summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* cpsw: add driver for cpsw ethernet deviceCyril Chemparathy2012-09-01-0/+992
| | | | | | | | | | | | | | | | | | | CPSW is an on-chip ethernet switch that is found on various SoCs from Texas Instruments. This patch adds a simple driver (based on the Linux driver) for this hardware module. This patch also adds support to clean and flush dcache during packet send and receive. Changes by Sandhya: Added support to clean and flush dcache during packet send/receive and added timeouts. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Chandan Nath <chandan.nath@ti.com> Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana@ti.com> [Ilya: Cleaned cache handling, some style cleanup, some small fixes, use of internal RAM for descriptors] Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* serial/ns16550: ns16550 has a different register layout on SOC_DA8XXMikhail Kshevetskiy2012-09-01-1/+1
| | | | | | | | | | also fix NS16550_init() as we need 16x divider Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Acked-by: Christian Riesch <christian.riesch@omicron.at> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Sughosh Ganu <urwithsughosh@gmail.com> Tested-by: Sughosh Ganu <urwithsughosh@gmail.com>
* da850/omap-l138: Add support to read u-boot image from MMC/SDLad, Prabhakar2012-09-01-0/+66
| | | | | | | | | | | | | | | DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will be in SPI flash and U-Boot image will be in MMC/SD card. SPL will do the low level initialization and then loads the u-boot image from MMC/SD card. Define CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138 configuration file to enable this feature. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* omap24xx_i2c: add 2-byte address supportIlya Yanok2012-09-01-32/+26
| | | | | | | | | | | | | | | Various devices like EEPROMs require 2-byte address support to be properly accessed. This patch adds this support for OMAP2/3/4 I2C controller driver. I've tested it with EEPROM (16 bit address) and TPS65217 chip (8 bit address) on TI Beaglebone board. Unfortunately I don't have access to any compatible hardware with 16bit data register so I can't test if those #ifdef clauses really work. CC: Tom Rini <trini@ti.com> Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* Consolidate bootcount code into drivers/bootcountStefan Roese2012-09-01-0/+343
| | | | | | | | | | | | | | | | | | | This patch moves all bootcount implementations into a common directory: drivers/bootcount. The generic bootcount driver is now usable not only by powerpc platforms, but others as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk2012-09-01-13/+40
|\ | | | | | | | | | | | | | | | | | | | | | | | | * 'sf' of git://git.denx.de/u-boot-blackfin: sf: spansion: Add support for S25FL256S sf: winbond: fix page_size sf: stmicro: add support for N25Q128A sf: stmicro: add support N25Q128 parts sf: stmicro: support JEDEC standard two-byte signature sf: winbond: add W25Q32 cmd_spi: remove superfluous semicolon Signed-off-by: Wolfgang Denk <wd@denx.de>
| * sf: spansion: Add support for S25FL256SMichal Simek2012-08-14-0/+7
| | | | | | | | | | | | | | Add support for Spansion S25FL256S SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: fix page_sizeStephen Warren2012-08-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit a4ed3b6 "sf: inline data constants" modified winbond.c's page_size from 256 to 4096. This prevents either/both of "sf write" writing the correct data, or "sf read" from reading the correct data back. This allows U-Boot running on Compulab Tegra to upgrade itself. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support for N25Q128AMichal Simek2012-08-10-0/+6
| | | | | | | | | | | | | | Add support for Numonyx N25Q128A SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support N25Q128 partsStephan Linz2012-08-09-0/+6
| | | | | | | | | | | | | | | | | | Adds support for Numonyx's N25Q128 SPI flash. These devices are used on (among others) Avnet Spartan-6 LX9 micro-evaluation boards. Tested with "sf" commands and CONFIG_ENV_IS_IN_SPI_FLASH. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: support JEDEC standard two-byte signatureStephan Linz2012-08-09-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are more than the M25Pxx serial flashs that can be used with the stmicro driver, for example: the M25PXxx or N25Qxx serie. All these chips have burned in the original stmicro manufacture id 0x20 together with a standard two-byte signature. In preperation to support all these chips the stmicro driver have to decode the full two-byte signature. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: add W25Q32Rajeshwari Shinde2012-08-09-0/+5
| | | | | | | | | | | | | | | | | | SMDK EVT1 has a different Winbond part, added its part details to the SPI flash table. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashsHolger Brunck2012-08-13-22/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Philippe De Muyter <phdm@macqel.be> cc: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: add support for Spansion flash PPB sector protectionAnatolij Gustschin2012-08-13-0/+52
| | | | | | | | | | | | | | | | | | | | Erasing flash sectors protected with persistent protection bit (PPB) mechanism on Spansion flash chips doesn't work. Add sector protection status checking and sector lock and unlock commands to fix this. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Add support for DS1388.Kenth Eriksson2012-08-10-0/+27
|/ | | | | | | | | | Support for DS1388 is added by extending the DS1337 driver. DS1388 is similar to DS1337. The time registers are offset by 1 (due to support for hundreds of seconds), and there is no century bit. The configuration and trickle charge registers are also different. Tested on hardware with Freescale P2010 and DS1388. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com>
* sh: Add support pin function control using GPIONobuhiro Iwamatsu2012-08-08-0/+630
| | | | | | | | Renesas SH and R-Mobile set up device using PFC. This provide the framework. Most codes were brought from linux kernel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support Renesas R8A7740Hideyuki Sano2012-08-08-7/+14
| | | | | | | The serial device of R8A7740 has the same structure as SH7372 of SH, etc. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support Renesas SH73A0Nobuhiro Iwamatsu2012-08-08-7/+14
| | | | | | | The serial device of SH73A0 has the same structure as SH7372 of SH, etc. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* spi: Fix merge conflicts - MakefileMichal Simek2012-08-07-1/+0
| | | | | | | | | | | | | | | The patch "spi: tegra2: rename tegra2_spi.* to tegra_spi.*" (sha1: edffa63d3d6e76991998789f9fcbaa483731ca65) renamed tegra2_spi.c to tegra_spi.c and the patch "Merge branch 'master' of git://git.denx.de/u-boot-microblaze" (sha1: d978780b2e676c005460cd561f4f15b5220bdf49) has wrongly resolved confict. This patch fix it. Signed-off-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2012-07-31-291/+442
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-i2c: km/common: remove printfs for i2c deblocking code CONFIG: SMDK5250: I2C: Enable I2C I2C: Add support for Multi channel I2C: Modify the I2C driver for EXYNOS5 I2C: Move struct s3c24x0_i2c to a common place. EXYNOS: PINMUX: Add pinmux support for I2C EXYNOS5: define EXYNOS5_I2C_SPACING EXYNOS: Add I2C base address. EXYNOS: CLK: Add i2c clock mx6qsabrelite: add i2c multi-bus support imx-common: add i2c.c for bus recovery support i.mx53: add definition for I2C3_BASE_ADDR i.mx: iomux-v3.c: move to imx-common directory i.mx: iomux-v3.h: move to imx-common include directory iomux-v3: remove include of mx6x_pins.h mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support mxc_i2c: add bus recovery support mxc_i2c: prep work for multiple busses support mxc_i2c: add i2c_regs argument to i2c_imx_stop mxc_i2c: add retries mxc_i2c: check for arbitration lost mxc_i2c: change slave addr if conflicts with destination. mxc_i2c: don't disable controller after every transaction mxc_i2c: place i2c_reset code inline mxc_i2c: place imx_start code inline mxc_i2c: remove redundant read mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state mxc_i2c.c: code i2c_probe as a 0 length i2c_write mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write mxc_i2c: create i2c_init_transfer mxc_i2c: clear i2sr before waiting for bit mxc_i2c: create tx_byte function mxc_i2c: remove ifdef of CONFIG_HARD_I2C mxc_i2c: fix i2c_imx_stop i2c: deblock i2c bus also if accessed before realocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * I2C: Add support for Multi channelRajeshwari Shinde2012-07-31-0/+27
| | | | | | | | | | | | | | | | This adds multiple i2c channel support for I2C. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * I2C: Modify the I2C driver for EXYNOS5Rajeshwari Shinde2012-07-31-77/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the S3C I2C driver to suppport EXYNOS5. The cahnges made to driver are as follows: - I2C base address is passed as a parameter to many functions to avoid multiple #ifdef - Channel initialisation is moved to a commom funation as it is required by i2c_init. - Hardcoding for I2CCON_ACKGEN removed. - Replaced printf with debug. - Checkpatch issues resolved. - Pinmux setting will be done in board/samsung/smdk5250/smdk5250.c to avoid repeated setting of gpio lines, as it have multi bus support. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * I2C: Move struct s3c24x0_i2c to a common place.Rajeshwari Shinde2012-07-31-0/+33
| | | | | | | | | | | | | | | | | | | | struct s3c24x0_i2c is being moved to common local header file so that the same can be used by s3c series and exynos series SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-1/+1
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS supportTroy Kisky2012-07-31-0/+17
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: add bus recovery supportTroy Kisky2012-07-31-0/+26
| | | | | | | | | | | | | | | | | | Add support for calling a function that will toggle the SCL line to return the bus to idle condition. The actual toggling function is added in a later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: prep work for multiple busses supportTroy Kisky2012-07-31-21/+104
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: add i2c_regs argument to i2c_imx_stopTroy Kisky2012-07-31-12/+7
| | | | | | | | | | | | | | This is prep work for CONFIG_I2C_MULTI_BUS. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: add retriesTroy Kisky2012-07-31-9/+27
| | | | | | | | | | | | | | Retry unexpected hardware errors. This will not retry a received NAK. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: check for arbitration lostTroy Kisky2012-07-31-0/+7
| | | | | | | | | | | | | | No need to continue waiting if arbitration lost. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: change slave addr if conflicts with destination.Troy Kisky2012-07-31-0/+2
| | | | | | | | | | | | | | The i2c controller cannot be both master and slave in the same transaction. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: don't disable controller after every transactionTroy Kisky2012-07-31-15/+13
| | | | | | | | | | | | | | This helps in a multiple bus master environment which is why I also added a wait for bus idle. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: place i2c_reset code inlineTroy Kisky2012-07-31-12/+3
| | | | | | | | | | | | | | | | imx_reset is only referenced once so move to that location. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: place imx_start code inlineTroy Kisky2012-07-31-33/+20
| | | | | | | | | | | | | | | | imx_start is only referenced once so move to that location. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: remove redundant readTroy Kisky2012-07-31-1/+0
| | | | | | | | | | | | | | | | wait_for_sr_state returns i2sr on success so no need to read again. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into ↵Troy Kisky2012-07-31-51/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_for_sr_state Not using udelay gives a more accurate timeout. The current implementation of udelay in imx-common does not seem to wait at all for a udelay(1). Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> ---- V2: Added WATCHDOG_RESET as suggested by Marek Vasut add error message when stop fails mxc_i2c: code i2c_probe as a 0 length i2c_write Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c.c: code i2c_probe as a 0 length i2c_writeTroy Kisky2012-07-31-17/+8
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_writeTroy Kisky2012-07-31-3/+7
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mxc_i2c: create i2c_init_transferTroy Kisky2012-07-31-26/+18
| | | | | | | | | | | | | | | | | | Initial code of i2c_read and i2c_write is identical, move to subroutine. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * mxc_i2c: clear i2sr before waiting for bitTroy Kisky2012-07-31-4/+5
| | | | | | | | | | | | | | | | | | | | | | Let's clear the sr register before waiting for bit to be set, instead of clearing it after hardware sets it. No real operational difference here, but allows combining of i2c_imx_trx_complete and i2c_imx_bus_busy in later patches. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: create tx_byte functionTroy Kisky2012-07-31-58/+24
| | | | | | | | | | | | | | | | Use tx_byte function instead of having 3 copies of the code. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: remove ifdef of CONFIG_HARD_I2CTroy Kisky2012-07-31-5/+1
| | | | | | | | | | | | | | | | This is always selected when CONFIG_I2C_MXC is selected, so it adds no value. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| * mxc_i2c: fix i2c_imx_stopTroy Kisky2012-07-31-1/+1
| | | | | | | | | | | | | | | | | | | | Instead of clearing 2 bits, all the other bits were set because '|=' was used instead of '&='. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2012-07-31-0/+351
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Wire up SPI driver spi: microblaze: Adds driver for Xilinx SPI controller microblaze: intc: Clear interrupt code microblaze: Call serial multi initialization microblaze: Move __udelay implementation microblaze: Remove extern from board.c microblaze: Wire up dts configuration fdt: Add board specific dts inclusion microblaze: Move individual board linker scripts to common script in cpu tree. microblaze: Add gpio.h microblaze: Add missing undefs for UBI and UBIFS microblaze: Expand and correct configuration comments microblaze: Enable ubi support microblaze: Avoid compile error on systems without cfi flash microblaze: Remove wrong define CONFIG_SYS_FLASH_PROTECTION Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | spi: microblaze: Adds driver for Xilinx SPI controllerStephan Linz2012-07-31-0/+350
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an improved version of the driver patch original submitted by Graeme Smecher <graeme.smecher@mail.mcgill.ca> The changes are: - remove hard coded Xilinx BSP defines (XPAR_SPI_*) and use CONFIG_SYS_SPI_BASE from config.h instead - add extensive register struct definitions - remove offset calculation for register access and use the new register struct instead - move default SPI controller configuration from spi_setup_slave() to spi_claim_bus() - add spi_set_speed() - insert SPI controller deactivation in spi_release_bus() - protect while loops in spi_xfer() with counter / timeouts - support SPI mode flags: LSB_FIRST, CPHA, CPOL, LOOP Come from: http://patchwork.ozlabs.org/patch/71797/ Signed-off-by: Stephan Linz <linz@li-pro.net> Tested-by: Michal Simek <monstr@monstr.eu>
* | | sf: stmicro: add geometrical info for N25Q256 from MicronJérôme Carretero2012-04-08-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Note: because 4-byte addressing is not supported yet, at the moment only the first 16MiB of the device are available. Signed-off-by: Jérôme Carretero <cJ@zougloub.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | sf: unify status register writing (and thus block unlocking)Mike Frysinger2012-03-04-62/+32
| | | | | | | | | | | | | | | | | | | | | | | | The only two drivers to write the status register do it in the same way, so unify the implementations. This also makes the block unlock logic the same. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | sf: sst: inline duplicate write enable helper funcsMike Frysinger2012-03-04-22/+4
| | | | | | | | | | | | | | | | | | | | | The local sst enable/disable write funcs don't really add anything over the common API, so just inline the common calls directly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | sf: eon: drop duplicate idMike Frysinger2012-03-04-5/+0
| | | | | | | | | | | | | | | | | | Looks like Shaohui Xie's patch got merged twice. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | sf: unify erase commandsMike Frysinger2012-03-04-71/+18
| | | | | | | | | | | | | | | | | | | | | | | | Analysis of the flash drivers shows that they all use 0x20 if the erase size is 4KiB, or 0xd8 if it's larger. So with this info in hand, we can unify all the erase functionality in one place. Signed-off-by: Mike Frysinger <vapier@gentoo.org>