summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDTAmar2013-06-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables and initialises DWMMC for SMDK5250. Supports both FDT and non-FDT. This patch creates a new file 'exynos5-dt.c' meant for FDT support. exynos5-dt.c: This file shall contain all code which supports FDT. Any addition of FDT support for any module needs to be added in this file. smdk5250.c: This file shall contain the code which supports non-FDT. version. Any addition of non-FDT support for any module needs to be added in this file. May be, the file smdk5250.c can be removed in near future when non-FDT is not required. The Makefile is updated to compile only one of the files exynos5-dt.c / smdk5250.c based on FDT configuration. NOTE: Please note that all additions corresponding to FDT need to be added into the file exynos5-dt.c. At same time if non-FDT support is required then add the corresponding updations into smdk5250.c. Signed-off-by: Amar <amarendra.xt@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: DWMMC: Added FDT support for DWMMCAmar2013-06-13-10/+117
| | | | | | | | | | | This patch adds FDT support for DWMMC, by reading the DWMMC node data from the device tree and initialising DWMMC channels as per data obtained from the node. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Amar <amarendra.xt@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* DWMMC: Initialise dwmci and resolve EMMC read write issuesAmar2013-06-13-9/+12
| | | | | | | | | | | | This patch enumerates dwmci and set auto stop command during dwmci initialisation. EMMC read/write is not happening in current implementation due to improper fifo size computation. Hence modified the fifo size computation to resolve EMMC read write issues. Signed-off-by: Amar <amarendra.xt@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Exynos: uart: s5p: enabling the uart tx/rx fifoAkshay Saraswat2013-05-21-4/+9
| | | | | | | | | | | | This patch enables the uart tx/rx fifo. Now that fifo is enabled, the uart read/write functions are modfied to check the UFSTAT register for fifo status instead of UTRSTAT (as required with fifo's enabled). Tested by booting linux kernel. Before enabling tx/rx fifo "Uncompressing linux" message is garbled and after enabling it is proper. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SF: Add driver for Gigabyte device GD25LQ and GD25Q64BRajeshwari Shinde2013-05-20-0/+86
| | | | | | | | | | This patch adds driver for the gigabyte devices GD25LQ and GD25Q64B required for Snow Board. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* mmc: atmel_mci: add mmc card supportBo Shen2013-05-12-1/+4
| | | | | | | add mmc card support with atmel mci driver Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* mmc: atmel_mci: using IP version for different settingBo Shen2013-05-12-4/+38
| | | | | | | | | Using IP version for different setting - Higher version supports 8bit mode - Higher version bus width setting is different Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* spi: atmel_spi: using ip version to check whether has wdrbtBo Shen2013-05-12-4/+13
| | | | | | | | | | | Using IP version to check whether it has wdrbt bit in mode register Tested in at91sam9x5ek and at91sam9n12ek. Signed-off-by: Bo Shen <voice.shen@atmel.com> [fix warning about incompatible parameter] Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-110/+197
|\
| * palmas: use palmas_i2c_[read|write]_u8Nishanth Menon2013-05-10-24/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 21144298 (power: twl6035: add palmas PMIC support) introduced twl6035_i2c_[read|write]_u8 Then, commit dd23e59d (omap5: pbias ldo9 turn on) introduced palmas_[read|write]_u8 for precisely the same access function. TWL6035 belongs to the palmas family, so instead of having an twl6035 API, we could use an generic palmas API instead. To stay consistent with the function naming of twl4030,6030 accessors, we use palmas_i2c_[read|write]_u8 Cc: Balaji T K <balajitk@ti.com> Cc: Sricharan R <r.sricharan@ti.com> Reported-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
| * palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic functionNishanth Menon2013-05-10-2/+2
| | | | | | | | | | | | | | | | Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs, rename twl6035_mmc1_poweron_ldo by a more generic palmas_mmc1_poweron_ldo function. Signed-off-by: Nishanth Menon <nm@ti.com>
| * palmas: rename init_settings to an generic palmas initNishanth Menon2013-05-10-1/+1
| | | | | | | | | | | | | | Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs, rename twl6035_init_settings with an more generic palmas_init_settings Signed-off-by: Nishanth Menon <nm@ti.com>
| * twl6035: rename to palmasNishanth Menon2013-05-10-6/+6
| | | | | | | | | | | | | | | | | | | | | | TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs Rename twl6035 to palmas to allow reuse across multiple current and future platforms As part of this change, change the CONFIG_TWL6035_POWER to CONFIG_PALMAS_POWER and update usage of header file accordingly. Signed-off-by: Nishanth Menon <nm@ti.com>
| * twl6030: move twl6030 register access functions to common header fileNishanth Menon2013-05-10-11/+0
| | | | | | | | | | | | | | | | twl6030_i2c_[read|write]_u8 can be used else where to access multi-function device such as twl6030, so move the register access functions to the common twl6030.h header file. Signed-off-by: Nishanth Menon <nm@ti.com>
| * twl6030: twl6030_i2c_[read|write]_u8 prototype consistentNishanth Menon2013-05-10-34/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot standard i2c register access prototype is i2c_read(addr, reg, 1, &buf, 1) i2c_reg_write(u8 addr, u8 reg, u8 val) twl6030_i2c_read_u8(u8 addr, u8 *val, u8 reg) twl6030_i2c_write_u8(u8 addr, u8 val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl6030_i2c_read_u8(u8 addr, u8 reg, u8 *val) twl6030_i2c_write_u8(u8 addr, u8 reg, u8 val) Signed-off-by: Nishanth Menon <nm@ti.com>
| * twl4030: make twl4030_i2c_read_u8 prototype consistentNishanth Menon2013-05-10-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | u-boot standard i2c read prototype is i2c_read(addr, reg, 1, &buf, 1) twl4030_i2c_read_u8(u8 addr, u8 *val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl4030_i2c_read_u8(u8 addr, u8 reg, u8 *val) Signed-off-by: Nishanth Menon <nm@ti.com>
| * twl4030: make twl4030_i2c_write_u8 prototype consistentNishanth Menon2013-05-10-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | u-boot standard i2c register write prototype is i2c_reg_write(u8 addr, u8 reg, u8 val) twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val) Signed-off-by: Nishanth Menon <nm@ti.com>
| * phy: add support for ET1011C physMatt Porter2013-05-10-0/+114
| | | | | | | | | | | | | | | | | | | | | | | | Adds an ET1011C PHY driver which is derived from the Linux kernel PHY driver (drivers/net/phy/et1011c.c) from the v3.9-rc2 tag. Note that an errata workaround config option is implemented to allow for TX_CLK to be enabled even when gigabit mode is negotiated. This workaround is used on the PG1.0 TI814X EVM. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * cpsw: add support for TI814x slave_regs differencesMatt Porter2013-05-10-0/+6
| | | | | | | | | | | | | | | | TI814x's version 1 CPSW has a different slave_regs layout. Add support for the differing registers. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* | Revert wrong removal of nand_init and nand_deselectAlbert ARIBAUD2013-05-11-0/+3
| | | | | | | | | | | | | | | | | | The manual resolution in commit ec7023db wrongly removed functions nand_init and nand_deselect from file drivers/mtd/nand/mxc_nand_spl.c. Revert this removal. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-83/+722
|\ \ | | | | | | | | | | | | | | | Conflicts: drivers/mtd/nand/mxc_nand_spl.c include/configs/m28evk.h
| * | arm: mxs: Add MXS LCDIF driverMarek Vasut2013-05-06-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic LCD driver for i.MX233 and i.MX28. This driver allows framebuffer console and framebuffer logo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * | imx: mx5: Remove legacy iomux supportBenoît Thébaudeau2013-05-05-73/+0
| | | | | | | | | | | | | | | | | | | | | | | | Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | nand: Add SPL_NAND support to mxc_nand_splMarek Vasut2013-05-05-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for generic NAND SPL via the SPL framework into the mxc_nand_spl driver. This is basically just a simple rename and publication of the already implemented functions. To avoid the bare-bones functions getting in the way of the NAND_SPL, build them only if CONFIG_SPL_FRAMEWORK is not defined. Also make sure the requested payload is aligned to full pages, otherwise this simple driver fails to load the last page. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Scott Wood <scottwood@freescale.com>
| * | Add mxc_ocotp driverBenoît Thébaudeau2013-04-28-0/+217
| | | | | | | | | | | | | | | | | | Add an mxc_ocotp driver for i.MX6. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * | Add fsl_iim driverBenoît Thébaudeau2013-04-28-0/+287
| | | | | | | | | | | | | | | | | | Add a fsl_iim driver common to i.MX and MPC. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * | mtd: mxs_nand: Add support for i.MX6Stefan Roese2013-04-22-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | dma: Add i.MX6 support to drivers/dma/apbh_dma.cStefan Roese2013-04-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This will be used by the i.MX6 NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: Move some header files from arch-mxs to imx-commonStefan Roese2013-04-22-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following headers are moved to a i.MX common location: - regs-common.h - regs-apbh.h - regs-bch.h - regs-gpmi.h - dma.h This way this header can be re-used also by other i.MX platforms. For example the i.MX6 which will need it for the upcoming NAND support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | | Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-11-31/+1420
|\ \ \
| * | | mtd: nand: add driver for diskonchip g4 nand flashMike Dunn2013-05-05-0/+1252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for the diskonchip G4 nand flash device. It is based on the driver from the linux kernel. This also includes a separate SPL driver. A separate SPL driver is used because the device operates in a different mode (reliable mode) when loading a boot image, and also because the storage format of the boot image is different from normal data (pages are stored redundantly). The SPL driver basically mimics how a typical IPL reads data from the device. The special operating mode and storage format are used to compensate for the fact that the IPL does not contain the BCH ecc decoding algorithm (due to size constraints). Although the u-boot SPL *could* use ecc, it operates like an IPL for the sake of simplicity and uniformity, since the IPL and SPL share the task of loading the u-boot image. As a side benefit, the SPL driver is very small. [port from linux kernel 3.4 commit 570469f3bde7f71cc1ece07a18d54a05b6a8775d] Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
| * | | pxa27x_udc: remove call to unimplemented set_GPIO_mode()Mike Dunn2013-05-05-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_USB_DEV_PULLUP_GPIO is defined, a link error occurs because the set_GPIO_mode() helper function is not implemented. This function doesn't do much except make the code a little more readable, so I just manually coded its equivalent and removed the prototype from the header file. It is invoked no where else in the code. While I was at it, I noticed that two other function prototypes in the same header file are also neither implemented nor invoked anywhere, so I removed them as well. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
| * | | pxa_lcd: make lcd_enable() a weak pointerMike Dunn2013-05-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make lcd_init() a weak pointer so that boards can overload it if necessary. The palmtreo680 board needs to wiggle some gpios and configure the pwm controller in order to get the lcd and its backlight working. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
| * | | pxa_lcd: add the ACX544AKN lcd deviceMike Dunn2013-05-05-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the definitions required to support the LCD device on the Palm Treo 680. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
| * | | fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speedZang Roy-R619112013-05-02-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some legacy RGMII phys don't have in band signaling for the speed information. so set the RGMII MAC mode according to the speed got from PHY. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reported-by: John Traill <john.traill@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | lib: consolidate hang()Andreas Bießmann2013-05-01-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete all occurrences of hang() and provide a generic function. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> [trini: Modify check around puts() in hang.c slightly] Signed-off-by: Tom Rini <trini@ti.com>
| * | | part/dev_desc: Add log2 of blocksize to block_dev_desc data structEgbert Eich2013-05-01-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | log2 of the device block size serves as the shift value used to calculate the block number to read in file systems when implementing avaiable block sizes. It is needed quite often in file systems thus it is pre-calculated and stored in the block device descriptor. Signed-off-by: Egbert Eich <eich@suse.com>
| * | | mmc: Define a constant for the maximum block sizeSimon Glass2013-05-01-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number 512 appears quite a bit in the mmc code. Add a constant for this so that it can be used here and in other parts of the code (e.g. SPL code which loads from mmc). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@google.com>
| * | | spl_mmc: cleanup variable typesPeter Korsgaard2013-05-01-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | block_read returns unsigned long, so it doesn't make sense to check for < 0. and neither does marking the header structure as const and then casting away the constness to load data into it. Also cleanup some unneeded pointer casting while we're at it. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Reviewed-by: Tom Rini <trini@ti.com>
| * | | watchdog: Add support for Xilinx Microblaze watchdogMichal Simek2013-04-30-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | fpga: Check device name against bitstream nameMichal Simek2013-05-06-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that wrong bitstream won't be loaded to current device. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | fpga: zynq: Add support for loading bitstreamMichal Simek2013-05-06-0/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devcfg device requires to load bitstream in binary format. But u-boot also has an option for loading bitstream in bit format. Let's handle both cases by zynqpl driver. Also add suport for loading partial bitstreams. The first driver version was done by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | fpga: Change the first parameter in fpga_loadbitstreamMichal Simek2013-05-06-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All fpga functions use devnum as int. Only fpga_loadbitstream is using it as unsinged long dev. This patch synchronize it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | cmd: fpga: Move fpga_loadbitstream to fpga.cMichal Simek2013-05-06-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In bitstream decoding you can directly check device which you want to load and in fpga.c are fpga_validate and fpga_dev_info functions which should be used for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | fpga: Fix debug message compilation errorMichal Simek2013-05-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FPGA in past was a bitfield where bits were use for vendor identification. This fix should be the part of this commit: "Improve configuration of FPGA subsystem" (sha1: 0133502e39ff89b67c26cb4015e0e7e8d9571184) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | | fpga: Clean coding styleMichal Simek2013-05-06-118/+98
| |_|/ |/| | | | | | | | | | | | | | | | | No functional changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | i2c: zynq: Add support for Xilinx ZynqMichal Simek2013-04-30-0/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support Xilinx Zynq i2c controller. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* | | mmc: Add support for Xilinx Zynq sdhci controllerMichal Simek2013-04-30-0/+41
| | | | | | | | | | | | | | | | | | | | | Add support for SD, MMC and eMMC card on Xilinx Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | net: gem: Add support for phy autodetectionMichal Simek2013-04-30-0/+51
| | | | | | | | | | | | | | | | | | | | | Autodetect phy if phyaddress is setup to -1. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* | | net: gem: Preserve clk on emio interfaceDavid Andrey2013-04-30-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid overwriting GEMx_RCLK_CTRL and GEMx_CLK_CTRL if the Ethernet interface is connect on EMIO Do not enable emio for this standard board configuration for now. Signed-off-by: David Andrey <david.andrey@netmodule.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-11-05 06:44:56 +0000