summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* dwmmc: Increase retry timeoutAlexander Graf2016-03-15-1/+1
| | | | | | | | | | | | | | When enable dcache on HiKey, we're running into MMC command timeouts because our retry loop is now faster than the eMMC (or an external SD card) can answer. Increase the retry count to the same as the timeout value for status reports. The real fix is obviously to not base this whole thing on a cycle counter but on real wall time, but that would be slightly more intrusive. Signed-off-by: Alexander Graf <agraf@suse.de>
* input: TWL6030 input support for power button, USB and chargerPaul Kocialkowski2016-03-15-0/+49
| | | | | | | This adds support for detecting a few inputs exported by the TWL6030. Currently-supported inputs are the power button, USB and charger presence. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Power off supportPaul Kocialkowski2016-03-15-0/+8
| | | | | | This adds support for powering off (the omap SoC) from the twl6030. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Remove ifdef around the codePaul Kocialkowski2016-03-15-2/+0
| | | | | | | The TWL6030 power driver is only built when CONFIG_TWL6030_POWER is selected, thus there is no reason to wrap the code with ifdef. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: musb-new: omap2430: OMAP4 MUSB USB controller supportPaul Kocialkowski2016-03-15-0/+25
| | | | | | | This adds support for the OMAP4 MUSB USB controller, with a matching Linux compat definition, TWL6030 USB device setup and USBOTGHS register setup. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Clear VUSB_IN_PMID bit on USB device setupPaul Kocialkowski2016-03-15-0/+1
| | | | | | | | | | | | When booting from USB, the bootrom sets the VUSB_IN_PMID bit of the MISC2 register of the TWL6030. However, U-Boot sets the VUSB_IN_VSYS bit to enable VBUS input. As both bits are contradictory, enabling both disables the input, according to the TWL6030 TRM. Thus, we need to clear the VUSB_IN_PMID bit in case of an USB boot (which could just as well be a memory boot after USB timed out). Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Configure VUSB voltage on USB device setupPaul Kocialkowski2016-03-15-0/+4
| | | | | | This explicitly sets VUSB voltage to 3.3V when enabling USB. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap_hsmmc: Board-specific TWL6030 MMC power initializationPaul Kocialkowski2016-03-15-4/+2
| | | | | | | | | | Boards using the TWL6030 regulator may not all use the LDOs the same way. Some might also not use MMC1 at all, so VMMC would't have to be enabled. This delegates TWL6030 MMC power initializations to board-specific functions, that may still call twl6030_power_mmc_init for the default behavior. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Device-index-specific MMC power initializationPaul Kocialkowski2016-03-15-26/+28
| | | | | | | | Not every device has multiple MMC slots available, so it makes sense to enable only the required LDOs for the available slots. Generic code in omap_hsmmc will enable both VMMC and VAUX1, in doubt. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 valuePaul Kocialkowski2016-03-15-0/+19
| | | | | | | | | | | This enables the VAUX1 supply, used for eMMC power in standard configurations. Its voltage is determined by the value of the BOOT2 pin of the TWL6030. Note that the TWL6030 might already have enabled this regulator at startup (depending on the value of the BOOT3 pin of the TWL6030), according to the TWL6030 datasheet. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* power: twl6030: Some more explicit registers and values definitionsPaul Kocialkowski2016-03-15-11/+15
| | | | | | | This makes the twl6030 mmc and usb-related power registers and values definitions more explicit and clear and adds prefixes to them. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* spi: omap3: Fix multiple definition of 'priv'Jagan Teki2016-03-15-19/+21
| | | | | | | | | | | | | Global definition of priv seems no-sense to use it for non-dm case and pass the pointer to functions which are common to both dm and non-dm. So, fix this by removing omap3_spi_slave from non-dm and make visible to omap3_spi_priv for both dm and non-dm. Cc: Christophe Ricard <christophe-h.ricard@st.com> Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-03-15-22/+326
|\
| * video: ipu: avoid overflow issuePeng Fan2016-03-14-19/+54
| | | | | | | | | | | | | | | | | | | | | | Multiplication, as "clk->parent->rate * 16" may overflow. So use do_div to avoid such issue. Signed-off-by: Peng Fan <van.freenix@gmail.com> Signed-off-by: Sandor Yu <sandor.yu@nxp.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
| * rockchip: video: Add LVDS support in vop driverJacob Chen2016-03-14-2/+14
| | | | | | | | | | | | | | | | | | | | LVDS have a different display out mode, add code to get right flag. The vop_ip decide display device and the remote_vop_id decide which vop was being used. So we should use the remote_vop_id to set DCLK_VOP. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Acked-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Add a display driver for rockchip LVDSJacob Chen2016-03-14-1/+255
| | | | | | | | | | | | | | | | Some Rockchip SoCs support LVDS output. Add a display driver for this so that these displays can be used on supported boards. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: video: Add a operation to display uclassJacob Chen2016-03-14-0/+3
| | | | | | | | | | | | | | | | | | The current display class only allow to get timing from edid. So add a operation to get timing directly from driver. In driver, I will use fdtdec_decode_display_timing to get timing. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-03-15-376/+497
|\ \
| * | spi: omap3: Convert to driver modelJagan Teki2016-03-14-270/+416
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After this conversion the driver will able to support both dm and non-dm and code is more extensible like we can remove the non-dm part simply without touching anycode if all the boards which are using this driver become dm driven. Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Tested-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Jagan Teki <jteki@openedev.com> [Set priv->wordlen, Add Kconfig entry and file credit for dm conversion] Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
| * | spi: omap3: Make local functions as staticJagan Teki2016-03-14-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Attach static on local defined functions. Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
| * | spi: omap3: Move headers code inside the driverJagan Teki2016-03-14-111/+86
| |/ | | | | | | | | | | | | | | | | | | | | | | Header file have macro's and register definition and some unneeded function proto types which becomes tunned further in future patches and entire driver code resides in one file for more readability. Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> [Fixes on code styles, Remove omap3_spi_txrx|write|read in header] Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* | Merge git://git.denx.de/u-boot-dmTom Rini2016-03-14-145/+427
|\ \
| * | dm: serial: Remove duplicated carriage return characterAlison Wang2016-03-14-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | As the handling for carriage return and line feed is done in the common DM driver serial-uclass.c, such handling in some serial DM drivers is duplicated and need to be removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | serial: Move carriage return before line feed for some serial driversAlison Wang2016-03-14-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | In general, a carriage return needs to execute before a line feed. The patch is to change some serial drivers based on this rule, such as serial_mxc.c, serial_pxa.c, serial_s3c24x0.c and usbtty.c. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | dm: serial-uclass: Move a carriage return before a line feedAlison Wang2016-03-14-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | In general, a carriage return needs to execute before a line feed. The patch is to change serial DM driver serial-uclass.c based on this rule. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | dm: sandbox: Add driver-model block-device support for sandboxSimon Glass2016-03-14-1/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update the host driver to support driver model for block devices. A future commit will remove the old code, but for now it is useful to be able to use it both with and without CONFIG_BLK. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: sandbox: Prepare block driver for driver-model conversionSimon Glass2016-03-14-16/+14
| | | | | | | | | | | | | | | | | | | | | Make a few minor changes to make it easier to add driver-model support. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: blk: Add a block-device uclassSimon Glass2016-03-14-0/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a uclass for block devices. These provide block-oriented data access, supporting reading, writing and erasing of whole blocks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: block: Rename device number member dev to devnumSimon Glass2016-03-14-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a device number, and we want to use 'dev' to mean a driver model device. Rename the member. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: part: Rename some partition functionsSimon Glass2016-03-14-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Rename three partition functions so that they start with part_. This makes it clear what they relate to. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: pci: Break out the common region display codeSimon Glass2016-03-14-34/+17
| | | | | | | | | | | | | | | | | | | | | | | | Each region is displayed in almost the same way. Break out this common code into its own function. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: Drop the block_dev_desc_t typedefSimon Glass2016-03-14-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long and causes 80-column violations, rename it to struct blk_desc. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
| * | dm: core: make simple-bus compatible to simple-mfdMasahiro Yamada2016-03-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Simple MFD devices can bind children without special bus configuration. Like Linux, let's handle "simple-mfd" in the same way as "simple-bus". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | dm: Use uclass_first_device_err() where it is usefulSimon Glass2016-03-14-17/+7
| | | | | | | | | | | | | | | | | | Use this new function in places where it simplifies the code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: core: Add uclass_first_device_err() to return a valid deviceSimon Glass2016-03-14-0/+13
| |/ | | | | | | | | | | | | | | A common pattern is to call uclass_first_device() and then check if it actually returns a device. Add a new function which does this, returning an error if there are no devices in that uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: omap_timer: Fix conversion of address to a pointerLokesh Vutla2016-03-14-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | OMAP timer driver directly typecasts fdt_addr_t to a pointer. This is not strictly correct, as it gives a build warning when fdt_addr_t is u64. So, use map_physmem for a proper typecasts. This is inspired by commit 167efe01bc5a9 ("dm: ns16550: Use an address instead of a pointer for the uart base") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start valueStefan Roese2016-03-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The original name of this function is unclear. This patch renames this CRC16 function to crc16_ccitt() matching its name with its implementation. To make the usage of this function more flexible, lets add the CRC start value as parameter to this function. This way it can be used by other functions requiring different start values than 0 as well. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | remoteproc: Add support for TI power processorNishanth Menon2016-03-14-0/+191
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many TI System on Chip (SoC) solutions do have a dedicated microcontroller for doing power management functionality. These include the AM335x, AM437x, Keystone K2G SoCs. The functionality provided by these microcontrollers and the communication mechanisms vary very widely. However, we are able to consolidate some basic functionality to be generic enough starting with K2G SoC family. Introduce a basic remote proc driver to support these microcontrollers. In fact, on SoCs starting with K2G, basic power management functions are primarily accessible for the High Level Operating Systems(HLOS) via these microcontroller solutions. Hence, having these started at a bootloader level is pretty much mandatory. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass2016-03-14-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
* sf: Correct data types in stm_is_locked_sr()Marek Vasut2016-03-12-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The stm_is_locked_sr() function is picked from Linux kernel. For reason unknown, the 64bit data types used by the function and present in Linux were replaced with 32bit unsigned ones, which causes trouble. The testcase performed was done using ST M25P80 chip. The command used was: => sf protect unlock 0 0x10000 The call chain starts in stm_unlock(), which calls stm_is_locked_sr() with negative ofs argument. This works fine in Linux, where the "ofs" is loff_t, which is signed long long, while this fails in U-Boot, where "ofs" is u32 (unsigned int). Because of this signedness problem, the expression past the return statement to be incorrectly evaluated to 1, which in turn propagates back to stm_unlock() and results in -EINVAL. The correction is very simple, just use the correctly sized data types with correct signedness in the function to make it work as intended. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* dm: ti_qspi: Fix conversion of address to a pointerLokesh Vutla2016-03-12-3/+7
| | | | | | | | | | | | | | TI QSPI driver directly typecasts fdt_addr_t to a pointer. This is not strictly correct, as it gives a build warning when fdt_addr_t is u64. So, use map_physmem for a proper typecasts. This is inspired by commit 167efe01bc5a9 ("dm: ns16550: Use an address instead of a pointer for the uart base") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
* pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIERMasahiro Yamada2016-03-09-9/+9
| | | | | | | | | | CONFIG_PINCTRL_UNIPHIER is more suitable than CONFIG_ARCH_UNIPHIER to guard the drivers/pinctrl/uniphier directory. The current CONFIG_PINCTRL_UNIPHIER_CORE is a bit long, so rename it into CONFIG_PINCTRL_UNIPHIER. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* pinctrl: uniphier: set input-enable before pin-muxingMasahiro Yamada2016-03-09-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | While IECTRL is disabled, input signals are pulled-down internally. If pin-muxing is set up first, glitch signals (Low to High transition) might be input to hardware blocks. Bad case scenario: [1] The hardware block is already running before pinctrl is handled. (the reset is de-asserted by default or by a firmware, for example) [2] The pin-muxing is set up. The input signals to hardware block are pulled-down by the chip-internal biasing. [3] The pins are input-enabled. The signals from the board reach the hardware block. Actually, one invalid character is input to the UART blocks for such SoCs as PH1-LD4, PH1-sLD8, where UART devices start to run at the power on reset. To avoid such problems, pins should be input-enabled before muxing. [ ported from Linux commit bac7f4c1bf5e7c6ccd5bb71edc015b26c77f7460 ] Fixes: 5dc626f83619 ("pinctrl: uniphier: add UniPhier pinctrl core support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-03-04-2/+12
|\
| * usb: dwc2: disable erroneous overcurrent conditionDinh Nguyen2016-03-05-1/+5
| | | | | | | | | | | | | | | | | | | | | | For the case where an external VBUS is used, we should enable the external VBUS comparator in the driver. This would prevent an unnecessary overcurrent error which would then disable the host port. The overcurrent condition was happening on the SoCFPGA Cyclone5 devkit, thus USB was not working on the devkit. This patch fixes that problem. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * usb: gadget: composite: Correct recovery path for registerSam Protsenko2016-03-01-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case when usb_composite_register() failed once (for whatever reason), it will fail further even if all conditions are correct. Example: => fastboot 2 Invalid Controller Index couldn't find an available UDC g_dnl_register: failed!, error: -19 exit not allowed from main input shell. => fastboot 0 g_dnl_register: failed!, error: -22 exit not allowed from main input shell. Despite that 0 is correct index for USB controller, "fastboot 0" command will fail, because "composite" structure wasn't cleared properly on previous fail (on "fastboot 2" command). This patch fixes that erroneous behavior, allowing us to use composite even after previous failure. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-02-29-0/+912
|\ \
| * | mmc: uniphier: add driver for UniPhier SD/MMC host controllerMasahiro Yamada2016-02-29-0/+758
| | | | | | | | | | | | | | | | | | | | | Add a driver for the on-chip SD/eMMC host controller used by UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | gpio: uniphier: add driver for UniPhier GPIO controllerMasahiro Yamada2016-02-29-0/+154
| |/ | | | | | | | | | | | | This GPIO controller device is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Revert "dm: ns16550: Add support for reg-offset property"Tom Rini2016-02-29-4/+2
|/ | | | | | | | | | | This reverts commit d9a3bec682f9756621615f4306718a356a3230e3. While this is a correct change to do long term it unfortunately breaks a number of platforms that are using pdata and not named struct members so they are getting all of their data after 'base' incorrect. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>