summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* fsl_sata: Fix compiler warnings shown by gcc-4.4galak2009-07-20-81/+19
| | | | | | | | | | | | | | | | | | | | Update fsl_sata to use common structures instead of casting back and forth between the fsl specific ones and the common ones (which are identical). fsl_sata.c: In function 'scan_sata': fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:545: note: initialized from here fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules ... Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mmc: set bus width to 1 and clock to minimum early during initializationIlya Yanok2009-07-19-0/+3
| | | | | | | We need to switch back to 1-bit before initialization or SD 2.0 cards will fail to send SCR if we've switched to 4-bit already. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* Canyonlands SATA harddisk driverKazuaki Ichinohe2009-07-19-0/+2588
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a SATA harddisk driver for the canyonlands. This patch is kernel driver's porting. This patch corresponded to not cmd_scsi but cmd_sata. This patch divided an unused member with ifndef __U_BOOT__ in the structure. [environment variable, boot script] setenv bootargs root=/dev/sda7 rw setenv bootargs ${bootargs} console=ttyS0,115200 ext2load sata 0:2 0x400000 /canyonlands/uImage ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb fdt addr 0x800000 0x4000 bootm 0x400000 - 0x800000 If you drive SATA-2 disk on Canyonlands, you must change parts from PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using following disks: 1.Vendor: Fujitsu Type: MHW2040BS 2.Vendor: Fujitsu Type: MHW2060BK 3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT 4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required) 5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required) 6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required) 7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required) 8.Vendor: Transcend Type: TS32GSSD25S-M 9.Vendor: MTRON Type: MSD-SATA1525-016 Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-07-19-1669/+224
|\
| * Remove legacy NAND and disk on chip code.Scott Wood2009-07-16-1663/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Legacy NAND had been scheduled for removal. Any boards that use this were already not building in the previous release due to an #error. The disk on chip code in common/cmd_doc.c relies on legacy NAND, and it has also been removed. There is newer disk on chip code in drivers/mtd/nand; someone with access to hardware and sufficient time and motivation can try to get that working, but for now disk on chip is not supported. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand: ndfc: Remove unnecessary #ifdef'sStefan Roese2009-07-16-6/+0
| | | | | | | | | | | | | | | | | | Now that the 4xx NAND driver ndfc is moved to the common NAND driver directory we don't need this #ifdef's anymore. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand/ppc4xx: Move PPC4xx NAND driver to common NAND driver directoryStefan Roese2009-07-16-0/+224
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * nand: fixed failed reads on corrected ECC errors in nand_util.cValeriy Glushkov2009-07-16-5/+5
| | | | | | | | | | | | Signed-off-by: Valeriy Glushkov <gvv@lstec.com> Signed-off-by: Paulraj, Sandeep <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * Typo fix: use CONFIG_SOC_DM644X, not CONFIG_SOC_DM646.David Brownell2009-07-16-1/+1
| | | | | | | | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | stdio/device: rework function naming conventionJean-Christophe PLAGNIOL-VILLARD2009-07-18-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2009-07-17-129/+178
|\ \
| * | Added support for splash screen positioningMatthias Weisser2009-07-17-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support splash image positioning by adding an additional variable "splashpos" to the environment. Please see README for details. Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | video: mb862xx: replace printf with putsAnatolij Gustschin2009-07-17-10/+10
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | video: mb862xx: use macros instead of magic numbersAnatolij Gustschin2009-07-17-46/+50
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | video: mb862xx: fix coding style and remove dead codeAnatolij Gustschin2009-07-17-103/+114
| |/ | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | sata: namespace curr_device variableMike Frysinger2009-07-17-3/+3
|/ | | | | | | | | | | The curr_device variable really should be namespaced with a "sata_" prefix since it is only used by the sata code. It also avoids random conflicts with other pieces of code (like cmd_mmc): common/libcommon.a(cmd_sata.o):(.data.curr_device+0x0): multiple definition of `curr_device' common/libcommon.a(cmd_mmc.o):(.data.curr_device+0x0): first defined here Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* fsl_esdhc: Add device tree fixupsAnton Vorontsov2009-07-16-0/+19
| | | | | | | | | | | This patch implements fdt_fixup_esdhc() function that is used to fixup the device tree. The function adds status = "disabled" propery if esdhc pins muxed away, otherwise it fixups clock-frequency for esdhc nodes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mtd: cfi - if defined, use MAX_FLASH_BANKS_DETECT for static declarationsKim Phillips2009-07-16-2/+9
| | | | | | | | | | | | | a.k.a cfi_mtd.c does as cfi_flash.c does. This also prevents the TQM834x build from doing a: cfi_mtd.c:36: error: variably modified 'cfi_mtd_info' at file scope cfi_mtd.c:37: error: variably modified 'cfi_mtd_names' at file scope using gcc 4.4. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-13-2/+87
|\
| * at91: Introduction of at91sam9g45 SOC.Sedji Gaouaou2009-07-12-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| * nand: Add Marvell Kirkwood NAND driverPrafulla Wadaskar2009-07-08-0/+83
| | | | | | | | | | | | | | This patch adds a NAND driver for the Marvell Kirkwood SoC's Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2009-07-13-3/+8
|\ \
| * | issue write command to base for JEDEC flashPo-Yu Chuang2009-07-13-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For JEDEC flash, we should issue word programming command relative to base address rather than sector base address. Original source makes SST Flash fails to program sectors which are not on the 0x10000 boundaries. e.g. SST39LF040 uses addr1=0x5555 and addr2=0x2AAA, however, each sector is 0x1000 bytes. Thus, if we issue command to "sector base (0x41000) + offset(0x5555)", it sends to 0x46555 and the chip fails to recognize that address. This patch is tested with SST39LF040. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | usb: Fix compiler warning with gcc4.4Kumar Gala2009-07-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | ehci-hcd.c: In function 'ehci_submit_root': ehci-hcd.c:719: warning: value computed is not used ehci-hcd.c:748: warning: value computed is not used Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | | usb: add Marvell Kirkwood ehci host controller driverPrafulla Wadaskar2009-07-09-0/+109
| | | | | | | | | | | | | | | | | | | | | This driver is tested on Sheevaplug platform Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | | mpc8xxx: USB: fix: access of ehci struct elementsVivek Mahajan2009-07-09-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the access to the 'ehci' struct elements which should have been taken care off in 4ef01010aa4799c759d75e67007fdd3a38c88c8a Sorry about that. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | | usb: musb: add timeout via CONFIG_MUSB_TIMEOUTBryan Wu2009-07-09-0/+35
| | | | | | | | | | | | | | | | | | Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | | usb: musb: drop old musb read/write prototypesMike Frysinger2009-07-09-6/+0
|/ / | | | | | | | | | | | | These functions are no longer defined, so remove their prototypes. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | fsl_elbc_nand: redirect the pointer of bbt pattern to RAMMingkai Hu2009-07-07-0/+4
| | | | | | | | | | | | | | | | | | | | | | The bbt descriptors contains the pointer to the bbt pattern which are statically initialized memory struct. When relocated to RAM, these pointers will continue point to NOR flash(or L2 SRAM, or other boot device). If the contents of NOR flash changed or L2 SRAM disabled, it'll hang the system. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Bug-fix in drivers mtd nand Makefilekevin.morfitt@fearnside-systems.co.uk2009-07-07-1/+1
| | | | | | | | | | | | | | | | The S3C2410 NAND driver source file is included in the makefile instead of the object file. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | mtd: nand: use loff_t for offsetJean-Christophe PLAGNIOL-VILLARD2009-07-07-10/+10
| | | | | | | | | | | | | | | | nand_util currently uses size_t which is arch dependent and not always a unsigned long. Now use loff_t, as does the linux mtd layer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | mtd: nand: new base driver for memory mapped nand devicesMike Frysinger2009-07-07-0/+54
| | | | | | | | | | | | | | | | | | The BF537-STAMP Blackfin board had a driver for working with NAND devices that are simply memory mapped. Since there is nothing Blackfin specific about this, generalize the driver a bit so that everyone can leverage it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | davinci_nand chipselect/init cleanupDavid Brownell2009-07-07-20/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update chipselect handling in davinci_nand.c so that it can handle 2 GByte chips the same way Linux does: as one device, even though it has two halves with independent chip selects. For such chips the "nand info" command reports: Device 0: 2x nand0, sector size 128 KiB Switch to use the default chipselect function unless the board really needs its own. The logic for the Sonata board moves out of the driver into board-specific code. (Which doesn't affect current build breakage if its NAND support is enabled...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC)David Brownell2009-07-07-205/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove CONFIG_SYS_DAVINCI_BROKEN_ECC option. It's not just nasty; it's also unused by any current boards, and doesn't even match the main U-Boot distributions from TI (which use soft ECC, or 4-bit ECC on newer chips that support it). DaVinci GIT kernels since 2.6.24, and mainline Linux since 2.6.30, match non-BROKEN code paths for 1-bit HW ECC. The BROKEN code paths do seem to partially match what MontaVista/TI kernels (4.0/2.6.10, and 5.0/2.6.18) do ... but only for small pages. Large page support is really broken (and it's unclear just what software it was trying to match!), and the ECC layout was making three more bytes available for use by filesystem (or whatever) code. Since this option itself seems broken, remove it. Add a comment about the MV/TI compat issue, and the most straightforward way to address it (should someone really need to solve it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | davinci_nand: cleanup I (minor)David Brownell2009-07-07-33/+22
|/ | | | | | | | | | | | | | | | | | | | | | | | Minor cleanup for DaVinci NAND code: - Use I/O addresses from nand_chip; CONFIG_SYS_NAND_BASE won't be defined when there are multiple chipselect lines in use (as with common 2 GByte chips). - Cleanup handling of EMIF control registers * Only need one pointer pointing to them * Remove incorrect and unused struct supersetting them - Use the standard waitfunc; we don't need a custom version - Partial legacy cleanup: * Don't initialize every board like it's a DM6446 EVM * #ifdef a bit more code for BROKEN_ECC Sanity checked with small page NAND on dm355 and dm6446 EVMs; and large page on dm355 EVM (packaged as two devices, not one). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2009-07-07-2/+5
|\
| * Atmel LCD driver GUARDTIME fixMark Jackson2009-06-30-2/+5
| | | | | | | | | | | | | | | | | | | | This patch allows the guard time parameter to be set in the Atmel LCDC driver. By default, the previous value of 1 is used, unless the setting is defined elsewhere. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* | Coding style cleanup; update CHANGELOGWolfgang Denk2009-07-07-2/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-07-10/+215
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | net: merge bugfix: Marvell Kirkwood gigabit ethernet driverPrafulla Wadaskar2009-07-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch looks okay on u-boot-net.git/next branch but when it was merged to u-boot.git/master the last line is missing Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
| * | ARM DaVinci: EMIF settingsThomas Lange2009-07-06-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND module should not modify EMIF registers unrelated to CS2 that is used for NAND, i.e. do not modify EWAIT config register or registers for other Chip Selects. Without this patch, EMIF configurations made in board_init() will be invalidated. Signed-off-by: Thomas Lange <thomas@corelatus.se>
| * | arm: Kirkwood: Basic SOCs supportPrafulla Wadaskar2009-07-06-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kirkwood family controllers are highly integrated SOCs based on Feroceon-88FR131/Sheeva-88SV131/arm926ejs cpu core. SOC versions supported:- 1) 88F6281-A0 define CONFIG_KW88F6281_A0 2) 88F6192-A0 define CONFIG_KW88F6192_A0 Other supported features:- 1) get_random_hex() fucntion 2) PCI Express port initialization 3) NS16550 driver support Contributors: Yotam Admon <yotam@marvell.com> Michael Blostein <michaelbl@marvell.com Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Acked-by: Stefan Rose <sr@denx.de> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | spi: Add Marvell Kirkwood SPI driverPrafulla Wadaskar2009-06-26-0/+186
| | | | | | | | | | | | | | | | | | This patch adds a SPI driver for the Marvell Kirkwood SoC's. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | serial_mx31: allow it to work with mx27 too and rename to serial_mxcIlya Yanok2009-06-21-1/+22
| |/ | | | | | | | | | | | | UART hardware on i.MX27 is the same as on the i.MX31 so we just need to provide the driver with correct address of the registers. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2009-07-07-0/+110
|\ \
| * | mpc52xx: Add SPI driver.Grzegorz Bernacki2009-06-14-0/+110
| | | | | | | | | | | | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk2009-07-07-1/+1
|\ \ \
| * | | UBI: Fix build problem noticed on Apollon (arm/testing repo)Stefan Roese2009-07-07-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | This patch fixes a build problem noticed on Apollon by using mtd_dev_by_eb() instead of "/" as done in the Linux UBI version. So this brings the U-Boot UBI version more in sync with the Linux version again. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-07-07-16/+57
|\ \ \
| * | | sf: Macronix additional chips supportedPrafulla Wadaskar2009-07-06-12/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | new chips supported:- MX25L1605D, MX25L3205D, MX25L6405D, MX25L12855E out of which MX25L6405D and MX25L12855E tested on Kirkwood platforms Modified the Macronix flash support to use 2 bytes of device id instead of 1 This was required to support MX25L12855E Signed-off-by: Piyush Shah <spiyush@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-17 16:58:28 +0000