summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* mmc: Fix interpretation of MMC_CMD_ALL_SEND_CIDTaylor Hutt2012-11-27-7/+9
| | | | | | | | | | | | The interpretation of the data returned by the MMC_CMD_ALL_SEND_CID command was incorrect with respect to the JEDEC Standard No. 84-A441. This change makes the interpretation correct with respect to the defined fields of the CID register. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* EXYNOS: mmc: support DesignWare Controller for Samsung-SoCJaehoon Chung2012-11-27-0/+58
| | | | | | | | | Support DesignWare MMC Controller for Samsung Specific. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rajeshawari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Remove obsolete header filePantelis Antoniou2012-11-27-1/+0
| | | | | | | usbdescriptors.h conflicts with linux/usb/ch9.h Remove it. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2012-11-26-380/+426
|\
| * nand: Add torture featureBenoît Thébaudeau2012-11-26-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a NAND Flash torture feature, which is useful as a block stress test to determine if a block is still good and reliable (or should be marked as bad), e.g. after a write error. This code is ported from mtd-utils' lib/libmtd.c. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Scott Wood <scottwood@freescale.com> [scottwood@freescale.com: removed unnec. ifdef and unwrapped error strings] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand: Fix nand_erase_opts() offset checkBenoît Thébaudeau2012-11-26-2/+2
| | | | | | | | | | | | | | NAND Flash is erased by blocks, not by pages. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Scott Wood <scottwood@freescale.com>
| * nand: Clean up nand_utilBenoît Thébaudeau2012-11-26-32/+32
| | | | | | | | | | | | | | | | | | | | | | This patch cleans up nand_util.c: - Fix tabs. - Fix typos. - Remove space character before opening parenthesis in function calls. - Fix comments. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Scott Wood <scottwood@freescale.com>
| * nand: Move the sub-page read support enable to a flagJoe Hershberger2012-11-26-2/+7
| | | | | | | | | | | | | | | | | | Use a flag instead of a hard-coded macro so that sub-page reads can be enabled in other cases (such as on-die ecc). This is the same as a5ff4f102937a3492bca4a9ff0c341d78813414c in Linux Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * driver/mtd:IFC NAND:Initialise internal SRAM before any writePrabhakar Kushwaha2012-11-26-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IFC-1.1.0 uses 28nm techenology for SRAM. This tech has known limitaion for SRAM i.e. "byte select" is not supported. Hence Read Modify Write is implemented in IFC for any "system side write" into sram buffer. Reading an uninitialized memory results in ECC Error from sram wrapper. Hence we must initialize/prefill SRAM buffer by any data before writing anything in SRAM from system side. To initialize SRAM user can use "READID" NAND command with read bytes equal to SRAM size. It will be a one time activity post boot Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [scottwood@freescale.com: fix fsl_ifc_sram_init prototype] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC driversScott Wood2012-11-26-2/+2
| | | | | | | | | | | | These controllers can only do hardware ECC on full page transfers. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * spl/nand: config symbol documentationScott Wood2012-11-26-0/+172
| | | | | | | | | | | | | | | | | | | | | | | | Document parameters used for specifying the NAND image to be loaded. Also fix the definition of CONFIG_SPL_NAND_SIMPLE -- it's only nand_spl_simple.c, not the entire nand directory. The word "simple" is there for a reason. :-) Signed-off-by: Scott Wood <scottwood@freescale.com> --- v2: updated for makefile changes earlier in patchset
| * spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.Scott Wood2012-11-26-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some small SPLs do not use nand_base.c, and a subset of those also require a special driver. Some SPLs need software ECC but others can't fit it. All existing boards that specify CONFIG_SPL_NAND_SUPPORT have these symbols added to preserve existing behavior. Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: use positive logic for including bits of NAND, rather than a MINIMAL symbol that excludes things.
| * powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxxScott Wood2012-11-26-334/+0
| | | | | | | | | | | | | | | | | | | | | | It's arch code and not a driver, so move it where it belongs. When it originally went into drivers/misc there was no 8xxx CPU directory. This will make new-SPL support a little easier since we can keep the CPU stuff together and not need to pull stuff in from drivers/misc. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
| * serial/ns16550: wait for TEMT before initializingScott Wood2012-11-26-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | TEMT is set when the transmitter is totally empty and all output has finished. This prevents output problems (including a loss of synchronization observed on p2020 that persisted for quite a while) if SPL has output still on its way out. Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: fixed typo in subject, and explained what the bit does in the changelog
| * serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONSScott Wood2012-11-26-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_NS16550_MIN_FUNCTIONS is used by small SPLs to gain access to basic ns16550 output code without pulling in things not needed by the SPL. This previously only worked with non-MULTI configs. Recently MULTI was made mandatory, and MIN_FUNCTIONS fails like this: drivers/serial/libserial.o: In function `calc_divisor.clone.0': serial_ns16550.c:(.text.calc_divisor.clone.0+0x24): undefined reference to `get_bus_freq' drivers/serial/libserial.o: In function `_serial_getc': (.text._serial_getc+0x30): undefined reference to `NS16550_getc' drivers/serial/libserial.o: In function `_serial_tstc': (.text._serial_tstc+0x30): undefined reference to `NS16550_tstc' drivers/serial/libserial.o: In function `_serial_setbrg': (.text._serial_setbrg+0x3c): undefined reference to `NS16550_reinit' make[1]: *** [/tmp/u-boot/spl/u-boot-spl] Error 1 make: *** [/tmp/u-boot/spl/u-boot-spl.bin] Error 2 With MIN_FUNCTIONS we don't need anything from this file, so don't build it. The conditional needs to be in the file itself rather than the makefile, because the config symbols are only imported to the makefiles once, not separately for the SPL phase of the build. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | usb: r8a6659: Fix build by missing of parenthesisNobuhiro Iwamatsu2012-11-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By commit c7e3b2b5, this was chanded to support multiple controllers. But this has missing of parenthesis. This commit fix it. ----- r8a66597-hcd.c: In function ‘usb_lowlevel_init’: r8a66597-hcd.c:911:52: error: expected declaration specifiers before ‘)’ token r8a66597-hcd.c:935:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or‘__attribute__’ before ‘{’ token r8a66597-hcd.c:939:1: error: expected ‘{’ at end of input ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Lucas Stach <dev@lynxeye.de>
* | usb: r8a66597: Switched from variable to only macroNobuhiro Iwamatsu2012-11-20-10/+5
| | | | | | | | | | | | | | | | Some variables are initialized with a value defined by macro. This was changed to use the macro directly. And the variable not to use deleted it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | musb-new: omap2plus backend driverIlya Yanok2012-11-20-0/+692
| | | | | | | | | | | | | | Backend driver for MUSB OTG controllers found on TI OMAP2/3/4 (tested only on OMAP3 Beagle). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | musb-new: am35x backend driverIlya Yanok2012-11-20-0/+711
| | | | | | | | | | | | | | | | | | | | | | | | | | Backend driver for MUSB OTG controllers found on TI AM35x. It seems that on AM35X interrupt status registers can be updated _before_ core registers. As we don't use true interrupts in U-Boot and poll interrupt status registers instead this can result in interrupt handler being called with non-updated core registers. This confuses the code and result in hanged transfers. Add a small delay in am35x_interrupt as a workaround. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | musb-new: dsps backend driverIlya Yanok2012-11-20-0/+772
| | | | | | | | | | | | | | Backend driver for MUSB OTG controllers found on TI AM33xx and TI81xx SoCs (tested with AM33xx only). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | musb-new: port of Linux musb driverIlya Yanok2012-11-20-2/+10690
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | usb: use linux/usb/ch9.h instead of usbdescriptors.hIlya Yanok2012-11-20-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux usb/ch9.h seems to have all the same information (and more) as usbdescriptors.h so use the former instead of the later one. As a consequense of this change USB_SPEED_* values don't correspond directly to EHCI speed encoding anymore, I've added necessary recoding in EHCI driver. Also there is no point to put speed into pipe anymore so it's removed and a bunch of host drivers fixed to look at usb_device->speed instead. Old usbdescriptors.h included is not removed as it seems to be used by old USB device code. This makes usb.h and usbdevice.h incompatible. Fortunately the only place that tries to include both are the old MUSB code and it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute on musb_regs structure but this attribute seems to be unneeded (old MUSB code doesn't support any DMA at all). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | linux/usb/ch9.h: update with the version from Linux treeIlya Yanok2012-11-20-5/+0
|/ | | | Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2012-11-19-1/+72
|\
| * Video: fix compiler warnings in bus_vcxkJens Scharsig (BuS Elektronik)2012-11-14-1/+1
| | | | | | | | | | | | | | if a board uses the vcxk driver option CONFIG_SYS_VCXK_DOUBLEBUFFERD, compilier shows warnings. This patch will fix it. Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
| * video: atmel: implement lcd_setcolreg functionBo Shen2012-11-10-0/+12
| | | | | | | | | | | | | | | | implement the common api lcd_setcolreg in include/lcd.h Signed-off-by: Bo Shen <voice.shen@atmel.com> [agust: fixed commit log and gcc 4.6 -Wparentheses warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * video: Skip bitmaps which do not fit into the screen in cfb_consoleVadim Bendebury2012-11-07-0/+7
| | | | | | | | | | | | | | | | | | | | | | The cfb console driver is trying to prevent bitmaps to spill over the screen, but the calculations assume that at least part of the bitmap fits into the screen area. In reality there could be bitmap elements which are completely out of the screen area, they just need to be discarded. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Implement additional video API functions in cfb_consoleStefan Reinauer2012-11-07-0/+42
| | | | | | | | | | | | | | | | | | Implement the new video API functions to provide access to screen size, etc. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * ipu common: reset ipuv3 correctlyLiu Ying2012-11-06-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch checks self-clear sw_ipu_rst bit in SCR register of SRC controller to be cleared after setting it to high to reset IPUv3. This makes sure that IPUv3 finishes sofware reset. A timeout mechanism is added to stop polling on the bit status in case the bit could not be cleared by the hardware automatically within 10 millisecond. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
* | power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWERŁukasz Majewski2012-11-14-1/+1
| | | | | | | | | | | | | | | | Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWERŁukasz Majewski2012-11-14-10/+10
| | | | | | | | | | | | | | | | Rename all CONFIG_PMIC* defines to CONFIG_POWER* Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* filesŁukasz Majewski2012-11-14-5/+5
| | | | | | | | | | | | | | | | Rename pmic/power related files at ./drivers/power directory Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic: Extend PMIC framework to support battery related commandsŁukasz Majewski2012-11-14-17/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | Two extra commands: "pmic name bat state" and "pmic name bat charge" has been added to pmic framework. Those provides state display and charge capabilities to named batteries. The pmic_core.c file has been refactored to more consistent name scheme. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:max8997: Support for MAX8997 internal charger controlŁukasz Majewski2012-11-14-1/+58
| | | | | | | | | | | | | | | | Support for MAX8997 built-in charger. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:max8997: Function for calculating LDO internal register valueŁukasz Majewski2012-11-14-0/+16
| | | | | | | | | | | | | | | | | | Function for calculating LDO internal register value from passed micro Volt. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:fuel-gauge: Support for MAX17042 fuel-gaugeŁukasz Majewski2012-11-14-0/+297
| | | | | | | | | | | | | | | | | | | | | | | | | | Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997 power management device. Special file - fg_battery_cell_params.h with cells characteristics added. The FG device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:muic: Support for MUIC built into MAX8997 deviceŁukasz Majewski2012-11-14-0/+91
| | | | | | | | | | | | | | | | | | | | | | Support for MUIC (Micro USB Integrated Circuit) built into the MAX8997 power management device. The MUIC device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:battery: Support for Trats Battery at PMIC frameworkŁukasz Majewski2012-11-14-0/+147
| | | | | | | | | | | | | | | | | | | | Trats battery is now treated in the same way as other power related devices. This approach allows for more unified handling of all devices responsible for power management. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic: Move pmic related code to ./drivers/power directoryŁukasz Majewski2012-11-14-10/+57
| | | | | | | | | | | | | | | | The PMIC framework has been moved to its more natural place ./drivers/power from ./drivers/misc directory. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | pmic: Extend PMIC framework to support multiple instances of PMIC devicesŁukasz Majewski2012-11-14-54/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2CŁukasz Majewski2012-11-14-1/+2
| | | | | | | | | | | | | | | | PMIC MAX8997 is now ready to work with single and multibus soft I2C implementation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | pmic:i2c: Add I2C sensor byte order (big/little) to PMIC frameworkŁukasz Majewski2012-11-14-9/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | Since the pmic_reg_read is the u32 value, the order in which bytes are placed to form u32 value is important. Support for big and little sensor endianess is added. Moreover calls to [leXX|beXX]_to_cpu have been added to support little and big endian SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | pmic:i2c: Handle PMIC I2C transmission comprising of two bytesŁukasz Majewski2012-11-14-1/+8
|/ | | | | | | | | This patch adds support for proper handling of a PMIC I2C transmission comprising of two bytes. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-05-16/+395
|\
| * Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD2012-11-03-12/+352
| |\
| | * cfb_console: Add support for some ANSI terminal escape codesPali Rohár2012-10-30-9/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add optional support for some ANSI escape sequences to the cfb_console driver. Define CONFIG_CFB_CONSOLE_ANSI to enable cursor moving, color reverting and clearing the cfb console via ANSI escape codes. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * serial: ns16550: Enable COM5 and COM6Andrew Bradford2012-10-25-3/+33
| | | | | | | | | | | | | | | | | | Increase the possible number of ns16550 serial devices from 4 to 6. Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
| * | tegra: nand: make ONFI detection workLucas Stach2012-10-29-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing bits to the Tegra NAND driver to make ONFI detection work properly. Also add it to the Tegra default config, as it seems to be a reasonable thing to have it available on all boards that use any kind of NAND. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2012-10-27-5/+8
| |\ \
| | * | i.MX video: struct fb_videomode can be constEric Nelson2012-10-16-3/+5
| | | | | | | | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
generated by cgit v1.1 at 2024-12-25 09:03:32 +0000