summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* phy: smsc: LAN8710/8720 are not Gbit PHYsFabio Estevam2013-08-19-1/+1
| | | | | | | | LAN8710/8720 are 10/100 Mbps PHYs, so fix the '.features' field. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* serial: arm_dcc: Convert to use default_serial_putsAxel Lin2013-08-19-7/+1
| | | | | | | | Use default_serial_puts() instead of its own implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'master' of git://88.191.163.10/u-boot-armTom Rini2013-08-18-24/+359
|\ | | | | | | | | | | | | | | | | | | Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini <trini@ti.com>
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-08-17-4/+5
| |\
| | * Merge git://git.denx.de/u-boot-armStefano Babic2013-07-31-9255/+2352
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | mxc_ipuv3: fix memory alignment of framebufferEric Nelson2013-07-29-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | The frame-buffer on i.MX boards needs to be aligned for DMA. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | mxc_gpio: Correct the GPIO handling in gpio_direction_output()Dirk Behme2013-07-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the direction and an output value should be done by First, set the desired output value. Then, switch to output. If this is done in the inverse order, like at the moment, there can be a glitch on the GPIO line while switching first the old output value and aftwards the new one. Fix this by inverting the order of the direction/set_value calls. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | Prepare for TI816X : reuse existing code from TI814XTENART Antoine2013-08-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
| * | | ARM: AM43xx: Add build supportLokesh Vutla2013-08-15-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | | musb: Disable extra printsLokesh Vutla2013-08-15-12/+8
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | There are many musb prints in SPL and U-Boot log. These prints are required only during musb debug. So replacing printk with pr_debug in musb_core. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
| * | gpio: tca642x: Add the tca642x gpio expander driverDan Murphy2013-07-30-0/+334
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the tca642x gpio expander driver Datasheet: http://www.ti.com/product/tca6424a Signed-off-by: Dan Murphy <dmurphy@ti.com>
| * | net, phy, cpsw: fix gigabit register accessHeiko Schocher2013-07-30-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | accessing a lan9303 switch with the cpsw driver results in wrong speed detection, as the switch sets the BMSR_ERCAP in BMSR register, and follow read of the MII_STAT1000 register fails, as the switch does not support it. Current code did not check, if a phy_read() fails ... fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
| * | drivers: net: cpsw: Enable statistics for all portMugunthan V N2013-07-26-0/+1
| | | | | | | | | | | | | | | | | | Enable hardware statistics for all ports, enabling only to host port is useless Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| * | drivers: net: cpsw: remove hard coding bd ram for cpswMugunthan V N2013-07-26-3/+1
| | | | | | | | | | | | | | | | | | | | | BD ram address may vary in various SOC, so removing the hardcoding and passing the same information through platform data Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| * | Merge branch 'u-boot/master' into u-boot-arm/masterAlbert ARIBAUD2013-07-25-9249/+2009
| |\ \
| * | | net: calxedaxgmac: enable rx cut-thruRob Herring2013-07-25-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | There is no reason to wait for the entire frame to start DMA on receive, so enable rx cut-thru for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | | gpio: pca953x: Use ARRAY_SIZE instead of reinventing itAxel Lin2013-08-16-4/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* | | tegra: Avoid using I2C prior to relocationSimon Glass2013-08-13-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra recently moved to the new I2C framework, which sets up I2C prior to relocation, and prior to calling i2c_init_board(). This causes a crash on Tegra boards. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'dcc' of git://www.denx.de/git/u-boot-microblazeTom Rini2013-08-13-18/+25
|\ \ \
| * | | serial: arm_dcc: Register with serial coreJagannadha Sutradharudu Teki2013-08-13-6/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Register arm_dcc with drivers/serial/serial.c Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | serial: arm_dcc: Remove stdio structure supportJagannadha Sutradharudu Teki2013-08-13-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed stdio structure ops support on arm_dcc driver, and need to register with serial core so-that it can access like remianing serial drivers. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2013-08-13-6/+16
|\ \ \ \
| * | | | powerpc/pcie: add PCIe version 3.x supportZang Roy-R619112013-08-09-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240 PCIe IP is version 3.0 and has some update comparing previous QorIQ products. 1. Move Freescale specific register define to arch/powerpc/include/asm/fsl_pci.h and update the register offset define for T4240. 2. add the status/control register define use status/control register to judge the link status 3. The original code uses 'Programming Interface' field to judge if PCIE is EP or RC mode, however, T4240 does not support this functionality. According to PCIE specification, 'Header Type' offset 0x0e is used to indicate header type, so for PCIE controller, the patch changes code to use 'Header Type' field to identify if the PCIE is RC or EP mode. This patch fixes the PCIe card link up issue on T4240QDS. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | drivers/fm: Fix compiling error if FW location is not definedYork Sun2013-08-09-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FMAN firmware can be in NOR flash, NAND flash, SPI flash, MMC or even remote. In case none of them is defined, set it to null. Signed-off-by: York Sun <yorksun@freescale.com>
* | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-videoTom Rini2013-08-12-122/+757
|\ \ \ \ \ | |_|/ / / |/| | | |
| * | | | exynos: video: change mipi dsi write function parameters correctlyDonghwa Lee2013-08-12-62/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch have changed mipi dsi write functions' parameters correctly so that type cast operations were removed. And mipi dsi payload is composed with array of panel commands to improve readability. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
| * | | | video: Encapsulate font in video_font_data.hMarek Vasut2013-08-12-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves all the font configuration values into video_font_data.h so they are all in the right place with the font. The video_font.h now only includes video_font_data.h and will allow us to select and include different font once more fonts are added. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [agust: fixed build warning for mcc200] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | | video: add an option to skip cfb console initHeiko Schocher2013-08-10-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add an option to skip cfb console init for boards who want to show a logo, but not use the cfb console. This is needed for the siemens boards, which have a bmp bootlogo, but do not need the cfb console. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [agust: use '__weak int board_cfb_skip(void)'] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | | video, da8xx-fb: show fb addr in bdinfoHeiko Schocher2013-08-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | without this patch the bdinfo command shows: U-Boot# bd arch_number = 0x000010DC [...] sp start = 0x8EF32F20 FB base = 0x00000000 with this patch it shows the address where the framebuffer for this video driver start: arch_number = 0x000010DC [...] sp start = 0x8EF32F20 FB base = 0x8EF3C788 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * | | | video, da8xx-fb: changes for am335x usageHeiko Schocher2013-08-10-57/+282
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to use this driver also on am335x based boards, the following changes are made: - struct lcd_ctrl_config lcd_cfg is now configurable through board code - controller base is configurable through define DA8XX_LCD_CNTL_BASE. To be compatible with older da8xx based boards: If this define is missing, the DAVINCI_LCD_CNTL_BASE is used - Determine LCD IP Version, and make the driver working on lcd revision register values: Version 1: 0x4C100102 Version 2: 0x4F200800 0x4F201000 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * | | | video, da8xx: move da8xx-fb.h to drivers/videoHeiko Schocher2013-08-10-1/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the da8xx-fb driver works also on am335x boards. So move the da8xx-fb.h file from arch/arm/include/asm/arch-davinci to drivers/video, so this driver can used from am335x based boards. Also add WVGA panel_type. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * | | | video: add L5F31188 TFT-LCD panel driverHyungwon Hwang2013-08-10-0/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is u-boot driver for L5F31188 panel. I tested it in the board based on MIPI DSI with EXYNOS4 series, and it worked well. Changes in V2: - Replaced license header by SPDX-License-Identifier. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Donghwa Lee <dw09.lee@samsung.com> [agust: sort Makefile entry alphabetically] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | | video: Fix cfb_console for 4-bit wide fontMarek Vasut2013-08-10-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cfb_console can't handle 4-bit wide font properly, since with 4-bit wide font, all 8 bits are drawn. Unbreak the video_drawchars() function to correctly render 4-bits only on such fonts. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
| * | | | video: Implement continuous screen refresh for SmartLCD into mxsfbMarek Vasut2013-08-09-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LCDIF interface doesn't give us any means to do continuous refresh when driving a SmartLCD. To work this around, we produce a special circular DMA descriptor, which only writes the HW_LCDIF_CTRL0 register and sets the RUN bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * | | | video: Add System-Mode configuration hook into mxsfbMarek Vasut2013-08-09-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hook that allow configuring SmartLCD attached the MXS LCDIF controller operating in System-Mode. This hook can be overriden by a platform-specific SmartLCD programming routine, which writes the SmartLCD specific values into it's registers. Also, this patch makes sure the SYNC signals are off for the SmartLCD case. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * | | | video: Allocate the MXSFB framebuffer alignedMarek Vasut2013-08-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate the framebuffer aligned so it can be flushed and the flush_dcache_range() function won't complain. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * | | | dma: apbh: Add special circular mode for LCDMarek Vasut2013-08-09-0/+22
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add special function that executes a specially crafted circular DMA descriptor. The function doesn't wait for the descriptor to finish the transfer, since the descritor never finishes. This is useful when operating a SmartLCD through the LCDIF interface, as the LCDIF does not give us any means to have continuous refresh of the SmartLCD. Instead, the RUN bit in the LCDIF CTRL register must be triggered manually. This can be worked around by starting an DMA transfer which continuously sets the RUN bit. This function allows starting exactly such transfer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* | | | Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblazeTom Rini2013-08-12-1/+5
|\ \ \ \
| * | | | fpga: zynqpl: Clear loopback mode during device initSoren Brinkmann2013-08-12-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some versions of the Zynq first stage boot loader enable PCAP loopback during boot regardless of whether or not the boot image includes PL configuration. This behavior only appears in certain boot modes (notably QSPI boot). Attempting to configure the PL with the loopback bit set will result in timeouts and will prevent successful configuration. In order to avoid this problem, and to avoid dependency on the version of the FSBL used to boot the system, ensure that the loopback enable bit is cleared when loading the driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | fpga: zynqpl: Add support for zc7100 device.Michal Simek2013-08-12-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for zc7100 device. - FPGA programming on few of the SOC(zc7100) takes more than 1sec, hence increased the program time by 4sec to sync' all soc's. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | sf: sst: Add support for SST25WF080Jagannadha Sutradharudu Teki2013-08-07-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SST25WF080 SPI flash. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | spi: Add zynq spi controller driverJagannadha Sutradharudu Teki2013-08-07-0/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zynq spi controller driver supports 2 buses and 3 chipselects on each bus. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | sf: Fix code cleanupsJagannadha Sutradharudu Teki2013-08-07-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - CHECK: Alignment should match open parenthesis - trailing whitespace Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | | sf: Fix code cleanupJagannadha Sutradharudu Teki2013-08-06-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - line over 80 characters. - CHECK: Alignment should match open parenthesis Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | | sf: stmicro: Fix code cleanupJagannadha Sutradharudu Teki2013-08-06-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - line over 80 characters - foo * bar -> foo *bar - removed unnecessary for single statement blocks. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | | sf: sst: Fix code cleanupJagannadha Sutradharudu Teki2013-08-06-12/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - line over 80 characters - add spaces - add tabs Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | | sf: eon|spansion|ramtron: Fix code cleanupJagannadha Sutradharudu Teki2013-08-06-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - line over 80 characters - insert the expression in same line Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* | | | spi: mpc8xxx_spi: Use DIV_ROUND_UP instead of open-codedAxel Lin2013-08-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use DIV_ROUND_UP to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com>
* | | | spi: fsl_espi: Use DIV_ROUND_UP instead of open-codedAxel Lin2013-08-06-4/+2
|/ / / | | | | | | | | | | | | | | | Use DIV_ROUND_UP to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com>
* | | i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEEDMarek Vasut2013-08-03-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case only the CONFIG_SYS_I2C_SPEED is set in configuration file, the CONFIG_SYS_I2C_SOFT_SPEED is defined as CONFIG_SYS_I2C_SPEED. The CONFIG_SYS_I2C_SOFT_SPEED is then used throughout the driver. Unfortunatelly, due to a typo in the driver, instead of defining CONFIG_SYS_I2C_SOFT_SPEED, an CONFIG_SYS_SOFT_I2C_SPEED was defined and therefore the driver failed to compile. The same applies for CONFIG_SYS_I2C_SOFT_SLAVE , where the swap happens as well. This patch fixes the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
generated by cgit v1.1 at 2024-11-06 12:17:44 +0000