summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* net 52xx: fix ethernet device names with spacesWolfgang Denk2010-08-05-1/+1
| | | | | | | | | Some commands (like 'mii') use this name to select devices, but they break when those names contain spaces. So drop the space from Ethernet driver names (cf. commit 1384f3bb). Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Ben Warren <biggerbadderben@gmail.com>
* Rename getenv_r() into getenv_f()Wolfgang Denk2010-08-04-1/+1
| | | | | | | | | | | | | | | | | | | While running from flash, i. e. before relocation, we have only a limited C runtime environment without writable data segment. In this phase, some configurations (for example with environment in EEPROM) must not use the normal getenv(), but a special function. This function had been called getenv_r(), with the idea that the "_r" suffix would mean the same as in the _r_eentrant versions of some of the C library functions (for example getdate vs. getdate_r, getgrent vs. getgrent_r, etc.). Unfortunately this was a misleading name, as in U-Boot the "_r" generally means "running from RAM", i. e. _after_ relocation. To avoid confusion, rename into getenv_f() [as "running from flash"] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* cmd_usage(): simplify return code handlingWolfgang Denk2010-07-24-28/+17
| | | | | | | | | | | | | | | | Lots of code use this construct: cmd_usage(cmdtp); return 1; Change cmd_usage() let it return 1 - then we can replace all these ocurrances by return cmd_usage(cmdtp); This fixes a few places with incorrect return code handling, too. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2010-07-24-0/+52
|\
| * i2c: soft_i2c: add simple GPIO implementationMike Frysinger2010-07-22-0/+52
| | | | | | | | | | | | | | | | | | | | | | Since the vast majority of GPIO I2C implementations behave the same way, support the common GPIO framework with default settings. This adds two new defines CONFIG_SOFT_I2C_GPIO_{SCL,SDA} so that boards which want GPIO I2C support need only define these. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Thomas Chou <thomas@wytron.com.tw>
* | powerpc/p3041: Add various p3041 related definesKumar Gala2010-07-20-1/+2
| | | | | | | | | | | | | | | | | | | | | | There are various locations that we have chip specific info: * Makefile for which ddr code to build * Added p3041 to cpu_type_list and SVR list * Added number of LAWs for p3041 * Set CONFIG_MAX_CPUS to 4 for p3041 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/p5020: Add various p5020 related defines (and p5010)Kumar Gala2010-07-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | There are various locations that we have chip specific info: * Makefile for which ddr code to build * Added p5020 & p5010 to cpu_type_list and SVR list * Added number of LAWs for p5020 * Set CONFIG_MAX_CPUS to 2 for p5020 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliasesKumar Gala2010-07-20-4/+11
|/ | | | | | | | | | | Previously we used an alias the pci node to determine which node to fixup or delete. Now we use the new fdt_node_offset_by_compat_reg to find the node to update. Additionally, we replace the code in each board with a single macro call that makes assumes uniform naming and reduces duplication in this area. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* video: cleanup comments in cfb_console.c and video_fb.hAnatolij Gustschin2010-07-17-3/+3
| | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-07-16-88/+61
|\
| * fsl_law.c: Add print_laws() for FSL_CORENET platforms.Becky Bruce2010-07-16-0/+6
| | | | | | | | | | | | | | Add printing of LAWBARH/LAWBARL for FSL_CORENET platforms. Signed-off-by: Becky Bruce <Beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * drivers/misc/fsl_law.c: Rearrange code to avoid duplicationBecky Bruce2010-07-16-77/+48
| | | | | | | | | | | | | | | | The current code redefines functions based on FSL_CORENET_ vs not - create macros/inlines instead that hide the differences. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * 83xx/85xx/86xx: LBC register cleanupBecky Bruce2010-07-16-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, 83xx, 86xx, and 85xx have a lot of duplicated code dedicated to defining and manipulating the LBC registers. Merge this into a single spot. To do this, we have to decide on a common name for the data structure that holds the lbc registers - it will now be known as fsl_lbc_t, and we adopt a common name for the immap layouts that include the lbc - this was previously known as either im_lbc or lbus; use the former. In addition, create accessors for the BR/OR regs that use in/out_be32 and use those instead of the mismash of access methods currently in play. I have done a successful ppc build all and tested a board or two from each processor family. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'master' of ../masterWolfgang Denk2010-07-15-1087/+1908
|\ \ | |/
| * Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk2010-07-14-8/+4
| |\
| | * gpio_led: add gpio_request to __led_initThomas Chou2010-07-12-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the gpio usage request. The polarity is changed to positive as suggested by Mike Frysinger. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2010-07-14-825/+1740
| |\ \
| | * | mvgbe: add support for orion5x GbE controllerAlbert Aribaud2010-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add definitions and initialization in orion5x for mvgbe. Add orion5x in mvgbe SoC includes. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | mvgbe: support SoCs other than kirkwoodAlbert Aribaud2010-07-12-401/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename all references to kirkwood in mvgbe symbols throughout the whole codebase. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | net: rename: kirkwood_egiga as mvgbeAlbert Aribaud2010-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename kirkwood_egiga.* to mvgbe.* and adjust makefile and #include accordingly. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | kirkwood_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATIONAlbert Aribaud2010-07-12-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This configuration option allows SoCs without random generation capability to fill in local MACs with a fixed rather than random value Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | cpuat91: unbreak ethernetEric Bénard2010-07-12-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * the following problems are met : config was set to use the new driver as a default but - RMII was not enabled for the new driver - the new driver didn't compile with RMII enabled - the new driver initialize a PHY at address O when the PHY of this board is at 1 thus we get "AT91 EMAC RMII: No PHY present" * to fix these problems, this patch : - enable RMII for the new driver - fix the wrong define used in the at91_emac.c - allow the config file to set a default phy address (and use 0 as a default as in the actual at91_emac.c driver) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | at91_emac: Write MAC address automaticallyEric Bénard2010-07-12-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | tested on cpuat91. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: use standard I/O accessorsMike Frysinger2010-07-12-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current dm9000x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on Blackfin systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: make OUTW handle 32bit/16bit defines tooHoan Hoang2010-07-12-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current OUTW function is always defined as a 16bit function, but this doesn't work correctly when using the 32bit access mode. So define it as a 32bit function when in 32bit mode so things work correctly on Blackfin 32bit LE systems. Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: add support for the Marvell 88E1118 phyHoan Hoang2010-07-12-12/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some places in the current code equate the Marvell 88E1111 PHY as the family when in reality it's a subpart of the Alaska family. So once we generalize that, add support for the 88E1118 PHY. Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | Write MAC address automatically on MACB-based boardsBen Warren2010-07-12-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | Also, remove all calls to eth_init() in boards that use MACB Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | tsec: fix the return value for tsec_eth_init()Timur Tabi2010-07-12-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ethernet initialization functions are supposed to return the number of devices initialized, so fix tsec_eth_init() so that they returns the number of TSECs initialized, instead of just zero. This is safe because the return value is currently ignored by all callers, but now they don't have to ignore it. In general, if an function initializes only one device, then it should return a negative number if there's an error. If it initializes more than one device, then it should never return a negative number. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | uli526x: drop newlines from device nameMike Frysinger2010-07-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Device names should not contain non-printable characters like newlines. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: switch to common mii.h headerMike Frysinger2010-07-12-61/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No compiled code change here, just drop the local PHY defines in favor of the common standard ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: improve phy searchingMike Frysinger2010-07-12-39/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than hardcode specific phy addresses, search the possible phy address space to find the first available phy. Also respect the normal CONFIG_PHY_ADDR option for board porters to pick a specific address. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | AX88180: fix media typosHoan Hoang2010-07-12-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | kirkwood_egiga: updates: fix DRAM mapping and typoAlbert Aribaud2010-07-12-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DRAM window mapping uses kirkwood-provided functions instead of global gd as do other drivers--fix this. Also, fix a typo in a comment Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | SPEAr : Network driver support addedVipin KUMAR2010-07-12-0/+796
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Designware network driver support added. This is a Synopsys ethernet controller Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | kirkwood_egiga: bugfix: add DMA sequence pointsAlbert Aribaud2010-07-12-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Insert isb() sequence points to ensure DMA descriptors are filled in and set up before actual DMA occurs. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | net: Add option to disable fiber on M88E1111 PHY for PPC4xxStefan Roese2010-07-12-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By defining CONFIG_M88E1111_DISABLE_FIBER boards can configure the M88E1111 PYH to disable fiber. This is needed for an upcoming PPC460GT based board, which has fiber/copper auto-selection enabled by default. This doesn't seem to work. So we disable fiber in the PHY register. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | net: dm9000x: re-add casts to I/O pointers to fix gcc warningsMike Frysinger2010-07-12-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DM9000 in/out helper functions were casting the register address when it was accessing things directly (pre commit a45dde2293c816138e53c). But when it was changed to using the in/out helpers, those casts were dropped because those functions don't take pointers. Even more recently, those functions were then changed to use the read/write helpers, but the casts were not re-added. This is necessary because the read/write helpers do take pointers. Otherwise we get a lot of warnings like: dm9000x.c: In function 'dm9000_inblk_8bit': dm9000x.c:172: warning: passing argument 1 of 'readb' makes pointer from integer without a cast Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Thomas Weber <weber@corscience.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| | * | tsec: add micrel ksz804 phyHeiko Schocher2010-07-12-0/+22
| | |/ | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-07-14-253/+147
| |\ \
| | * | Blackfin: bfin_mac: remove space from nameMike Frysinger2010-07-13-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some commands (like 'mii') use this name to select devices, but they break when those names contain spaces. So drop the space from the Blackfin EMAC driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: bfin_spi: support gpios as chip selectsMike Frysinger2010-07-13-28/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than only support the pins dedicated as chip selects, utilize the gpio framework to support any gpio pin. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: bfin_spi: convert to portmux frameworkMike Frysinger2010-07-13-159/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: pata_bfin: convert to portmux frameworkMike Frysinger2010-07-13-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: bfin_sdh: convert to portmux frameworkMike Frysinger2010-07-13-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: bfin_nand: convert to portmux frameworkMike Frysinger2010-07-13-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than bang MMRs directly, use the new portmux framework to handle the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Scott Wood <scottwood@freescale.com>
| | * | Blackfin: bfin_mac: convert to portmux frameworkMike Frysinger2010-07-13-36/+11
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than bang MMRs directly, use the new portmux framework to handle the details. While we're doing this, let boards declare the exact list of pins they need in case there is one or two they don't actually have hooked up. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ben Warren <biggerbadderben@gmail.com>
| * | mtd: nand_plat: add simple GPIO framework DEV_READY optionMike Frysinger2010-07-08-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | Make it easy to use GPIOs for the DEV_READY pin by using the common GPIO framework. Also make the NAND_PLAT_INIT() define optional. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Thomas Chou <thomas@wytron.com.tw>
| * | NAND: add Toshiba TC58NVG0 identifierFlorian Fainelli2010-07-08-0/+1
| | | | | | | | | | | | | | | | | | | | | The Toshiba TC58NVG0* parts are 128Mbytes x 8 bits 3.3V parts with the 0xD1 identifier. Add these to the list of known devices IDs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | NAND: show manufacturer and device ID for unknown chipsFlorian Fainelli2010-07-08-1/+5
| |/ | | | | | | | | | | | | | | When the NAND part is not supported, it is useful to show the manufacturer and device ID to help debugging and reporting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Davinci: SPI: add the missing v2 patch changesNick Thompson2010-07-05-2/+6
| | | | | | | | | | | | | | | | | | | | Two Indentation fixes. Catch requests for full-duplex transfers when driver configured for half-duplex operation only. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
generated by cgit v1.1 at 2024-12-12 19:28:53 +0000