summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* ENGR00124951 Uboot cannot initialize MMC cardsAnish Trivedi2010-07-07-2/+0
| | | | | | | | Removed low voltage (1.8V) from supported voltage ranges. Changed SD2_CMD pad setting to enable SD2 r/w in uboot. Loaded env from booted device instead of SD1 always. Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00124908 CSPI: make spi_get_cfg platform specificJason Liu2010-07-07-51/+6
| | | | | | | CSPI: make spi_get_cfg platform specific move the spi_get_cfg out of the cspi/ecspi driver Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00123782 Fix boot partition problem for emmcAnish Trivedi2010-06-24-52/+66
| | | | | | Enable boot partition in BOOT_CONFIG byte of EXT_CSD Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00122651: Add dwc_ahsata supportTerry Lv2010-06-24-17/+1473
| | | | | | Add dwc_ahsata support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00123484 mx28:support saving environment into sd1Aisheng.Dong2010-06-08-78/+93
| | | | | | | | | Original uboot did not support sd1 and can only save environment into sd0 even actually you're booting from sd1. This patch adds the capability of saving environment into sd1 when you're booting from sd1. Signed-off-by: Aisheng.Dong <b29396@freescale.com>
* ENGR00123551: Add mx25 splash screen supportTerry Lv2010-05-31-0/+126
| | | | | | | | Add mx25 splash screen support. Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Renato Frias <renato.frias@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00123265 UBOOT:Preserve NAND bad block indicationJason Liu2010-05-07-1/+29
| | | | | | Preserve NAND bad block indication Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00119033: System can not find MMC/SD card in SD slot 1Terry Lv2010-03-30-31/+56
| | | | | | | System can not find MMC/SD card in SD slot 1 when booting from Uboot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122050: mmc can't read data whose size exceeds 32MTerry Lv2010-03-26-78/+80
| | | | | | mmc can't read data whose size exceeds 32M. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121976 UBOOT: some fix for SD/MMC cardJason2010-03-25-9/+7
| | | | | | | | | -Update eSDHC clock setting, -Fix the GPT timer setting, -Fix the boot option pars, -Remove mdelay() function call to improve the performance Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00121832: Some code reconstructure for u-bootTerry Lv2010-03-22-23/+7
| | | | | | | | 1. Remove board specific code in mxc_i2c.c. 2. Remove board specific code in mxc_fec.c. 3. Move imx_spi_nor.h to include/asm-arm. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121202 Add uboot support for MX53Jason2010-03-17-2/+7
| | | | | | Add uboot support for MX53 Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR000121601: FEC not work in mx28 u-bootTerry Lv2010-03-16-1/+10
| | | | | | FEC not work in mx28 u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121379: MX28 U-BOOT enhancementsTerry Lv2010-03-12-745/+30
| | | | | | MX28 U-BOOT enhancements. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00120520: Enable MMU for mx51 and mx35Terry Lv2010-03-04-19/+110
| | | | | | | MMU enable code is missed in mx51 and mx35 u-boot. So add these codes. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00120830: Add eMMC and eSD fast boot supportTerry Lv2010-02-08-1/+150
| | | | | | | Add eMMC and eSD fast boot support. Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Brian Liu <b14843@freescale.com>
* ENGR00120476: Add fuse support for mx51Terry Lv2010-01-27-0/+4
| | | | | | Add fuse support for mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00120206 iMX28 Enable Ethernet and MMC boot supportrel_imx_2.6.31_10.02.00Frank Li2010-01-25-0/+1115
| | | | | | Enable Ethernet and MMC boot support for imx28-evk Signed-off-by: Frank Li <frank.li@freescale.com>
* ENGR00119894: Read right value in mxc_i2cTerry Lv2010-01-11-2/+2
| | | | | | | The value read from mxc_i2c is not complete. The last byte is lost. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119890: Set right mac addr to FEC register in initTerry Lv2010-01-11-8/+11
| | | | | | | The mac addr set to FEC is smc911x's. So add a environment "fec_addr" to set fec address. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119706: Add esdhcv1 support.Terry Lv2009-12-31-9/+9
| | | | | | Add a new config CONFIG_IMX_ESDHC_V1 for v1 support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119526 MX25: Fix mmc read/write failure on mmc ubootrel_imx_2.6.31_09.12.00Sammy He2009-12-21-0/+11
| | | | | | Fix MMC read/write failure due to eSDHC register definition wrong Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00119486 MX25: Improve Lan9217 ethernet transfer speedSammy He2009-12-18-3/+1
| | | | | | Speed is too slow on MX25, remove udelay in cspi driver Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00119246 Add CONFIG_MXC_NAND config flag in MX25 platformJason2009-12-11-1/+0
| | | | | | Add CONFIG_MXC_NAND config flag in MX25 platform Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118998: Can not get ip address when kernel boot upTerry Lv2009-12-11-0/+12
| | | | | | Kernel need uboot to set fec mac address. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118789 Uboot:Update NAND scan scheme to support new nand typeJason2009-12-08-4/+2493
| | | | | | | | Update NAND scan scheme to support new nand type. With this patch uboot can support new NAND flash on mx25/mx35 board while compatible with old NAND on old boards. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118978: Timer adjustment for all platformsFred Fan2009-12-04-4/+4
| | | | | | | | | In current u-boot design, get_timer_masked is not correct and udelay is not accurate when the time is less than 1000us. Thus we need to use ipg clock source for accurate timer. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118751: Some mmc card can't read and write from right offset.Terry Lv2009-11-27-13/+46
| | | | | | | | Some mmc card can't read and write from right offset. Driver see these card as high capacity and use sector mode for them. This will lead to read and write corrupt. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118816 Fix reboot/reset failure with image on nandSammy He2009-11-26-0/+28
| | | | | | Reset CPLD registers to fix reboot/reset failure issue. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118647 Fix smc911x receive packet length not set correctlySammy He2009-11-20-1/+1
| | | | | | | Fix smc911x receive packet length not set correctly issue. This caused MX25 tftp timeout sometimes. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118576 MX25: Support Smc911x ethernetSammy He2009-11-20-6/+387
| | | | | | | 1. Add imx cspi support for cpld access. 2. Add smc911x ethernet support from cpld. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118428 MX233 Uboot: reslove the build error for branch imx_v2009.08Lionel Xu2009-11-13-4/+7
| | | | | | | bd->bi_enetaddr was removed in one of the previous patchs, some changes must be done to avoid building error. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00118362: Correct recovery NAND cmdTerry Lv2009-11-12-4/+4
| | | | | | | | | This patch will fix three issues: 1. Add boot device detection. 2. Use right nand command in anroid for recovery mode. 3. Recovery mode code clean. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118294: Misc changes for v2009.08 upgrade.Terry Lv2009-11-11-6/+25
| | | | | | Misc changes for v2009.08 upgrade. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00117616: PATA support in u-boot.Terry Lv2009-11-04-0/+545
| | | | | | PATA support in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116924 Uboot: Boot up hang at detecting NAND when cold bootJason2009-11-04-14/+45
| | | | | | | | | | Boot from MMC card failed at detecting NAND. The fix will 1. Set RBB_MODE to 1 and using atomic status command 2. Set FW correctly by adding CONFIG_NAND_FW_8 config 3. Correct the BLS register value Signed-off-by:Jason Liu <r64343@freescale.com> (cherry picked from commit 7142651386271c340a6ae061a6e2893695675724)
* u-boot v2009.08 sd/mmc support.Terry Lv2009-11-03-2042/+510
| | | | Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116472-1 U-BOOT upgrade to V2009.08Fred Fan2009-09-14-592/+60
| | | | | | | | | | U-BOOT upgrade from V2009.01 to V2009.08 Initial version for i.MX51 BBG board. Support: FEC, SPI, spi Nor Flash Boot from spi nor flash and mmc/sd Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00116243: I2C support for mx51 3ds board.Terry Lv2009-09-10-0/+2
| | | | | | I2C support for mx51 3ds board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116203: Change nand Makefile to use CONFIG_MXC_NAND.Terry Lv2009-09-10-2/+1
| | | | | | Change nand Makefile to use CONFIG_MXC_NAND. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-1/+600
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115333: Enable cp command for MMCTerry Lv2009-09-10-101/+103
| | | | | | Enable cp command for MMC. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-1/+1191
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00114393: Support Atmel AT45DB321D SPI NOR flash.Terry Lv2009-09-10-1/+534
| | | | | | Support Atmel AT45DB321D SPI NOR flash. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114201: Add MMC configs to mx35 3stack config file.Terry Lv2009-09-10-81/+42
| | | | | | Add MMC configs to mx35 3stack config file. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114236 Disable NAND driver interleave mode supportJason2009-09-10-23/+13
| | | | | | Disable NAND driver interleave mode support Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00114233 Add support for programming ubifs image on nand flashJason2009-09-10-0/+67
| | | | | | Add support for programming ubifs image on nand flash Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00113611: Add FEC support for BBG2.Terry Lv2009-09-10-11/+18
| | | | | | Add FEC support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113439: BBG2, enable SPI NOR and MMC in one image.Terry Lv2009-09-10-5/+11
| | | | | | BBG2, enable SPI NOR and MMC in one image. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113148 Add build option to uboot for different media typeJason2009-09-10-1/+1
| | | | | | | 1. Add build option to uboot for different media type 2. fix the spi-nor link error Signed-off-by:Jason Liu <r64343@freescale.com>
generated by cgit v1.1 at 2024-12-18 21:46:50 +0000