summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* net: asix: don't pad odd-length TX packetsStephen Warren2014-03-07-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | For Ethernet/USB RX packets, the ASIX HW pads odd-sized packets so that they have an even size. Currently, asix_recv() does remove this padding, and asic_send() adds equivalent padding in the TX path. However, the HW does not appear to need this packing for TX packets in practical testing with "ASIX Elec. Corp. AX88x72A 000001" Vendor: 0x0b95 Product 0x7720 Version 0.1. The Linux kernel does no such padding for the TX path. Remove the padding from the TX path: * For consistency with the Linux kernel. * NVIDIA has a Tegra simulator which validates that the length of USB packets sent to an ASIX device matches the packet length value inside the packet data. Having U-Boot and the kernel do the same thing when creating the TX packets simplifies the simulator's validation. Cc: Lucas Stach <dev@lynxeye.de> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Gerhard Sittig <gsi@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2014-03-04-392/+186
|\
| * mtd: nand: omap: move omap_elm.h from arch/arm/include/asm to drivers/mtd/nandpekon gupta2014-03-04-2/+2
| | | | | | | | | | | | | | | | | | omap_elm.h is a generic header used by OMAP ELM driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
| * mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nandpekon gupta2014-03-04-2/+2
| | | | | | | | | | | | | | | | | | omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms. Hence this file should be present in generic folder instead of architecture specific include folder. Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
| * mtd: nand: omap: merge duplicate GPMC data from different arch-xx headers ↵pekon gupta2014-03-04-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into common omap_gpmc.h Each SoC platform (AM33xx, OMAP3, OMAP4, OMAP5) has its own copy of GPMC related defines and declarations scattered in SoC platform specific header files like include/asm/arch-xx/cpu.h However, GPMC hardware remains same across all platforms thus this patch merges GPMC data scattered across different arch-xx specific header files into single header file include/asm/arch/omap_gpmc.h Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5 Signed-off-by: Pekon Gupta <pekon@ti.com>
| * mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemespekon gupta2014-03-03-90/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chip->ecc.correct() is used for detecting and correcting bit-flips during read operations. In omap-nand driver it implemented as: (a) omap_correct_data(): for h/w based ECC_HAM1 scheme (b) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW for ECC_BCH8 scheme using GPMC and software lib/bch.c (c) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW for ECC_BCH8 scheme using GPMC and ELM This patch updates (c) - checks for calc_ecc[]==0x00 so that error_correction is not required for known good pages. - adds scalability for other ECC_BCHx scheme by merging following omap_rotate_ecc_bch() + omap_fix_errors_bch() => omap_correct_data_bch() - fixing logic for bit-flip correction based on error_loc[count] Signed-off-by: Pekon Gupta <pekon@ti.com>
| * mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemespekon gupta2014-03-03-163/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chip->ecc.calculate() is used for calculating and fetching of ECC syndrome by processing the data passed during Read/Write accesses. All H/W based ECC schemes use GPMC controller to calculate ECC syndrome. But each BCHx_ECC scheme has its own implemetation of post-processing and fetching ECC syndrome from GPMC controller. This patch updates OMAP_ECC_BCH8_CODE_HW ECC scheme in following way: - merges multiple chip->calculate API for different ECC schemes omap_calculate_ecc() + omap_calculate_ecc_bch() + omap_calculate_ecc_bch_sw() ==> omap_calculate_ecc() - removes omap_ecc_disable() and instead uses it as inline. Signed-off-by: Pekon Gupta <pekon@ti.com>
| * mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemespekon gupta2014-03-03-142/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | chip->ecc.hwctl() is used for preparing the H/W controller before read/write NAND accesses (like assigning data-buf, enabling ECC scheme configs, etc.) Though all ECC schemes in OMAP NAND driver use GPMC controller for generating ECC syndrome (for both Read/Write accesses). But but in current code HAM1_ECC and BCHx_ECC schemes implement individual function to achieve this. This patch (1) removes omap_hwecc_init() and omap_hwecc_init_bch() as chip->ecc.hwctl will re-initializeGPMC before every read/write call. omap_hwecc_init_bch() -> omap_enable_ecc_bch() (2) merges the GPMC configuration code for all ECC schemes into single omap_enable_hwecc(), thus adding scalability for future ECC schemes. omap_enable_hwecc() + omap_enable_ecc_bch() -> omap_enable_hwecc() Signed-off-by: Pekon Gupta <pekon@ti.com>
* | sandbox: Convert GPIOs to use driver modelSimon Glass2014-03-04-78/+139
| | | | | | | | | | | | Convert sandbox over to use driver model GPIOs. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: Add GPIO support and testsSimon Glass2014-03-04-0/+268
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver model support for GPIOs. Since existing GPIO drivers do not use driver model, this feature must be enabled by CONFIG_DM_GPIO. After all GPO drivers are converted over we can perhaps remove this config. Tests are provided for the sandbox implementation, and are a sufficient sanity check for basic operation. The GPIO uclass understands the concept of named banks of GPIOs, with each GPIO device providing a single bank. Within each bank the GPIOs are numbered using an offset from 0 to n-1. For example a bank named 'b' with 20 offsets will provide GPIOs named b0 to b19. Anonymous GPIO banks are also supported, and are just numbered without any prefix. Each time a GPIO driver is added to the uclass, the GPIOs are renumbered accordinging, so there is always a global GPIO numbering order. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* | dm: Add a demonstration/example driverSimon Glass2014-03-04-0/+288
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As an example of how to write a uclass and a driver, provide a demo version of each, accessible through the 'demo' command. To use these with driver model, define CONFIG_CMD_DEMO and CONFIG_DM_DEMO. The two demo drivers are enabled with CONFIG_DM_DEMO_SIMPLE and CONFIG_DM_DEMO_SHAPE. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* | dm: Add base driver model supportSimon Glass2014-03-04-0/+934
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver model functionality for generic board. This includes data structures and base code for registering devices and uclasses (groups of devices with the same purpose, e.g. all I2C ports will be in the same uclass). The feature is enabled with CONFIG_DM. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* | sizes.h - consolidate for all architecturesAlexey Brodkin2014-03-04-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copied from Linux sources "include/linux/sizes.h" commit 413541dd66d51f791a0b169d9b9014e4f56be13c Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Stefan Roese <sr@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Tom Rini <trini@ti.com> Acked-by: Stefan Roese <sr@denx.de> [trini: Add bcm Kona platforms to the patch] Signed-off-by: Tom Rini <trini@ti.com>
* | serial: zynq: Add OF initialization supportMichal Simek2014-03-04-0/+28
| | | | | | | | | | | | | | Add console selection from DTB which is enough to have OF driven solution. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | mmc: zynq: Add OF initialization supportMichal Simek2014-03-04-0/+29
| | | | | | | | | | | | Enable initialize sdhci from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: gem: Add OF initialization supportMichal Simek2014-03-04-0/+42
| | | | | | | | | | | | Gem can be directly initialized from DTB. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: emaclite: Fix OF initializationMichal Simek2014-03-04-8/+9
|/ | | | | | | | - Add xilinx_emaclite_of_init to netdev.h - Remove global data pointer from the driver - Add better handling for error state. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-26-0/+1008
|\ | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/armv7/config.mk board/ti/am43xx/mux.c include/configs/am43xx_evm.h Signed-off-by: Tom Rini <trini@ti.com>
| * mmc: kona: Add Kona mmc driverDarwin Rambo2014-02-22-0/+135
| | | | | | | | | | | | | | | | Add support for the Kona SDHCI found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Tim Kryger <tkryger@linaro.org>
| * i2c: kona: Add Kona I2C driverDarwin Rambo2014-02-22-0/+731
| | | | | | | | | | | | | | | | Add support for the Kona I2C controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Tim Kryger <tkryger@linaro.org>
| * gpio: kona: Add Kona gpio driverDarwin Rambo2014-02-22-0/+142
| | | | | | | | | | | | | | | | | | Add support for the Kona GPIO controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tkryger@linaro.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-02-25-1/+2
|\ \ | | | | | | | | | | | | | | | | | | With this, fixup a trivial build error of get_effective_memsize needing to be updated in the new board/freescale/p1010rdb/spl.c Signed-off-by: Tom Rini <trini@ti.com>
| * | fsl/usb: Limit phy_type comparison to first four charactersNikhil Badola2014-02-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use first four characters for phy_type comparison. Strcmp() should not be used to check the phy_type string which maybe parsed by hwconfig_subarg(). Hwconfig_subarg() returns part of hwconfig string starting from phy_type value till the end of the string. Since phy_type could be either "utmi" or "ulpi", strncmp() should be used so that a comparison of "utmi;fsl_ddr:bank_intlv=auto" with "utmi" will succeed. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | ar8031/8033/phy:enable autonegotiation for ar8031/8033Zhao Qiang2014-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before while "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8031/8033 to enable autonegotiation. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | power: fix: Do not execute pmic command when not all necessary parameters ↵Łukasz Majewski2014-02-24-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | are passed Lack of this check resulted in a data abort when CPU tried to execute the following command (without further mandatory input): 'pmic MAX77686_PMIC'. Only the 'pmic list' command requires one passed parameter. Other require at least two valid parameters for correct operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* | | SMC91111: Fix compilation warningsBhupesh Sharma2014-02-21-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following warning messages coming out of 'drivers/net/smc91111.h' when compiled for 'vexpress_aemv8a': warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Currently this issue seems to surface when SMSC is compiled for 64-bit ARMv8 platforms, so the change is protected under CONFIG_ARM64, so that it doesn't break other existing platforms. In addition this patch tries to fix some checkpatch errors and warnings (others related to camel-casing and volatile usage will be addressed by a later patch). This fix has been tested on both ARMv8 foundation model v1 and v2. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
* | | driver/ddr: Add 256 byte interleaving supportYork Sun2014-02-21-2/+20
| | | | | | | | | | | | | | | | | | | | | Freescale LayerScape SoCs support controller interleaving on 256 byte size. This interleaving is mandoratory. Signed-off-by: York Sun <yorksun@freescale.com>
* | | Driver/ddr: Add support of different DDR base addressYork Sun2014-02-21-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | DDR base address has been the same from the view of core and DDR controllers. This has changed for Freescale ARM-based SoCs. Controllers setup DDR memory in a contiguous space and cores view it at separated locations. Signed-off-by: York Sun <yorksun@freescale.com>
* | | driver/ddr: Change Freescale ARM DDR driver to support both big and little ↵York Sun2014-02-21-59/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | endian Initially it was believed the DDR controller on Freescale ARM would have big endian. But some platform will have little endian. Signed-off-by: York Sun <yorksun@freescale.com>
* | | serial: arc: Convert to use default_serial_putsAxel Lin2014-02-21-7/+1
| | | | | | | | | | | | | | | | | | Use default_serial_puts() instead of duplicating the implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2014-02-21-8/+42
|\ \ \
| * | | spi: ti_qspi: Add delay before xfer for am43xxSourav Poddar2014-02-18-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this delay, write/read is failing. Looks like, the WIP always remain set and hence a timeout occurs leading to the error. Without this patch, device does not get probed also. Here is the log. U-Boot# U-Boot# U-Boot# U-Boot# sf probe 0 SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff Failed to initialize SPI flash at 0:0 U-Boot# sf probe 0 While with this patch, log is U-Boot# sf probe 0 SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB, mapped at 30000000 U-Boot# sf erase 0 0x80000 SF: 524288 bytes @ 0x0 Erased: OK U-Boot# mw 81000000 0xdededede 0x40000 U-Boot# sf write 81000000 0 0x40000 SF: 262144 bytes @ 0x0 Written: OK U-Boot# sf read 82000000 0 0x40000 SF: 262144 bytes @ 0x0 Read: OK U-Boot# md 0x82000000 Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * | | spi: ti_qspi: Add AM43xx specifics changesSourav Poddar2014-02-18-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add AM43xx specific changes. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * | | spi: spi-mxc: implement clk control for ECSPI to fix SPI_MODE_3Markus Niebel2014-02-18-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPI_MODE_3 requires clk high when inactive. The SCLK_CTL field of the config reg was not configured in case of CPOL. Fix configuration so that SPI_MODE_3 which uses CPOL configures the clk line to be high in inactive state. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * | | spi: xilinx: Move timeout calculation out of the loopMichal Simek2014-02-18-3/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | Timeout calculation should be out of the data loop. This patch increase spi bandwidth for 30%. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | serial/serial_arc: switch from {read|write}l to {read|write}b accessorsAlexey Brodkin2014-02-21-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is required for proper functionality on big-endian targets. Memory-mapped registres of ARC UART are not 32-bit words but 8-bit bytes so on little-endian target either acessor (_l or _b) works fine. On big-endian only _b accessors works as expected. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tom Rini <trini@ti.com>
* | | serial/serial_arc: add work-around of ISS bugAlexey Brodkin2014-02-21-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explanation is in in-lined comment. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tom Rini <trini@ti.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-02-20-66491/+639
|\ \ \ | | |/ | |/|
| * | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-20-11/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Makefile drivers/net/npe/Makefile These two conflicts arise from commit 0b2d3f20 ("ARM: NET: Remove the IXP NPE ethernet driver") and are resolved by deleting the drivers/net/npe/Makefile file and removing the CONFIG_IXP4XX_NPE line from Makefile.
| * \ \ Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-19-2/+613
| |\ \ \
| | * \ \ Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-02-11-1513/+1233
| | |\ \ \
| | * | | | NET: fec_mxc: fix MDIO clock prescaler calculationMarkus Niebel2014-02-11-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prescaler value for MDC is calculated wrong for MX6S. Implement the same logic as linux here which handles ENET_MAC different then original FEC. Tested on a custom board with i.MX6S and 100MBit PHY Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
| | * | | | pci: mx6: Implement reset callbackMarek Vasut2014-02-11-3/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a callback so that a board can implement it's own specific routine to toggle the port's #PERST line or #define a GPIO to do so. Signed-off-by: Marek Vasut <marex@denx.de>
| | * | | | ARM: mx6: Add PCI express driverMarek Vasut2014-01-26-0/+566
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add PCIe driver for the Freescale i.MX6 SoC . This driver operates the PCIe block in RC mode only, the EP mode is NOT supported. The driver is tested with the Intel e1000 NIC driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * | | | | serial_zynq: Migrate to Zynq clock frameworkSoren Brinkmann2014-02-19-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove hard coded frequencies and use Zynq's clock framework to obtain the UART clock frequency. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | net: zynq_gem: Calculate clock dividers dynamicallySoren Brinkmann2014-02-19-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove hard coded clock divider setting and use the Zynq clock framework to dynamically calculate appropriate dividers at run time. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | net: zynq_gem: Move RCLK details out of driverSoren Brinkmann2014-02-19-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GEM driver should not need to know about Zynq specific details of RCLK related registers and bitfields in the SLCR. Move those details to the slcr driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | zynq: serial: Simplify serial driver initializationMichal Simek2014-02-19-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define both serial uarts in the driver and return default uart based on board configuration. - Move baseaddresses to hardware.h - Define default baudrate and clock values Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | | Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2014-02-19-66464/+0
| |\ \ \ \ \
| | * | | | | ARM: serial: Remove the IXP UART driverMarek Vasut2014-02-06-133/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-12-24 07:04:30 +0000