summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2015-01-20-25/+987
|\
| * mmc: Skip changing bus width for MMC cards earlier than version 4.0Andrew Gabbasov2015-01-19-2/+5
| | | | | | | | | | | | | | | | | | | | | | Wider bus widths (larger than default 1 bit) appeared in MMC standard version 4.0. So, for MMC cards of any earlier version trying to change the bus width (including ext_csd comparison) does not make any sense. It may work incorrectly and at least cause unnecessary timeouts. So, just skip the entire bus width related activity for earlier versions. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
| * mmc: Avoid redundant switching to 1-bit bus width for MMC cardsAndrew Gabbasov2015-01-19-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If all the commands switching an MMC card to 4- or 8-bit bus width fail, and the bus width for the controller and the driver is still set to default 1 bit, there is no need to send one more command to switch the card to 1-bit bus width. Also, if the card or host controller do not support wider bus widths, there is no need to send a switch command at all. However, if one of switch commands succeeds, but the subsequent ext_csd fields comparison fails, the card should be switched to some other bus width (next in the list for the loop), or to default 1-bit bus width as a last resort. That's why it would be incorrect to just remove the 1-bit bus width case from the list, it should still be processed in some cases. panto: Minor cosmetic edit removing superfluous parentheses. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
| * mmc: extend mmcinfo output to show partition write reliability settingsDiego Santa Cruz2015-01-19-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the mmcinfo hardware partition info output to show partitions with write reliability enabled with the "WRREL" string. If the partition does not have write reliability enabled the "WRREL" string is omitted; this is analogous to the ehhanced attribute. Example output: Device: OMAP SD/MMC Manufacturer ID: fe OEM: 14e Name: MMC16 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.41 High Capacity: Yes Capacity: 13.8 GiB Bus Width: 4-bit Erase Group Size: 8 MiB HC WP Group Size: 16 MiB User Capacity: 13.8 GiB ENH WRREL User Enhanced Start: 0 Bytes User Enhanced Size: 512 MiB Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH GP1 Capacity: 64 MiB ENH WRREL GP2 Capacity: 64 MiB ENH WRREL Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: extend the mmc hardware partitioning API with write reliabilityDiego Santa Cruz2015-01-19-0/+39
| | | | | | | | | | | | | | | | | | The eMMC partition write reliability settings are to be set while partitioning a device, as per the eMMC spec, so changes to these attributes needs to be done in the hardware partitioning API. This commit adds such support. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: add API to do eMMC hardware partitioningDiego Santa Cruz2015-01-19-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds an API to do hardware partitioning on eMMC devices. The new mmc_hwpart_config() function does the partitioning in one go. As the different attributes and partitioning options on eMMC may be interdependent validation has to be done based on the complete partitioning configuration. The function accepts three modes: - MMC_HWPART_CONF_CHECK: just validates that the configuration is valid. - MMC_HWPART_CONF_SET: validates and sets all the fields in EXT_CSD but without setting the "partitioning completed" bit, and thus is reversible. - MMC_HWPART_CONF_COMPLETE: does everything and is thus not reversible. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: the ext_csd data may be used during init even if reading failedDiego Santa Cruz2015-01-19-1/+3
| | | | | | | | | | | | | | | | | | | | The mmc_startup() function uses the ext_csd data even if reading it from the mmc device failed. This bug was introduced in commit bc897b1d4d86597311430dbe7b3e6c807c8c53e5. We now bail out if reading it fails, this should not be a problem as ext_csd was introduced in MMC 4.0 and this code is conditional on MMC >= 4.0. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: eMMC partitioning data is not effective till partitioning completedDiego Santa Cruz2015-01-19-23/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec says that partitioning is only effective after the PARTITION_SETTING_COMPLETED is set in EXT_CSD (and a power cycle was done, but that we cannot know). Thus the partition sizes and attributes should be ignored when that bit is not set, otherwise the various capacities are not coherent (e.g., the user data capacity will be that of the unpartitioned device while partition sizes would be non-zero). Prescence of non-zero partitioning data is nevertheless still used to activate the high-capacity size definitions (EXT_CSD_ERASE_GROUP_DEF) as it is necessary to set that to write any of the partitioning fields in EXT_CSD, so having partitioning data means someone previously activated that and we should keep it activated. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: read the high capacity WP group size for eMMCDiego Santa Cruz2015-01-19-0/+6
| | | | | | | | | | | | | | | | Read the eMMC high capacity write protect group size at mmc device initialization. This is useful to correctly partition an eMMC device, as partitions need to be aligned to this size. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: fix erase_grp_size computation with high-capacity size definitionDiego Santa Cruz2015-01-19-2/+1
| | | | | | | | | | | | | | | | | | The erase_grp_size in struct mmc is to be a size in 512-byte sectors but the code used to compute it for eMMC when EXT_CSD_ERASE_GROUP_DEF is enabled computed it as bytes, leading to erase sizes and alignment much larger than what is actually required by the mmc device. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: read the size of eMMC enhanced user data areaDiego Santa Cruz2015-01-19-0/+15
| | | | | | | | | | | | | | | | This modification reads the size of the eMMC enhanced user data area upon initialization of an mmc device, it will be used later by mmcinfo. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: computation of eMMC GP partition size was missing 512 KiB factorDiego Santa Cruz2015-01-19-0/+1
| | | | | | | | Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: incomplete test to switch to high-capacity group size definitionsDiego Santa Cruz2015-01-19-22/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec mandates that the high-capacity group size definitions should be enabled when the device is partitioned (by setting ERASE_GROUP_DEF in EXT_CSD). The current test to determine when this is required misses a few cases. In particular a device may have been partitioned without setting the enhanced attribute on any partition or partitioning may be completed without creating any extra partitions. This change moves the code to set ERASE_GROUP_DEF to after reading all partition information. It is also enabled when PARTITIONING_SETTING_COMPLETED is set as it is necessary to enable ERASE_GROUP_DEF before setting that bit, so it means that the user previously switched to the high capacity definitions. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: extend mmcinfo to show enhanced partition attributeDiego Santa Cruz2015-01-19-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the mmcinfo command's output to show which eMMC partitions have the enhanced attribute set. Note that the eMMC spec says that if the enhanced attribute is supported then the boot and RPMB partitions are of the enhanced type. The output of mmcinfo becomes: Device: OMAP SD/MMC Manufacturer ID: fe OEM: 14e Name: MMC16 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.41 High Capacity: Yes Capacity: 13.8 GiB Bus Width: 4-bit User Capacity: 13.8 GiB ENH Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH GP1 Capacity: 64 MiB ENH GP2 Capacity: 64 MiB ENH Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoCNobuhiro Iwamatsu2015-01-19-0/+705
| | | | | | | | | | | | | | | | This adds Renesas rmobile ARM SoC's SD/MMC host support. This drivers tested with Gose board and Koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | usb: eth: asix88179: add ability to modify MAC addressRene Griessl2015-01-18-0/+14
| | | | | | | | | | | | | | This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250) Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
* | musb-new: Add interrupt queue supportHans de Goede2015-01-18-0/+65
| | | | | | | | | | | | | | Add interrupt queue support, so that a usb keyboard can be used without causing huge latencies. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Add urb and hep parameters to construct_urbHans de Goede2015-01-18-32/+31
| | | | | | | | | | | | | | | | Make construct_urb take an urb and hep parameter, rather then having it always operate on the file global urb and hep structs. This is a preperation patch for adding interrupt queue support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Properly remove a transfer from the schedule on timeoutHans de Goede2015-01-18-3/+14
| | | | | | | | | | | | | | | | | | | | | | If a transfer / urb times-out, properly remove it from the schedule, rather then letting it sit on the ep head. This stops the musb code from getting confused and refusing to queue further transfers after a timeout. Tested by unplugging a usb-keyboard, replugging it and doing a usb-reset, before this commit the keyboard would not work after the usb-reset. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Fix reset sequence when in host modeHans de Goede2015-01-18-11/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a number of issues with the reset sequence of musb-new in host mode: 1) Our usb device probe relies on a second device reset being done after the first descriptors read. Factor the musb reset code into a usb_reset_root_port function (and add this as an empty define for other controllers), and call this when a device has no parent. 2) Just like with normal usb controllers there needs to be a delay after reset, for normal usb controllers, this is handled in hub_port_reset, add a delay to usb_reset_root_port. 3) Sync the musb reset sequence with the upstream kernel, clear all bits of power except bits 4-7, and increase the time reset is asserted to 50 ms. With these fixes an usb keyboard I have now always enumerates properly, where as earlier it would only enumerare properly once every 5 tries. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Fix interrupt transfers not workingHans de Goede2015-01-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For bulk and ctrl transfers common/usb.c sets udev->status = USB_ST_NOT_PROC, but it does not do so for interrupt transfers. musb_uboot.c: submit_urb() however was waiting for USB_ST_NOT_PROC to become 0, and thus without anyone setting USB_ST_NOT_PROC would exit immediately for interrupt urbs, returning the urb status of EINPROGRESS as error. This commit fixes this, thereby also making usb_kbd.c work together with musb_new and CONFIG_SYS_USB_EVENT_POLL. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Use time based timeouts rather then cpu-cycles based timeoutsHans de Goede2015-01-18-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | CPU cycle based timeouts are no good, because how long they use depends on CPU speed. Instead use time based timeouts, and wait one second for a device connection to show up (per the USB spec), and wait USB_TIMEOUT_MS for various urbs to complete. This fixes "usb start" taking for ever when no device is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Add sunxi musb controller supportHans de Goede2015-01-18-0/+280
| | | | | | | | | | | | | | This is based on Jussi Kivilinna's work for the linux-sunxi-3.4 kernel to use the kernels musb driver instead of Allwinners own custom driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | musb-new: Add register defines for different reg layout on sunxiHans de Goede2015-01-18-0/+92
| | | | | | | | | | | | | | The sunxi SoCs also have a musb controller, but with a different register layout. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | usb: Add an interval parameter to create_int_queueHans de Goede2015-01-18-2/+2
| | | | | | | | | | | | | | | | Currently create_int_queue is only implemented by the ehci code, and that does not honor interrupt intervals, but other drivers which might also want to implement create_int_queue may honor intervals, so add an interval param. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | usb: gadget: pxa25x_udc: fix use-before-initialized bugAlex Sadovsky2015-01-18-2/+2
| | | | | | | | | | | | | | | | | | | | | | Fix use-before-initialized bug in pxa25x_udc driver. Function usb_gadget_register_driver calls udc_disable, and udc_disable calls pullup_off that uses dev->mach->udc_command. But dev->mach is initialized in usb_gadget_register_driver after calling udc_disable. This patch fixes the order of initialization. Signed-off-by: Alex Sadovsky <Nable.MainInbox@googlemail.com>
* | usb: gadget: f_dfu: Add get_alt function to pass the USB compliance testStefan Roese2015-01-18-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this function the USB compliance test (USB 2.0 Command Verifier) will fail in the "Interface Descriptor Test" with this error message: FAIL (1.2.51) A successful GetInterface request must return the alternate setting set by a prior call to SetInterface. Lets add this function to read back the value so that the DFU device fully passes the USB compliance test. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Enrico Leto <enrico.leto@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* | usb: gadget: composite: Fix NULL pointer crash in USB compliance testStefan Roese2015-01-18-0/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the DXR2 board (AM335x using MUSB) the USB compliance test suite (USB 2.0 Command Verifier) will cause the board to crash and reset upon the "BOS Descriptor Test - Addressed state". Here the output from the DRX2 while running this test: GADGET DRIVER: usb_dnl_dfu musb-hdrc: peripheral reset irq lost! composite_setup (776) data abort pc : [<87f693ac>] lr : [<87f6911c>] sp : 86f33a58 ip : 00000000 fp : 86f3bbac r10: 00000f00 r9 : 86f33ef4 r8 : 86f37da8 r7 : 00000005 r6 : 86f33a90 r5 : 00000000 r4 : 86f37e30 r3 : 00000000 r2 : 00000000 r1 : 87f9c888 r0 : 00000016 Flags: Nzcv IRQs off FIQs on Mode SVC_32 Resetting CPU ... resetting ... By adding the case statement for USB_DT_BOS and therefore not running into the default case (jump to unkown label) this crash is fixed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Enrico Leto <enrico.leto@siemens.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-01-16-2/+160
|\
| * pmic: add tps62362 simple wrapper codeFelipe Balbi2015-01-13-0/+48
| | | | | | | | | | | | | | | | This regulator is used with AM437x IDK to feed VDD_MPU, without means to scale VDD_MPU we can't support higher frequencies. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * mtd: OMAP: Enable GPMC prefetch modeDaniel Mack2015-01-13-2/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable GPMC's prefetch feature for NAND access. This speeds up NAND read access a lot by pre-fetching contents in the background and reading them through the FIFO address. The current implementation has two limitations: a) it only works in 8-bit mode b) it only supports read access Both is easily fixable by someone who has hardware to implement it. Note that U-Boot code uses non word-aligned buffers to read data into, and request read lengths that are not multiples of 4, so both partial buffers (head and tail) have to be addressed. Tested on AM335x hardware. Tested-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Daniel Mack <zonque@gmail.com> [trini: Make apply again, use 'cs' fix pointed out by Guido] Signed-off-by: Tom Rini <trini@ti.com>
* | powerpc: 74xx_7xx: remove 74xx_7xx cpu supportMasahiro Yamada2015-01-16-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | All the 74xx_7xx boards are still non-generic boards: P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2 Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: York Sun <yorksun@freescale.com> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | ppc4xx: remove dead codeMasahiro Yamada2015-01-16-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since commit 843125daebd7 (ppc4xx: remove HH405 board), CONFIG_HH405 is not defined. Since commit d52633047913 (ppc4xx: remove PMC405), CONFIG_PMC405 is not defined. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
* | Merge branch 'next' of git://git.denx.de/u-boot-videoTom Rini2015-01-14-63/+1
|\ \
| * | lcd: remove LCD_MONOCHROMENikita Kiryanov2015-01-10-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | No one is using LCD_MONOCHROME; remove related code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
| * | mpc8xx_lcd: get rid of CONFIG_EDT32F10Nikita Kiryanov2015-01-10-28/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | No one is using CONFIG_EDT32F10; remove related code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
| * | lcd: remove CONFIG_SYS_INVERT_COLORSNikita Kiryanov2015-01-10-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | No one is using CONFIG_SYS_INVERT_COLORS; remove related code. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
* | | sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otgHans de Goede2015-01-14-203/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the usb-controller init code found in ehci-sunxi.c also is necessary to init the otg usb controller, so move it to a common place. While at it also update various #ifdefs / defines for sun8i support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: axp221: Add support for controlling the drivebus pinHans de Goede2015-01-14-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | The axp221 / axp223's N_VBUSEN pin can be configured as an output rather then an input, add axp_drivebus_enable() and _disable() functions to set the pin in output mode and control it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: axp221: Protect axp221_init against multiple callsHans de Goede2015-01-14-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The voltage setting code knows it needs to call axp221_init before calling the various voltage setting functions. But users of axp utility functions like axp221_get_sid() do not know this, so the utility functions always call axp221_init() to ensure that the p2wi / rsb setup magic has been done. Since doing this repeatedly is quite expensive, add a check to axp221_init so that it only does the initialization once. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: axp221: correct ALDO2 description for sun6iChen-Yu Tsai2015-01-14-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | ALDO2 is used to power LPDDR2 SDRAM on both the reference design and the Hummingbird A31, when this type of RAM is present. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: video: Add support for external DAC enable pinChen-Yu Tsai2015-01-14-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The external DAC for VGA output might have either a power or reset control pin that needs to be pulled up, as is the case on the Hummingbird A31. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | sunxi: video: Add lvds supportHans de Goede2015-01-14-2/+35
| | | | | | | | | | | | | | | | | | | | | Add support for lvds lcd panels Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* | | sunxi: video: Add a hpd_delay parameter to configure hpd delayHans de Goede2015-01-14-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some extreme cases it may be necessary to wait 1.5 seconds or more for a hpd signal to show up (and be able to read edid info), but we do not want to penalize all headless boots with an extra second boot delay, so add a hpd_delay parameter which can be set through the video-mode env. variable. While at it raise the default from 300ms to 500ms as 300 may very well be too low in many cases. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Add VGA output supportHans de Goede2015-01-14-8/+52
| | | | | | | | | | | | | | | | | | | | | Add support for VGA directly from the sunxi SoC / display engine. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Fallback from HDMI to VGA on boards with VGAHans de Goede2015-01-14-22/+29
| | | | | | | | | | | | | | | | | | | | | | | | If a board has no LCD, but does have VGA fallback to VGA when no HDMI cable is connected (unless hpd=0). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Add support for using PORTD hsync/vsync pins with tcon1Hans de Goede2015-01-14-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | Add support for using PORTD hsync/vsync pins with tcon1, this is a preparation patch for adding native VGA support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delayHans de Goede2015-01-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay instead of hardcoding it to 30. We will still end up using 30 for most modes, but for e.g. 800x600 this makes a (small) difference. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Remove sunxi_display.enabled variableHans de Goede2015-01-14-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Having both a sunxi_display.enabled variable and sunxi_display.monitor == sunxi_monitor_none duplicates state, use sunxi_display.monitor = sunxi_monitor_none when ever we do not have a display. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Add support for VGA via external DACs connected to the LCD pinsHans de Goede2015-01-14-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | Add support for external DACs connected to the parallel LCD interface driving a VGA connector, such as found on the Olimex A13 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit v1.1 at 2024-12-19 12:43:09 +0000