summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
...
* | video: Provide a backspace methodSimon Glass2016-01-30-1/+11
| | | | | | | | | | | | | | | | With proportional fonts the vidconsole uclass cannot itself erase the previous character. Provide an optional method so that the driver can handle this operation. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Provide a signal when a new console line is startedSimon Glass2016-01-30-0/+14
| | | | | | | | | | | | | | When we start a new line (due to the user pressing return), signal this to the driver so that it can flush its buffer of character positions. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Provide a left margin for the text consoleSimon Glass2016-01-30-3/+3
| | | | | | | | | | | | | | Allow the left margin to be set so that text does not have to be right up against the left side. On some panels this makes it hard to read. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Handle the 'bell' characterSimon Glass2016-01-30-0/+3
| | | | | | | | | | | | | | This can be sent when to many characters are entered. Make sure it is ignored and does not cause a character to be displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
* | video: Use fractional units for X coordinatesSimon Glass2016-01-30-42/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With anti-aliased fonts we need a more fine-grained horizontal position than a single pixel. Characters can be positioned to start part-way through a pixel, with anti-aliasing (greyscale edges) taking care of the visual effect. To cope with this, use fractional units (1/256 pixel) for horizontal positions in the text console. Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | video kconfig console_normalSimon Glass2016-01-30-3/+14
| | | | | | | | | | | | Signed-off-by: Simon Glass <sjg@chromium.org> [agust: rebased on current master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | video: Add stb TrueType font rendererSimon Glass2016-01-30-0/+3240
| | | | | | | | | | | | | | | | | | | | | | | | This is a header file which provides a fairly light-weight TrueType rendering implementation. It is pulled from http://nothings.org/. The code style does not comply with U-Boot but I think it is best to leave alone to permit the source to be synced later if needed. The only change is to fix a reference to fabs() which should route through a macro to allow U-Boot to provide its own version. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-dmTom Rini2016-01-29-26/+1269
|\ \
| * | Implement "pci enum" command for CONFIG_DM_PCIStephen Warren2016-01-28-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_DM_PCI enabled, PCI buses are not enumerated at boot, as they are without that config option enabled. No command exists to enumerate the PCI buses. Hence, unless some board-specific code causes PCI enumeration, PCI-based Ethernet devices are not detected, and network access is not available. This patch implements "pci enum" in the CONFIG_DM_PCI case, thus giving a mechanism whereby PCI can be enumerated. do_pci()'s handling of case 'e' is moved into a single location before the dev variable is assigned, in order to skip calculation of dev. The enum sub-command doesn't need the dev value, and skipping its calculation avoids an irrelevant error being printed. Using a command to initialize PCI like this has a disadvantage relative to enumerating PCI at boot. In particular, Ethernet devices are not probed during PCI enumeration, but only when used. This defers setting variables such as ethact, ethaddr, etc. until the first network-related command is executed. Hopefully this will not cause further issues. Perhaps in the long term, we need a "net start/enum" command too? Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | dm: Remove device_probe_child()Simon Glass2016-01-28-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This function is not used as the use case for it did not eventuate. Remove it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | tpm: st33zp24: Add tpm st33zp24 spi supportChristophe Ricard2016-01-28-0/+682
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for TPM ST33ZP24 spi. The ST33ZP24 does have a spi interface. The transport protocol is proprietary. For spi we are relying only on DM_SPI. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
| * | tpm: st33zp24: Add tpm st33zp24 support with i2cChristophe Ricard2016-01-28-0/+553
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for TPM ST33ZP24 family with i2c. For i2c we are relying only on DM_I2C. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
| * | tpm: Rename tpm_tis_infineon.h to tpm_tis.h and move infineon specific stuff ↵Christophe Ricard2016-01-28-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in tpm_infineon.c I2C protocol is not standardize for TPM 1.2. TIS prococol is define by the Trusted Computing Group and potentially available on several TPMs. tpm_tis_infineon.h header is not generic enough. Rename tpm_tis_infineon.h to tpm_tis.h and move infineon specific defines/variables to tpm_tis_infineon.c Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
| * | tpm: tpm_tis_lpc: fix typoChristophe Ricard2016-01-28-1/+1
| | | | | | | | | | | | | | | | | | | | | TPM_TIS_LPC is connected to the LPC bus, not I2C. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-01-28-214/+837
|\ \ \ | |/ / |/| |
| * | net: phy: implements probe for Cortina phyShaohui Xie2016-01-28-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Cortina phy cannot support soft reset, this commit implements probe for Cortina PHY to tell phylib to skip phy soft reset by setting PHY_FLAG_BROKEN_RESET in flags. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: introduce a quirk PHY_FLAG_BROKEN_RESETShaohui Xie2016-01-28-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver always performs a phy soft reset when connecting the phy device, but soft reset is not always supported by a phy device, so introduce a quirk PHY_FLAG_BROKEN_RESET to let such a phy device to skip soft reset. This commit uses 'flags' of phy device structure to store the quirk. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: micrel: fix divisor value for KSZ9031 phy skewDinh Nguyen2016-01-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The picoseconds to register value divisor(ps_to_regval) should be 60 and not 200. Linux has KSZ9031_PS_TO_REG defined to be 60 as well. 60 is the correct divisor because the 4-bit skew values are defined from 0x0000(-420ps) to 0xffff(480ps), increments of 60. For example, a DTS skew value of 420, represents 0ps delay, which should be 0x7. With the previous divisor of 200, it would result in 0x2, which represents a -300ps delay. With this patch, ethernet on the SoCFPGA DE0 Atlas is now able to work with 1Gb ethernet. References: http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf -> page 26 Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: Use 'autoneg' flag from phydevAlexandre Messier2016-01-28-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the 'autoneg' flag available in phydev when checking if autoneg is in use. The previous implementation was checking directly in the PHY if autoneg was supported. Some PHYs will report that autoneg is supported, even when it is disabled. Thus it is not possible to use that bit to determine if autoneg is currently in use or not. Signed-off-by: Alexandre Messier <amessier@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: Set ANRESTART in setup_forcedAlexandre Messier2016-01-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When configuring a PHY in fixed (forced) link mode, in order for the changes to be applied, either one of these conditions must be triggered: 1- PHY is reset 2- Autoneg is restarted 3- PHY transitions from power-down to power-up Neither of these is currently done, so effectively the fixed link configuration is not applied in the PHY. Fix this by setting the Autoneg restart bit. Signed-off-by: Alexandre Messier <amessier@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: micrel: Disable B_CAST on configAlexandre Messier2016-01-28-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Micrel PHYs KSZ8021/31 and KSZ8081 have a feature where MDIO address 0 is considered as a broadcast address; the PHY will respond even if it is not its configured (pinstrapped) address. This feature is enabled by default. The Linux kernel disables that feature at initialisation, but not before it probes the MDIO bus. This causes an issue, because a PHY at address 3 will be discovered at addresses 0 and 3, but will then only respond at address 3. Because Linux attaches the first PHY it discovers on 'eth0', it will attach the PHY from address 0, which will never answer again. Fix the issue by disabling the broadcast feature in U-Boot, before Linux is started. Signed-off-by: Alexandre Messier <amessier@tycoint.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | tegra: Report errors from PCI initSimon Glass2016-01-28-1/+5
| | | | | | | | | | | | | | | | | | | | | This function can fail, so be sure to report any errors that occur. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net/designware: add support of max-speed device tree propertyAlexey Brodkin2016-01-28-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This property allows to specify fastest connection mode supported by the MAC (as opposed to features of the phy). There are situations when phy may handle faster modes than the MAC (or even it's particular implementation or even due to CPU being too slow). This property is a standard one in Linux kernel these days and some boards do already use it in their device tree descriptions. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sonic Zhang <sonic.zhang@analog.com> cc: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net/designware: do explicit port selection for 1Gb modeAlexey Brodkin2016-01-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current implementation only sets "port select" bit for non-1Gb mode. That works fine if GMAC has just exited reset state but we may as well change connection mode in runtime. Then we'll need to reprogram GMAC for that new mode of operation and if previous mode was 10 or 100 Mb and new one is 1 Gb we'll need to reset port mode bit. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sonic Zhang <sonic.zhang@analog.com> cc: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers/net/phy: introduce phy_set_supported()Alexey Brodkin2016-01-28-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new function will allow MAC drivers to override supported capabilities of the phy. It is required when MAC cannot handle all speeds supported by phy. For example phy supports up-to 1Gb connections while MAC may only work in modes up to 100 or even 10 Mbit/sec. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: genphy: Allow overwriting featuresSascha Hauer2016-01-28-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. This is a copy of the patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c242a47238fa2a6a54af8a16e62b54e6e031d4bc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: ensure Gigabit features are masked off if requestedFlorian Fainelli2016-01-28-18/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet MAC, the driver will restrict the phydev->supported modes to mask off Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features set by default in MII_CTRL1000, it will keep advertising these feature, so by the time we call genphy_config_advert(), the condition on phydev->supported having the Gigabit features on is false, and we do not update MII_CTRL1000 with updated values, and we keep advertising Gigabit features, eventually configuring the PHY for Gigabit whilst the Ethernet MAC does not support that. This patches fixes the problem by ensuring that the Gigabit feature bits are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit PHY, and then, if Gigabit features are supported, setting those and updating MII_CTRL1000 accordingly. This is a copy of patch from Linux kernel, see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5273e3a5ca94fbeb8e07d31203069220d5e682aa Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Use priv->tbiaddr to initialize TBI PHY addressBin Meng2016-01-28-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver, it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we can get this from device tree. Update the bindings doc as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Add driver model ethernet supportBin Meng2016-01-28-0/+186
| | | | | | | | | | | | | | | | | | | | | | | | This adds driver model support to Freescale TSEC ethernet driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Use tsec_private pointer as the parameter for internal routinesBin Meng2016-01-28-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | For internal routines like redundant_init(), startup_tsec() and init_phy(), change to use tsec_private pointer as the parameter. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Adjust orders to avoid forward declaration of tsec_send()Bin Meng2016-01-28-105/+103
| | | | | | | | | | | | | | | | | | | | | | | | Adjust static functions in a proper order so that forward declaration of tsec_send() can be avoided. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Move rxbd and txbd to struct tsec_privateBin Meng2016-01-28-37/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | rxbd and txbd are declared static with 8 byte alignment requirement, but they can be put into struct tsec_private as well and are natually aligned to 8 byte. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: Move rx_idx and tx_idx to struct tsec_privateBin Meng2016-01-28-28/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | At present rx_idx and tx_idx are declared as static variables in the driver codes. To support multiple interfaces, move it to struct tsec_private. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: tsec: fsl_mdio: Fix several cosmetic issuesBin Meng2016-01-28-29/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the tsec and fsl_mdio driver codes a little bit, by: - Fix misuse of tab and space here and there - Use correct multi-line comment format - Replace license identifier to GPL-2.0+ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: vsc9953: Add LAG supportCodrin Ciubotariu2016-01-28-1/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | You can now configure LAG on VSC9953's ports using the command: ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>} A port must belong to a single LAG. By default, a port belongs to a LAG equal to the port's number. For each frame, a hash will be calculated based on Source/Destination MAC addresses, Source/Destination IP(v4/v6) addresses, Source/Destination ports. This hash will be used to select a single egress port from LAG. This also assures that frames from the same flow will always have the same egress port. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | drivers: net: vsc9953: Fix FDB aging timeCodrin Ciubotariu2016-01-28-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | By default, the aging period is set to 0, so the dynamic FDB entries are never removed. This patch sets the aging time to 300 seconds. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: do not read configuration register on resetStefan Agner2016-01-28-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When doing a software reset, the reset flag should be written without other bits set. Writing the current state will lead to restoring the state of the PHY (e.g. Powerdown), which is not what is expected from a software reset. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-28-0/+50
|\ \ \
| * | | misc: Add simple driver to enable the legacy UART on Winbond Super IO chipsStefan Roese2016-01-28-0/+50
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8) are provided by a superio chip connected to the LPC bus. We must program the superio chip so that serial ports are available for us. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-23/+316
|\ \ \
| * | | spi: fsl_qspi: Fix qspi_op_rdsr memcpy issueGong Qianyu2016-01-27-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current driver, we always copy 4 bytes to the dest memory. Actually the dest memory may be shorter than 4 bytes. Add an argument to indicate the dest memory length. Avoid writing memory outside of the bounds. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | spi: fsl_qspi: Fix qspi_op_rdid memcpy issueGong Qianyu2016-01-27-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current driver everytime we memcpy 4 bytes to the dest memory regardless of the remaining length. This patch adds checking the remaining length before memcpy. If the length is shorter than 4 bytes, memcpy the actual length of data to the dest memory. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | spi: fsl_qspi: fix compile warning for 64-bit platformGong Qianyu2016-01-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile warning: drivers/spi/fsl_qspi.c: In function 'fsl_qspi_probe': drivers/spi/fsl_qspi.c:937:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->regs = (struct fsl_qspi_regs *)plat->reg_base; ^ Just make the cast explicit. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | mmc: fsl_esdhc: set Abort command type for CMD12Yangbo Lu2016-01-27-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to SD spec, CMD12, CMD52 for writing I/O abort in CCCR need to be set an Abort command type when they are sent. So, we remove all chip-specific #ifdefs and make it available for all platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | mmc: fsl_esdhc: increase data transaction timeout to 500msYangbo Lu2016-01-27-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MMC spec says "It is strongly recommended for hosts to implement more than 500ms timeout value even if the card indicates the 250ms maximum busy length." Even the previous value of 300ms is known to be insufficient for some cards. So, increase the timeout to 500ms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | driver: net: fsl-mc: Remove portal id hard-codingPrabhakar Kushwaha2016-01-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Management Complex firmware 9.0 has fixed the issue of dprc_destroy_container i.e. the used portal is not return to the free pool. Which was resulting in error ethernet driver want to use this portal via either DPL or dynamically in Linux. Hard-coding of portal id is removed. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | driver: net: ldpaa: Add debug info of printing DPMAC statsPrabhakar Kushwaha2016-01-27-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add debug information prints to provide DPMAC statistics - Number of bytes received - Number of received and discard frames - Number of bytes transferred - Number of frames transferred etc. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | driver: net: ldpaa: Increase num of buffers for a poolPrabhakar Kushwaha2016-01-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Management Complex FW 9.0 set the hardware depletion to be 20 buffers in order to support multiple pools in DPNI. This requires driver to fill the pool with at least 21 to be able to receive frames. So, Increase number of buffers for a pool. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | driver: net: ldpaa: Report back only error frames for txPrabhakar Kushwaha2016-01-27-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Management Complex FW 9.0 puts a new requirement to provide Tx confirmation and error queue configuration by calling dpni_set_tx_conf API. Configure report of only error frames for a tx frame. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | driver: net: fsl-mc: Prepare extended cfg for DPNI createPrabhakar Kushwaha2016-01-27-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Management Complex FW 9.0 puts a new requirement to prepare extended parameters which should be provided as input in dpni_create. extended parameters includes traffic class and IP reassembly configurations. So prepare extended parameters with default "0" as input for dpni_create. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-08-25 16:37:07 +0000