summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* da850/omap-l138: davinci_emac: Suppress auto negotiation if neededBastian Ruppert2012-10-01-1/+2
| | | | | | | | | | | | | | negotiation is enabled in RMII mode. Some boards based on da850 need to suppress this procedure. CC: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> CC: Lad, Prabhakar <prabhakar.lad@ti.com> CC: Hadli, Manjunath <manjunath.hadli@ti.com> CC: sbabic@denx.de Acked-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com> Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de> Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
* video: cfb_console: add function to plot the logo area blackBastian Ruppert2012-10-01-4/+42
| | | | | | | Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Anatolij Gustschin <agust@denx.de> CC: Tom Rini <trini@ti.com> CC: Stefano Babic <sbabic@denx.de>
* video: cfb_console: logo can be positioned via the splashpos variableBastian Ruppert2012-10-01-25/+69
| | | | | | | | | | Extend the driver for placing the video/bmp logo as specified by "splashpos" environment variable. Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> CC: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* Merge remote-tracking branch 'u-boot/master'Albert ARIBAUD2012-09-30-925/+73554
|\
| * remove unnecessary code in ata_piixPavel Herrmann2012-09-28-3/+0
| | | | | | | | | | | | | | | | | | | | We set sata_curr_device to 0 right after returning from init_sata(), so there's no point in setting it to the last scanned driver at this point. Note: there are more duplicities with cmd_sata, but those might be required, as the code seems to reset the entire controller on every scan, ignoring the requested port number. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2012-09-27-124/+70614
| |\
| | * FEC: Replace magic contantsMarek Vasut2012-09-27-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the magic contant 1 << 24 with properly defined bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * FEC: Rework the TX wait mechanismMarek Vasut2012-09-27-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mechanism waiting for transmission to finish in fec_send() now relies on the E-bit being cleared in the TX buffer descriptor. In case of data cache being on, this means invalidation of data cache above this TX buffer descriptor on each test for the E-bit being cleared. Apparently, there is another way to check if the transmission did complete. This is by checking the TDAR bit in the X_DES_ACTIVE register. Reading a register does not need any data cache invalidation, which is beneficial. Rework the sequence that wait for completion of the transmission so that the TDAR bit is tested first and afterwards check the E-bit being clear. This cuts down the number of cache invalidation calls to one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * FEC: Remove endless loop in the FEC driverMarek Vasut2012-09-27-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FEC hardware sometimes errors out on data transfer and hangs in the tightloop adjusted by this patch. So add timeout into the tightloop to make such a hang recoverable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * FEC: Properly align address over the buffers for cache opsMarek Vasut2012-09-27-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Align the address that's to be invalidated/flushed properly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advans> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
| | * FEC: Do not pass unaligned buffer to network stackMarek Vasut2012-09-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not pass unaligned RX buffer to the upper layers. The upper layer, especially in the ARP case, recycles the buffer and passes it back into the FEC, into it's TX path. With caches enabled, the FEC hangs on this from time to time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advans> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * net: Add Vitesse VSC8662 PHY supportPriyanka Jain2012-09-27-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -VSC8662 is Dual Port 10/100/1000Base-T Phy, 100Base-FX/1000/Base-X Gigabit Ethernt Transceiver Phy. -Its register set and features are similar to other Vitesse Phys Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| | * net/phy: support the mv88e6352 switchValentin Longchamp2012-09-27-0/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the configuration of an external switch from the 88E6xxx series from Marvell trough an MDIO link using indirect adressing. This can be used if we do not want to use an EEPROM for the configuration. This driver is not generic and was not tested on other switches than the 88e6352. This is proposed as a first implementation that is somewhat limited but works and that can be used as a basis for further developments for this switch family. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Joe Hershberger <joe.hershberger@gmail.com>
| | * net: Add driver for Zynq Gem IPMichal Simek2012-09-26-0/+441
| | | | | | | | | | | | | | | | | | | | | | | | | | | Device driver for Zynq Gem IP. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| | * net: asix: add AX88772B supportLucas Stach2012-09-26-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add AX88772B ID together with two fixes needed to make this work. 1. The packet length check has to be adjusted, as all ASIX chips only use 11 bits to indicate the length. AX88772B uses the other bits to indicate unrelated things, which cause the check to fail. This fix is based on a fix for the Linux kernel by Marek Vasut. Linux upstream commit: bca0beb9363f8487ac902931a50eb00180a2d14a 2. AX88772B provides several bulk endpoints. Only the first IN/OUT endpoints work in the default configuration. So stop enumeration after we found them to avoid overwriting the endpoint config with a non-working one. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: asix: add read_mac functionLucas Stach2012-09-26-12/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial device MAC should be read while getting info about the device, so it's wrong to only read it in asix_init(). Add a dedicated function to read the initial MAC, which is also able to handle devices that have their initial MAC stored in EEPROM. Call this function inasix_eth_get_info(). Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: asix: add write_hwaddr functionLucas Stach2012-09-26-11/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All ASIX chipsets aside from AX88172 are able to set the MAC address on the hardware level. Add a function to expose this ability. To differentiate between chip types we now carry flags as driver private data. Also while touching the asix_dongles array constify this. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: asix: split out basic reset functionLucas Stach2012-09-26-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The basic device reset ensures that the device is ready to service commands and does not need to get redone before each network operation. Split out the basic reset from asix_init() and instead call it from asix_eth_get_info(), so that it only gets called once. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: introduce transparent driver private in ueth_dataLucas Stach2012-09-26-14/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid clutter in ueth_data. Individual drivers should not mess with structures belonging to the core like this. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: Filter incoming netconsole packets by IPJoe Hershberger2012-09-24-2/+6
| | | | | | | | | | | | | | | | | | | | | Check the incoming packets' source IP address... if ncip isn't set to a broadcast address, only listen to the client at ncip. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: Allow netconsole settings to change after nc_startJoe Hershberger2012-09-24-31/+65
| | | | | | | | | | | | | | | | | | | | | Refresh the netconsole settings from the env before each packet instead of only on netconsole init. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * net: Improve the speed of netconsoleJoe Hershberger2012-09-24-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously u-boot would initialize the network interface for every network operation and then shut it down again. This makes sense for most operations where the network in not known to be needed soon after the operation is complete. In the case of netconsole, it will use the network for every interaction with the shell or every printf. This means that the network is being reinitialized very often. On many devices, this intialization is very slow. This patch checks for consecutive netconsole actions and leaves the ethernet hardware initialized between them. It will still behave the same old way for all other network operations and any time another network operation happens between netconsole operations. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| | * net: Make the netconsole buffer size configurableJoe Hershberger2012-09-24-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allow a board to configure a larger buffer for netconsole, but leave the default. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * net: sh_eth: Add support R8A7740 of rmobile (arm core)Nobuhiro Iwamatsu2012-09-24-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | R8A7740 of rmobile has ethernet device, and this is same IP of sh-ether. This support R8A7740 of rmobile. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * dm: net: Fixup the armada100 FEC driverMarek Vasut2012-09-24-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apply the following questionable adjustment to silence GCC. armada100_fec.c: In function ‘armdfec_send’: armada100_fec.c:589:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * net: emaclite: Support OF initializationMichal Simek2012-09-24-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | Support new CONFIG_OF_CONTROL option where device probing is done based on device tree description. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com>
| | * dm: net: Move IXP NPE to drivers/net/Marek Vasut2012-09-24-0/+69488
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bryan Hundven <bryanhundven@gmail.com> Cc: Michael Schwingen <rincewind@discworld.dascon.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: U-Boot DM <u-boot-dm@lists.denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
| | * net: Make netconsole src and dest ports configurableJoe Hershberger2012-09-24-9/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is desirable to use different port numbers for sending and receiving packets with netconsole in the case where you have more than one device on the local subnet with netconsole enabled for broadcast. When they use the same port for both, any output from one will look like input to the other. This is typlically not desirable. This patch allows the input and output ports to be specified separately in the environment. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
| * | SPL: SPI: Enhance spi_spl_load to match the other load functionsTom Rini2012-09-27-11/+12
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORKTom Rini2012-09-27-65/+0
| | | | | | | | | | | | | | | | | | | | | | | | - Convert the non-relocation part of board_init_f to spl_board_init, turn on CONFIG_SPL_BOARD_INIT in the configs. - Remove duplicated code. - Add spl_boot_device() that returns the statically chosen boot device. Signed-off-by: Tom Rini <trini@ti.com>
| * | SPL: Move the omap SPL framework to common/splTom Rini2012-09-27-1/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2012-09-25-19/+2
| |\ \
| | * | video/powerpc: don't touch DIU registers that we don't needTimur Tabi2012-09-21-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several DIU registers were being initialized either unnecessarily or to wrong values. 1) All interrupts were enabled even though there's no interrupt handler. Interrupts were left enabled when booting Linux. 2) Don't configure a dummy area descriptor, since we don't support ADs in U-Boot. 3) Don't configure any write-back buffer registers, since we don't use that mode. 4) The default values for the THRESHOLDS, SYN_POL, and PLUT registers should be used, so don't touch those registers either. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2012-09-25-115/+199
| |\ \ \ | | |_|/ | |/| |
| | * | powerpc/fsl-corenet: remove dead variant symbolsScott Wood2012-08-23-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are not supported as individual build targets, but instead are supported by another target. The dead p4040 defines in particular had bitrotted significantly. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/85xx: remove support for the Freescale P3060Timur Tabi2012-08-23-98/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The P3060 was cancelled before it went into production, so there's no point in supporting it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | fm-eth: use fdt_status_disabled() function in ft_fixup_port()Timur Tabi2012-08-23-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a dedicated function for setting the node status now, so use it. Also improve a comment and fix the type of the phandle variable. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | fm-eth: add function fm_info_get_phy_address()Timur Tabi2012-08-23-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function fm_info_get_phy_address() returns the PHY address for a given Fman port. This is handy when the MDIO code needs to fixup the Ethernet nodes in the device tree to point to PHY nodes for a specific PHY address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/85xx: add support for FM2 DTSEC5Timur Tabi2012-08-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike previous SOCs, the Freescale P5040 has a fifth DTSEC on the second Fman, so add the Fman and SerDes macros for that DTSEC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/mpc8xxx: Remove P1015 and P1016 from CPU listYork Sun2012-08-23-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1015 is the same as P1011 and P1016 is the same as P1012 from software point of view. They have different packages but share SVRs. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/corenet_ds: Slave module for boot from PCIELiu Gang2012-08-23-6/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When boot from PCIE, slave's core should be in holdoff after powered on for some specific requirements. Master will release the slave's core at the right time by PCIE interface. Slave's ucode and ENV can be stored in master's memory space, then slave can fetch them through PCIE interface. For the corenet platform, ucode is for Fman. NOTE: Because the slave can not erase, write master's NOR flash by PCIE interface, so it can not modify the ENV parameters stored in master's NOR flash using "saveenv" or other commands. environment and requirement: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image is in master NOR flash. 3. Put the slave's ucode and ENV into it's own memory space. 4. Normally boot from local NOR flash. 5. Configure PCIE system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to one PCIE interface by RCW. 3. RCW should configure the SerDes, PCIE interfaces correctly. 4. Must set all the cores in holdoff by RCW. 5. Must be powered on before master's boot. For the slave module, need to finish these processes: 1. Set the boot location to one PCIE interface by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID of one PCIE for the boot. 4. Set a specific TLB entry in order to fetch ucode and ENV from master. 5. Set a LAW entry with the TargetID one of the PCIE ports for ucode and ENV. 6. Slave's u-boot image should be generated specifically by make xxxx_SRIO_PCIE_BOOT_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. In addition, the processes are very similar between boot from SRIO and boot from PCIE. Some configurations like the address spaces can be set to the same. So the module of boot from PCIE was added based on the existing module of boot from SRIO, and the following changes were needed: 1. Updated the README.srio-boot-corenet to add descriptions about boot from PCIE, and change the name to README.srio-pcie-boot-corenet. 2. Changed the compile config "xxxx_SRIOBOOT_SLAVE" to "xxxx_SRIO_PCIE_BOOT", and the image builded with "xxxx_SRIO_PCIE_BOOT" can support both the boot from SRIO and from PCIE. 3. Updated other macros and documents if needed to add information about boot from PCIE. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/corenet_ds: Master module for boot from PCIELiu Gang2012-08-23-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the powerpc processors with PCIE interface, boot location can be configured from one PCIE interface by RCW. The processor booting from PCIE can do without flash for u-boot image. The image can be fetched from another processor's memory space by PCIE link connected between them. The processor booting from PCIE is slave, the processor booting from normal flash memory space is master, and it can help slave to boot from master's memory space. When boot from PCIE, slave's core should be in holdoff after powered on for some specific requirements. Master will release the slave's core at the right time by PCIE interface. Environment and requirement: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image is in master NOR flash. 3. Normally boot from local NOR flash. 4. Configure PCIE system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to one PCIE interface by RCW. 3. RCW should configure the SerDes, PCIE interfaces correctly. 4. Must set all the cores in holdoff by RCW. 5. Must be powered on before master's boot. For the master module, need to finish these processes: 1. Initialize the PCIE port and address space. 2. Set inbound PCIE windows covered slave's u-boot image stored in master's NOR flash. 3. Set outbound windows in order to configure slave's registers for the core's releasing. 4. Should set the environment variable "bootmaster" to "PCIE1", "PCIE2" or "PCIE3" using the following command: setenv bootmaster PCIE1 saveenv Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macroLiu Gang2012-08-23-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When compile the slave image for boot from SRIO, no longer need to specify which SRIO port it will boot from. The code will get this information from RCW and then finishes corresponding configurations. This has the following advantages: 1. No longer need to rebuild an image when change the SRIO port for boot from SRIO, just rewrite the new RCW with selected port, then the code will get the port information by reading new RCW. 2. It will be easier to support other boot location options, for example, boot from PCIE. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2012-09-21-4/+4
| |\ \ \
| | * | | pci: fix some warnings related to assumptions aboutKumar Gala2012-09-22-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit introduced some warnings associated with using pci_addr_t instead of a proper 32-bit data type. commit af778c6d9e2b945ee03cbc53bb976238a3374f33 Author: Andrew Sharp <andywyse6@gmail.com> Date: Wed Aug 1 12:27:16 2012 +0000 pci: fix errant data types and corresponding access functions On some platforms pci_addr_t is defined as a 64-bit data type so its not proper to use with pci_{read,write}_config_dword. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-09-21-193/+1359
| |\ \ \ \
| * | | | | usb: do explicit unaligned accessesLucas Stach2012-09-21-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_hub_descriptor has to be packed as it's used for communication with the device. Member wHubCharacteristics violates the natural alignment rules. Use explicit unaligned access functions for this member. Fixes ARMv7 traping while using USB. v2: fix typo found by Thomas Langer v3: rebased on top of u-boot-usb/master Signed-off-by: Lucas Stach <dev@lynxeye.de>
| * | | | | dfu:usb:fix: Read the "filesize" environment variable only when file readŁukasz Majewski2012-09-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "filesize" environment variable shall be read only when relevant file is read. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | | | | dfu:usb: Support for ext4Łukasz Majewski2012-09-21-6/+26
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for ext4 file system handling at DFU. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | | | ColdFire: Queued SPI driverRichard Retanubun2012-09-20-0/+374
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for Freescale Colfire Queued SPI bus. Coded to work with 8 bits per transfer to use with SPI flash. CPOL, CPHA, and CS_ACTIVE_HIGH can be configured. Tested with MCF5270 which have 4 chip selects. Activate by #define CONFIG_CF_QSPI in board config. Signed-off-by: Richard Retanubun <richardretanubun@ruggedcom.com>