types and corresponding access functionsAndrew Sharp2012-09-02-10/+12
| | | | | | | | | | | | | | | | In a couple of places, unsigned int and pci_config_*_dword were being used when u16 and _word should be used. Unsigned int was also being used in a couple of places that should be pci_addr_t. Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
* | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2012-09-02-3/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: tx25: Use generic gpio_* calls config: Always use GNU ld tools: add kwboot binary to .gitignore file fdt: Include arch specific gpio.h instead of asm-generic/gpio.h serial: CONSOLE macro is not used Conflicts: board/karo/tx25/tx25.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | serial: CONSOLE macro is not usedMichal Simek2012-08-10-3/+0
| | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | | at91: atmel_nand: Update driver to support Programmable Multibit ECC controllerWu, Josh2012-09-01-1/+792
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller can be used to support both SLC and MLC NAND Flash devices. It supports to generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data. To use PMECC in this driver, the user needs to set the PMECC correction capability, the sector size and ROM lookup table offsets in board config file. This driver is ported from Linux kernel atmel_nand PMECC patch. The main difference is in this version it uses registers structure access hardware instead of using macros. It is tested in 9x5 serial boards. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | at91: atmel_nand: remove unused variables.Wu, Josh2012-09-01-2/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | at91: atmel_nand: extract HWECC initialization code into one function: ↵Wu, Josh2012-09-01-58/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | atmel_hw_nand_init_param(). This patch 1. extract the hwecc initialization code into one function. It is a preparation for adding atmel PMECC support. 2. enable CONFIG_SYS_NAND_SELF_INIT. Which make us can configurate the ecc parameters between nand_scan_ident() and nand_scan_tail(). Signed-off-by: Josh Wu <josh.wu@atmel.com> [fix empty newline at EOF error and move return value check into ifdef] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | spi: atmel: add WDRBT bit to avoid receive overrunBo Shen2012-09-01-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The atmel at91sam9x5 series spi has feature to avoid receive overren Using the patch to enable it Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | AT91: Small fix on AT91 USART initialization codeXu, Hong2012-09-01-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before reset dbgu transmitter, we just wait TXEMPTY to drain the transmitter register(Just in case). If not doing this, we may sometimes see several weird characters from DBGU. A short delay is also added to make sure the new serial settings are settled. Signed-off-by: Hong Xu <hong.xu@atmel.com> [cherry-picked from u-boot-atmel/old-next] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | fsl_esdhc: Remove cache snooping for i.MXBenoît Thébaudeau2012-09-01-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so disable it globally for this architecture. This avoids setting no_snoop for all i.MX boards, and it prevents setting a reserved bit of a reserved register if fsl_esdhc_mmc_init() is used on i.MX, like in arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init(). Since no_snoop was only used on i.MX, get rid of it BTW. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com>
* | | MX28: SPI: Supercharge the SPI driverMarek Vasut2012-09-01-31/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change implements DMA chaining into SPI driver. This allows the transfers to go much faster, while also fixing SF issues. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* | | MX28: DMA: Prolong the DMA timeoutMarek Vasut2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Load from SPI flash can create a long DMA chain, which can take long time to transfer. Change the DMA timeout to roughly 10s to prevent such long chains misreporting errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* | | gpio: add gpio api support to mx27 (v4)trem2012-09-01-3/+5
| | | | | | | | | | | | | | | | | | | | | The gpio api has been tested on an armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | | mxc: Make gpio_get_value() use PSRBenoît Thébaudeau2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpio_get_value() should use PSR like Linux, not DR, because DR does not always reflect the pin state, while PSR does. This is especially useful to detect a short circuit on a GPIO pin configured as output, or to read the level of a pin controlled by a non-GPIO IOMUX function. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | | spi: fix mxs_spi_slave structure allocation to clear memoryMatt Sealey2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use calloc() instead of malloc() to allocate the mxs_spi_slave structure. Clearing the memory is necessary since most of the time this gets done super early in boot, but on warm reboots, and when SPI probing is done long after the init stages it could actually pick up previously used memory, and things like the chipselect polarity and other data end up being filled with trash data if not explicitly set by the board files. This solves a semi-random, almost unreproducable error whereby SPI devices act very, very strangly on boot. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | spi: fix mxc_spi_slave structure allocation to clear memoryMatt Sealey2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use calloc() instead of malloc() to allocate the mxc_spi_slave structure. Clearing the memory is necessary since most of the time this gets done super early in boot, but on warm reboots, and when SPI probing is done long after the init stages it could actually pick up previously used memory, and things like the chipselect polarity and other data end up being filled with trash data if not explicitly set by the board files. This solves a semi-random, almost unreproducable error whereby SPI devices act very, very strangly on boot. Tested on Efika MX over several years.. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | mxc_spi: Round up clock dividerBenoît Thébaudeau2012-09-01-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the input frequency of the API is a maximum that should not be exceeded in order for the devices to operate properly, the SPI clock divider should be rounded up, not truncated. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | | rtc: add support of mx27 rtctrem2012-09-01-0/+84
| | | | | | | | | | | | | | | | | | | | | This driver has been tested on board armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* | | mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador2012-09-01-13/+13
| | | | | | | | | | | | | | | | | | | | | The sys_proto.h functions (except the boot modes) are compatible with i.MX233 and i.MX28 so we use 'mxs' prefix for its methods. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | | mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.hOtavio Salvador2012-09-01-1/+1
| | | | | | | | | | | | | | | | | | | | | The CLKCTRL registers are SoC specific so we ought to have it clear on filename. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | | video: support exynos pwm backlight driverDonghwa Lee2012-09-01-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | video: exynos fb driver supports display port featureDonghwa Lee2012-09-01-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If dp_enabled was set, exynos fb driver support display port feature. This patch depends on [PATCH] video: support exynos fimd driver for various exynos series. http://marc.info/?l=u-boot&m=134119605104467&w=2 Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | video: support exynos display port driversDonghwa Lee2012-09-01-0/+2297
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch set supports exynos display port drivers. DisplayPort is an industry standard device to accommodate the increasing board adoption of digital display technology within the PC and consumer electronics. The interface supports internal chip-to-chip and external box-to-box digital display connections. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | video: support exynos fimd driver for various exynos seriesDonghwa Lee2012-09-01-33/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supports exynos fimd driver for various exynos series different from existing it supports only exynos4 chip. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | tegra20: rename tegra2 -> tegra20Allen Martin2012-09-01-40/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | ARM: add basic support for the Broadcom BCM2835 SoCStephen Warren2012-09-01-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | | u8500: Separating mmc config parameters from driverJohn Rigby2012-09-01-83/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration in vexpress and u8500.v1 is different from what is needed in u8500.v2. As such, card configuration specifics need to reside in the board file rather than the driver. Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
* | | snowball: Add support for ux500 based snowball boardMathieu J. Poirier2012-09-01-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefile
* | | arm: omap: Fix switching back to nandecc sw.Jeroen Hofstee2012-09-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Orjan Friberg wrote at [1]: "For the beagleboard, ecc.size is not explicitly set when doing 'nandecc sw'. If it's not set for the NAND_ECC_SOFT case in nand_scan_tail, it's set to 256 bytes. When doing 'nandecc hw', ecc.size is set to 512 bytes. Hence, when changing back to 'nandecc sw' ecc.size remains at 512 bytes and suddenly the format has changed." No patch has been submitted and the issue was still present. This patch adds the mentioned solution. Tested on a tam3517 board. [1] http://lists.denx.de/pipermail/u-boot/2012-February/119002.html cc: Orjan Friberg <of@flatfrog.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
* | | da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-01-103/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also enable the ohci port on hawkboard. These additions result in an increased u-boot size -- adjust the same accordingly in the board's config. Move the usb header for da8xx platforms under arch-davinci. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* | | am335x evm: Enable support for spi0Tom Rini2012-09-01-0/+10
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | | am33xx: Add support, update omap3 McSPI driverTom Rini2012-09-01-0/+11
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | | rtc: imxdi: Initial supportBenoît Thébaudeau2012-09-01-0/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale's i.MX DryIce RTC, present on i.MX25. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | | MX28: Fix MXS MMC DMA issuesMarek Vasut2012-09-01-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA didn't work properly because the DMA descriptor wasn't properly cleaned after it was used once. Also, the DMA_ENABLE bit was enabled/disabled too late. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
* | | MX28: Transfer small blocks via PIO in MXS MMCMarek Vasut2012-09-01-26/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Large blocks (> 512b) shall be transfered via DMA to make things a bit faster. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
generated by cgit v1.1 at 2024-12-28 09:34:52 +0000